Double E SY-E570-003-04 Remote Control Car Series User Manual

June 6, 2024
Double E

Remote Control Car Series

Model: SY-E570-003-04

USER MANUAL

1. Main Parameters

  • Item No.: E570-003
  • Material: plastic and electronic components
  • Batteries: Car battery: 3.6V AA rechargeable battery;
  • Remote controller battery: 2 pcs of  l.5V AA batteries.

Remote Control

2. Battery Installation

  1. Open the Cover of battery case locates in the back of controller, inserts 2 pcs of  1.5V AA batteries into the battery case, and then screw the cover (Fig 2A).
  2. Please screw out the cover at the back of car by screwdriver, open the cover as the arrow showed, insert 1 pcs of 3.6 V AA battery, then screw the cover (Fig 2B).

Battery Installation

Battery Installation

Notice: This product shall be charged for 2 to 3 hours. The supporting USB charger shall not be used for other devices other than this product.

3. Basic Operation & Functions

Basic Operation & Functions

  1. Turn ON/OFF
    Press the ON/OFF key, there will be a start-up sound; to press the key again after starting. (Fig 3A)

  2. HornKey
    To press the Horn Key on remote controller after starting the car, the car would emit a simulated sound.

  3. Forward/Backward
    To push the Left Handle forward/backward, the car would go forward/backward.(Fig 3B)

  4. Turn Left/Right
    To push the Left Handle forward/backward, Right Handle turns left/right, the car would turn left/right. (Fig 3C).

  5. Up & Down of Carriage
    After starting the car, to press the key of Up & Down, the car would go up & down with a mechanical sound. (Fig 3D)

These functions could be multiple used for simulating operation.

multiple used

5. Recharging Fig3D

Notice: Please push the power switch to “OFF” position if the product will not be used for a long time. Take the batteries out of the remote controller and the truck for storing. Please charge the battery for 4 to 5 hours, 8 hours for initial use.

6. Notice

  1. Don’t play the toy on the road, select a safe place for operating to avoid dangerous.
  2. lays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car.
  3. If abnormal speed or reaction, it may be because of insufficient battery power, please charge the battery.
  4. The batteries should be charged under adult supervision. Please use the batteries recommended.
  5. Please install the battery in a correct polarity.
  6. Do not mix new and old batteries together, short-circuited.
  7. Please charge the battery before initial use.
  8. Please check the plug, case and other units of charger regularly to make sure that it is not broken.Don’t use again if you find abnormality of the charger.
  9. Please do not connect the product to different performance power.

Frequency bands : 2405MHz to 2475MHz
Maximum output power: -1.sasm (Declaration for Europe)

Manufacturer: Dou bleeagle Industry (China) Limited.
Address: Xingda Industrial Park, Chenghai
District, Shantou City, Guangdong Province, China.

Importer: JAMARA e.K.
Address: lnh. Manuel Natterer
Am Lauerbuhl 5 – DE-88317 Aichstetten
CHOKING HAZARD-small parts, not for children under 3 years.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals