ASAHI DENSO CZ197 ASSY Control Unit User Manual
- May 15, 2024
- ASAHI DENSO
Table of Contents
ASAHI DENSO CZ197 ASSY Control Unit
Product Information
Specifications
- Model: CZ197
- Manufacturer: ASAHI DENSO CO., LTD.
- Function: Immobilizer system to prevent theft
- Components: Control unit, Immobilizer key, Antenna
Product Usage Instructions
Overview
This product is equipped with an immobilizer system designed to prevent theft
and can be attached to a construction machine.
Components
- The Control Unit: This provides the function of user recognition using the Immobilizer Key.
- Immobilizer Key: Used for user recognition.
- Antenna: Part of the system for communication.
How to Use the Product
- Insert the Immobilizer Key (2) into the Control Unit (1).
- Ensure the Antenna (3) is properly connected.
- Follow the specific instructions in the user manual for further operation and setup.
Certification
- Manufacturer: ASAHI DENSO CO., LTD.
- Address: 6-2-1 Somejidai, Hamakita-ku, Hamamatsu, Shizuoka 434-0046, Japan
Website: http://www.ad-asahidenso.co.jp
FCC(USA) Certification:
Product Name: Control Unit ASSY T8VCZ197
This device complies with part 15 of the FCC Rules. Operation is subject to certain conditions as specified.
FAQ
Q: Can the Immobilizer Key be reprogrammed?
A: No, the Immobilizer Key is designed for security and cannot be
reprogrammed.
Q: How do I troubleshoot if the system fails to recognize the key?
A: Ensure the key is inserted correctly and not damaged. Check the
connection of the Antenna as well.
Revision history
Rev.| Date| Points
modified
| Changes description
---|---|---|---
00| 26.Jun.2023| | First Release
Overview
This product is equipped with immobilizer system designed to prevent theft.
This product can be attached to the construction machine.
The system is composed of:
- The Control unit (1), which provides the following function:
- User recognizer, by means of an Immobilizer Key (2).
- The Immobilizer key (2)
- The Antenna (3)
How to use the product
User owns the Immobilizer key (2).
When to start the engine of the construction machine, user hold the
Immobilizer key (2) over the Antenna.
At this time, Control unit (1) and the Immobilizer key (2) built-in chip
authenticate the code via the Antenna (3).
In case that the code inside the Immobilizer key (2) matches, engine starting
and construction machine operation can be possible.
In case that the code does not match, on the other hand, engine starting and
construction machine operation can’t be possible.
Certification
Manufacturer
Company Name | ASAHI DENSO CO., LTD. |
---|---|
Address | 6-2-1 Somejidai, Hamakita-ku, Hamamatsu, Shizuoka 434-0046, Japan |
Website | http://www.ad-asahidenso.co.jp |
Approval of each country
FCC(USA) certification
Product name | Control Unit ASSY |
---|---|
FCC ID | T8VCZ197 |
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF energy.