FOSSiBOT F3600 Pro Portable Power Station User Manual

: August 6, 2024
: FOSSiBOT

Table of Contents

FOSSiBOT F3600 Pro Portable Power Station
Product Usage Instructions
Use precautions
AC Output Parameters
Package List
Product Introduction
Button Function Introduction
Introduction to the Display Screen User Interface
Troubleshooting Table
UPS Mode
Battery Pack Connection Instructions
Car Charging
Product Parameters
After-Sales Card
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FOSSiBOT F3600 Pro Portable Power Station

Specifications

Product Name: DC Switch
DC Output Port Activation: Short press the DC button
Maximum Power Output: 11520Wh
Capacity: 3840Wh (3 x 3840Wh)

Product Usage Instructions

Activating the DC Output Port
To activate the DC output port on the panel, follow these steps:

Locate the DC button on the panel.
Short press the DC button to activate the DC output port.

Frequently Asked Questions (FAQ)

Q: How do I know if the DC output port is activated?
A: When you short press the DC button, check for a visual indicator or a power output signal to confirm that the DC output port is activated.
Q: What is the maximum power output of the DC Switch?
A: The DC Switch has a maximum power output of 11520Wh, with a capacity of 3840Wh (3 x 3840Wh).

N091_Host Manual (Chinese)_ Vl.01
Material: 128g copper plate paper, single-color doublesided printing;
Binding method: Saddle stitching;
Finished size: 145*210mm;

F3600 Pro
Portable Power Station
User Manual

Dear Customer, thank you very much for purchasing and experiencing the F3600 PRO portable power station product. Before using this product, please read the manual carefully for correct usage.
In accordance with the transportation requirements for battery products, the product is shipped with a battery level of only up to 30%. After unpacking the product, please fully charge it to start the F3600 PRO experience journey.

Use precautions

Please avoid storing and using this product in high-temperature, high-humidity, or direct sunlight environments for an extended period to prevent a shortened battery life and other malfunctions. The product should not be placed near a heat source, as it may lead to significant fires or accidents.
It is strictly prohibited to disassemble or modify this product. Improper handling may result in product malfunctions or even fires.
Be careful not to drop the product from a high place or let it fall to prevent damage.
Please store or use this product in a place inaccessible to children to prevent potential harm caused by the product’s drops and collisions.
Please use the original accessories from our company. The use of
non-original accessories may result in product defects, and we will not provide warranty service.
Please directly connect the product to electrical outlets on walls or similar locations for charging, avoiding the use of extension cords or cable splitters. Otherwise, there is a risk of damage to the extension cord and cable splitter, even leading to a fire. If using a power strip to charge this product, do not connect other appliances to the same power strip, as there is a high likelihood of tripping the household circuit breaker.
When the product is not in use or idle, please set the product’s power to the OFF state and unplug the power cord. If it needs to be stored for an extended period, discharge the product from a full charge to an empty state, then recharge it to around 50% battery capacity for storage. To extend the product’s lifespan, please follow this operation and storage procedure every three months.
If the product reaches the end-of-life conditions, please dispose of or recycle the product according to local laws and regulations.

AC Output Parameters

Package List

Product Introduction

This product is a Portable Power Station with a built-in battery pack that features charging and discharging functions. It includes both AC alternating current output interfaces and direct current output interfaces such as USB output, cigarette lighter output, and DC output. Additionally, it incorporates functions such as display, interface control, protection, and alarms. This product can be charged through various methods such as mains power, solar panels, and Car charging. It can support up to two battery packs simultaneously, with a maximum capacity ofup to 11520Wh.
Below are the main features of this product:

Utilizing lithium iron phosphate battery cells, the battery capacity reaches up to 3840Wh, and with additional capacity, it can reach a maximum of 11520Wh, meeting the daily energy needs of a single household.
Pure sine wave output, suitable for daily electronic devices and small household appliances.
Utilizing bidirectional fast charging technology, the product can be fully charged in approximately 2 hours.
USB-A, Type-C, PD3.0, DC5521, XT60, cigarette lighter socket, and other versatile output interfaces, catering to various application scenarios.
Equipped with UPS function, with a switch time ofless than lOms, achieving seamless switching.
Multiple protection mechanisms for the battery, circuit, and structure ensure the safety of the product.

Button Function Introduction

Power on/off Button
USB Switch
Light Switch (Controls LED Light)
DC Switch
LCD Screen
Input Power Adjustment Knob
Heat Dissipation Duct
AC Switch (Manual Switching 50/60Hz]
XT90 Port
AC Input
Overload Protection Button
Battery Pack Interface
Power on/off Button
Usage: Press and hold the power button for 3 seconds to wake up the sy stem, turn on the LCD display, press and hold again for 3 seconds to close.
USB Switch Usage:
Short press the USB button to open the USB panel output port, press again to close.
Light Switch Usage:
Press the Light button briefly to turn on the LED light at full brightness. Press again to enter SOS mode, press sequentially to enter strobe mode, and finally, press to turn off the LED light (In any mode, press and hold the LIGHT button for 1 second to turn off the LED light directly).
DC Switch Usage:
Short press the DC button to activate the DC output port on the panel; press again to close.
LCD Screen
Displays the product’s battery level and provides usage status prompts.
Input Power Adjustment Knob
When this product is connected to the mains for charging, you can manually adjust the input power by rotating the knob. Clockwise rotation increases the input power, while counterclockwise rotation decreases it. It is worth noting that charging this product at low power is beneficial for extending the battery life.
Heat Dissipation Channel
When the product reaches the temperature threshold set by the system, the cooling fan will automatically operate, accompanied by a certain level of fan noise. During the use of this product, avoid blocking the cooling intake/exhaust vents, and do not place objects within a range of 30CM.
AC Power Switch
Press the AC button to activate the AC output function. Due to possible differences in AC output frequency in different regions, follow these steps to switch frequencies: Hold down the AC button for 3 seconds to enter the frequency switching mode. The SO Hz or 60Hz icons will flash on the display. Press the AC button again to select SOHz or 60Hz. When the icons stop flashing, and it displays SOHz or 60Hz, the switch is successful.
(Short press the AC button 10 times to enter 220V /230V voltage switching.)
xT90 Port
This interface supports solar panel input or car charging input. For details, please refer to the 9th page ‘Solar Panel Connection’ and the 10th page ‘Vehicle Charging’ in this document.
AC Input
Connect the product to a household socket for charging, achieving a rapid charge of 2200W (220V-240V), and charging from Oto 100% in approximately 2 hours. When charging in this way, please pay attention to the following points.
- Please directly connect the product to a wall socket for charging, avoiding the use of extension cords or cable joints, as there is a risk of damage or even a fire in the case of extension cord or cable joint breakage.
- If connecting to a power strip for charging, do not plug in other appliances into the power strip, as there is a high likelihood of tripping the household circuit breaker.
Overload Protection Button
Due to lightning or other reasons causing unstable current supply, in the case of high current input at the AC end, to protect this product, the overload protection function (safety circuit breaker) will activate and disconnect the AC input port.
Please restore the AC input function of this product following the steps below.
Turn off the power switch and unplug all cables from the ports.
After confirming that each part is normal, turn on the power switch.
Press the overload protection button to restore AC input by connecting the AC cable.
Battery Pack Interface
Expansion is achieved by connecting to the main unit through a parallel cable. This interface can achieve a maximum input and output of 4000W.

Introduction to the Display Screen User Interface

AC Charging
XT90 Interface
Bluetooth
WIFI
Battery Level In dicator
AC Output
DC (12V) Output
USB Output
PD3.0 Output
Host Indicator
Expansion Battery
Battery Percentage
Remaining Use/Charge Time
High/Low-Temperature Protection
Fan Status
XT60 (12V) Output
Cigarette Lighter (12V) Output
LED Light
Input Total Power
Output Total Power

Screen Display Explanation
Battery Level Display: When this product is in charging mode, the battery progress bar continuously rotates in a clockwise manner, and the battery percentage gradually increases. When the product’s battery level is 0, the battery percentage icon will blink.
Input and Output Status: When the product is operating, the total in put power, total output power, and the cursor for the corresponding wo rking area will be displayed on the screen.
Alarm Prompt: Refer to the troubleshooting table below for details.

Troubleshooting Table

UPS Mode

UPS function
This product has the function of a backup uninterruptible power supply (UPS). The usage and operational precautions are as follows:
As shown in Figure 1 below, when connected between the power outlet and the electrical appliance, with the product’s power and AC switch both in the ON position, the product enters UPS working mode. The mains power in the socket supplies power to the electrical appliance through the bypass circuit, while also charging the product.
In this operating state:
The rated power of the electrical appliance must be less than 2500W ( only 220V ~ 240V), otherwise it may trigger overload protection. As shown in Figure 2 below, when the utility power at the socket end is disconnected, the internal bypass output of the product stops working. The product switches to the bidirectional inverter circuit within 10ms, and this circuit provides power to the electrical appliance. This ensures that the electrical appliance remains powered and operates normally during this process.

Battery Pack Connection Instructions

The host can connect up to two battery packs through a parallel connection, with a maximum capacity of up to 11,520Wh. Please connect the product when both the host and the battery packs are powered off. After the connection is complete, the screen will display “Sl, S2 connected,” indicating successful parallel connection. Once paralleled, the system can begin charging or discharging. During charging or discharging after paralleling, the power will be distributed according to the amount of battery capacity.
When charging, the charging power is lower for products with high battery levels, and when discharging, products with high battery levels have higher output power. If there is no external charging, there may be a short-time power exchange between the host and slave machine.

Precautions

Do not plug or unplug the parallel cable while the product is operating. Please connect or disconnect the product only when it is in the powered-off state.
Do not short-circuit the parallel port of the host.

Solar Panel Connection
In conditions of sufficient sunlight, this product can be connected to a solar panel to facilitate charging. The charging power is determined by factors such as sunlight and weather conditions.
In this charging mode, we support solar panel inputs up to 2000W, and the input voltage should not exceed 160V; otherwise, any resulting product anomalies will not be covered by the warranty.

We recommend adopting the following two charging schemes:

Solar Panel Charging

Option One

Option Two

Car Charging

When the car is in the starting state, you can charge this product by connecting the car charging port on the car to this product using the vehicle charging cable, as shown in the diagram.
This product supports 12V car charger/24V car charger charging. When using this charging method, please pay attention to the following two points.

Please perform this operation with the car in the ‘ON’ state, as otherwise it may lead to the depletion of the car battery.
The power of car charging is usually in the range of 90W-120W, resulting in a longer charg ing time.
If rapid charging is needed, it is recommended to use mains power.

Product Parameters

Battery Specifications

APP Connection

After-Sales Card

After-sales card

This product provides a 24-month warranty service from the date of purchase.

If there are quality issues within normal usage range, we provide warranty service.
After purchasing our company’s product, please keep the product together with the invoice and other related items. If repair service is needed, please provide the required documents according to our company’s specifications.
If the warranty certificate is damaged or altered, and there is no official stamp from the selling store on the warranty certificate, warranty service will not be provided.
Damages caused by exceeding normal usage parameters are not covered by the war ranty service.
The content within the scope of the warranty is subject to approval by our company.
Even within the warranty coverage, there may be instances where a product with si milar functionality is provided. Shipping and repair costs for products outside the warranty coverage are the responsibility of the customer.
At times, product specifications and features may be updated without prior notice.

Disclaimer
Before using, please read the user manual of this product to ensure a complete understanding of correct usage. After reading, please store the manual safely for future reference. Failure to operate this product correctly may cause serious harm to yourself or others, leading to product and property losses. Once using this product, it is considered that you have understood, accepte
d, and agreed to all the terms and content of this document. Users commit to being responsible for their actions and all consequences arising from them. Our company is not liable for any losses
incurred due to users not following the product manual.
In compliance with legal regulations, our company reserves the ultimate right to interpret all documents related to this document and the product. In the event of updates, revisions, or termination, no separate notice will be provided. Please visit our official website for the latest product information.
Manufacturer: Shenzhen Qichang Intelligent Technology Co., Ltd.
Address: Building 7, Yunli Intelligent Park, No. 7 Changfa Middle Road, Yangmei Community, Bantian Street, Longgang District, Shenzhen
Technical Service Email: support@fossibot.com
Company Official Website: https://www.fossibot.com

https://eu.fossibot.com/