Double E E519-003 RC Wheel Loader Instructions
- June 6, 2024
- Double E
Table of Contents
Double E E519-003 RC Wheel Loader Instructions
FUNCTIONS
- Omni-directional Remote Control
- Forward/backward
- Turn Left/Right
- Loading
- Unloading
- Starting sound
- Trumpet sound
- High simulated sound
- DEMO function
- Auto shut-down function
BATTERY WARNINGS
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Rechargeable batteries are to be removed from the toy before being charged.
- Different types of batteries or new and used batteries are not to be mixed.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- The toy is not to be connected to more than recommended number of power supplies
- The toy is not intended for children under 3 years old.
- Regular examination of transformer or battery charger for any damage to their cord, plug, enclosure and other parts, they must not be used until the damage has been repaired.
- Do not mix old and new ballades.
- Do not mix alkaline battedes.standard (carbon-zinc) or rechargeable batteries.
INSTRUCTIONS
- Install 1 pc of 4.8V AA rechargeable battery into the battery case on thechassis, and then screw the battery cover.
- Install 2 pcs of 1.5V AA batteries Into the controller, and then screw the battery cover at the bottom of remote controller.
- Turn on the switch of the truck and remote controller.
- To play the truck by remote controller.
WARNING:
CHOKING HAZARD – small parts, Not for children under 3 years.
Notice: Battery needs to be charged for the first time use. Images are
for reference only and may differ from the real product, specific please
prevail in kind.
Please retain this packaging as it contains Important information.
Load 1PC of 4.8V rechargeable battery pack as per the correct polarity of the
battery. (Batteries are included ) Charging for battery pack Inside the car
body
Insert two 1.5V AA batteries and make sure to match the polarity direction. (Batteries are not included)
Instruction of 2.4GHz Auto-coding
- After installing the batteries of truck and remote controller, open the switch of both. The indicator of remote controller and the fronts lights of truck would be flashing slowly, and then at a state of auto-coded. When the car with a sound of DI-DI, it means the auto-coding is successfully.
- One remote controller only could be coded one car. After the success of coding, there is non-interference of each car.
- If the remote controller could not find out the 2.4G signal of the car in 1mInute, It would turn in a sleeping state(light off of the indicator). To press any key to activate.
- To remake a pair with other cars or remote controllers after turning off the power of both.
The toy S to be connected to Class 1 equipment bearing the symbol!
Manufacturer: Doubleeagle Industry (China) Limited Address: Xingda Industrial
Park, Chenghai District, Shantou City, Guangdong Province, China.
Website: www.t.doubleeagle.cc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>