Double E SY-E568-003-03 Radio Control Toys User Manual

June 5, 2024
Double E

Double E SY-E568-003-03 Radio Control Toys User Manual
Double E SY-E568-003-03 Radio Control Toys

Main parameters

  • Item No.: E568-003 Material: plastic and electronic components.
  • Batteries: Car battery: 4.8V AA rechargeable battery ;
  • Remote controller battery: 2 pcs of 1.5V AA batteries.

Remote Controll

Product Description

Battery Installation

  1. Open the cover of battery case locates in the back of controller, inserts 2 pcs of 1.5V AA batteries into the battery case, and then screw the cover (Fig.2A).
  2. Please screw out the cover at the back of car by screwdriver. open the cover as the arrow showed. insert 1 pc of 4.8 V AA battery, then screw the cover (Fig.2B).
    Battery Installation
    Battery Installation

The toy is to be connected to Class II equipment bearing the symbol

Notice: This product shall be charged for four to five hours.The supporting USB charger shall not be used for other devices other than this product.

Basic Operation and Function

  1. After installing the batteries of truck and remote controller, open the switch of both. The indicator of remote controller and the fronts lights of truck would be flashing slowly, and then at a state of auto-coded. When the car with a sound of DI-DI, it means the auto-coding is successfully.
  2. One remote controller only could code one car. After the success of coding, there is non-interference of each car.
  3. If the remote controller could not find out the 2.4G signal of the car in 1 minute, it would turn in a sleeping state(light off of the indicator). To press any key to activate.
  4. To remake a pair with other cars or remote controllers after turning off the power of both.
    Battery Installation

Advanced Functions

Horn Button|

| Advanced Functions
---|---|---
Mute Function|

|

Advanced Functions

Forward| |

Backward|

|

Turn left|

|

Turn Right|

|

 Excavating|

|

Unloading|

|

Left Rotation|

|

Right Rotation|

|

Rise button of small arm|

|

Drop button of small arm|

|

Rise button of large arm|

|

Drop button of large arm|

|

Advanced features

  1. Auto-OFF:
    • After starting, the excavator would automatically shut down without receiving any signal in 60 seconds. To reactivate by pressing any keys.
  2. Multi-playing Function
    • Many productions could be played together at the same time since they are remote controlled by 2.4Ghz frequency.

Recharging

Notice: Please turn the power switch to “OFF”position if the product will not be used for a long time.Take the batteries out of the remote controller and the excavator if they are stored for a long time.

Notice
  1. Don’t play the toy on the road, select a safe place for operating to avoid dangerous.
  2. Plays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car.
  3. If abnormal speed or reaction, it may be because of insufficient battery power, please charge the battery.
  4. The batteries should be charged under adult supervision. Please use the batteries recommended.
  5. Please install the battery in a correct polarity.
  6. Do not mix new and old batteries together, short-circuited.
  7. Please charge the battery before initial use.
  8. Please check the plug. case and other units of charger regularly to make sure that it is not broken.Don’t use again if you find abnormality of the charger.
  9. Please do not connect the product to different performance power.

CHOKING HAZARD – small parts, not for children under 3 years.

Specifications colors and contents may vary from illustrations.

  • Operation Frequency: 2405MHz-2475MHz
  • Max. Output Power: -3.09dBm (for EU compliance)
  • Manufacturer: Doubleeagle Industry(China)Limited.
  • Address: Xingda Industrial Park ,Chenghai District, Shantou City, Guangdong Province, China.
  • Importer: JAMARA e.K.
  • Address: Inh .Manu el Natterer Am Lauerbuh15-DE-88317 Aichstetten Germany
    CHOKING HAZARD-small parts, not for children under 3 years.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals