VITEK VT-TR2HA3281 Transcendent Series 2 MP 32 Ch 5 In 1 Digital Video Recorder User Guide
- June 6, 2024
- VITEK
Table of Contents
VT-TR2HA3281
Transcendent Series 2 MegaPixel
32 Channel 5-in-1
Digital Video Recorder
QUICK START GUIDE
KEY FEATURES:
- 32 Ch. HD-TVI / AHD / CVI / CVBS BNC Inputs Supporting up to 5MP Lite + IP Support
- 8-Channel Additional IP Camera Support up to 5 MegaPixel @ 30fps (40 Cameras Total), with Ability to Change up to 16 HDA Inputs into IP Inputs
- Recording: 5MP Lite: 320fps, 4MP Lite/1080P: 480fps, 1080P Lite/720P/WD1: 960fps
- HDMI (1920×1080,1280×1024), VGA (1080P), and BNC Spot Video Output
- Simple plug and play, point-to-point connection from camera to DVR
- H.265 High Profile Compression
- Fully Programmable Intelligent Analytics including Object Removal / Museum Search, Exception, Line Crossing, and Area Intrusion Detection (IP Camera Dependent)
- 2-Way Audio
- Audio In: RCA × 16 [Multi Pin Whip-Style Audio Breakout Connector DB25 to RCA] + Output: RCA × 1 Connector is Included
- Free VMS (Video Management Software) Lite and Standard versions available for organized viewing of multiple sites [For Enterprise version please contact your Vitek Reseller]
- PTZ Control over RS-485 / Control over Coax (CoC)
- 16 Alarm inputs / 4 Alarm Outputs
- Pentaplex: Live Display / Record / Playback / Backup / Remote Access
- 8 SATA2/3 HDD Slots supporting up to 80TB (8 x 10TB HDD) Internal Storage + 1 x e-SATA
- Applications for iOS & Android®
- Remote Viewing over the Internet via Web Browser or LAN
- Mac OS® Client & CMS Central Management Software Included
- Supports both Dynamic and Static IP Addresses
- Control locally via USB Mouse or IR Remote control
- 3 Year Warranty
SETUP & CONFIGURATION:
1. Notes
- Please read this instruction carefully for correct use of the product and preserve it for reference purposes.
- This manual is suitable for 4/8/16/32 CH HD Hybrid DVRs. All the examples and pictures used here are for reference only.
- There may be technically incorrect parts or printing errors in this manual. The updates will be added to the future versions of this manual. The contents of this manual are subject to change without notice.
- To prevent electric shocks and risk of fire hazards, do NOT use a power source other than that specified.
2. Check Package Contents
Please confirm that the device and all accessories are included in the
package. If there is any damage, shortages, or defects, please contact your
distributor immediately.
- Transcendent Series DVR
- IR Remote Control
- Quick Start Guide
- Power Supply
- USB Mouse
- Rack Ears
- DB25 Audio Connector [see below]
3. Rear Panel Connections
4. Startup & Shutdown
Startup
- Connect a monitor and the power.
- The device will boot up and the power indicator will display blue.
- A wizard window will pop up.
Shutdown
Go to “Main Menu” and then select the “Shutdown” icon. This will bring up a
shutdown window. The device will shut down by clicking the “OK” button. Then
disconnect the power.
5. Login
You must configure the wizard when you start the DVR for the first time.
You can skip the settings of the wizard next time. The default username is
“admin” and the password is set by you when you configure the wizard for the
first time. Click “Start” and select “Login”. This will take you to a login
box. The default username is “admin”, and the default password is “123456”.
Enter username and password and click the “Login” button to go to the main
menu setup.
6. Analog
Camera Connection First connects the cameras to the DVR. Then 90 to Start —.
Settings —) Camera —) Manage Camera —) Signal Access Set to checkmark the
video mode. The actual signal input shall correspond to the video mode. Please
refer to User Manual for details.
7. Network Configuration & Adding IP Cameras
LAN.
1 Set the network of the DVR. Go to Start —. Settings —0 Network —TCP/IPv4.
Input IP address, subnet mask, gateway, etc. If using DHCP, please enable DHCP
in both the DVR and the router.
2 Go to Start Settings —. Network —, Port. Input HTTP port (the default value
is 80), server port (the default port is 6036).
3 Click “Apply” to save the settings.
4 Go to Start —. Settings —. Camera Add Camera. The DVR will automatically refresh the cameras searched. The IPC which supports the Onvif protocol may be added manually. If the IPC searched is not in the same local network as the DVR, you should select the device and click to modify the IP address.
5 Highlight the device you want to add and then click the
“Add” button. The DVR will automatically refresh the cameras and return to the
“Edit Camera” interface. “Online” status means connecting the device
successfully and you will see the live image. You may select the added device
and click to modify channel, IP address etc.
► WAN
- Set the network of the DVR. Go to Start — Settings Network —. TCP/IPv4. Input static IP address or enable PPPoE and then Input the user name and password received from your ISP.
- Go to Start —Settings —. Camera. Click “Add Camera” and select “Manually Add” to add IP cameras. Input IP address. server port. username and password of the IP camera. The IP camera must be connected over WAN. And here the IP address of the IP camera must be a WAN IP address.
8. UPnP
You can use the UPnP function to enable a fast connection of the device to WAN
via a router without port mapping.
-
Go to Start Settings -) Network -) UPnP, and enable UPnP and then click the “Apply” button to save.
-
Enable the UPnP function in the router.
-
Click Refresh” button to refresh the UPnP status. If the UPnP status is still “Invalid UPnP” after refreshing it several times. the port would be wrong. Please change the mapping type to “Manual” and then dick to modify the port until the UPnP status turns to ‘valid UPnP’.
9. NAT
► NAT Settings
-
Make sure the DVR is powered and connected to a network.
-
Go to Start Settings -. Network TCP/IPv4. You can obtain the IP address subnet mask and gateway automatically. You can also manually enter them according to the actual network situation. Please make sure the network segment is the same as that of the network which is used.
-
Set the preferred or alternative DNS Server. Click “Apply to save the parameters.
-
Go to Start -. Settings —) Network NAT tab. Enable NAT and select the NAT Server (The default NAT Server is nat.auto-nat.com). Click “Apply to save the parameters.
► NAT Access
After finishing the NAT settings, you can input
www.autonat.com in the IE address bar and then press
enter to go to the following interface. If this is the first time accessing
the NAT, you need to download and install the Plug-in according to the popup
tips. After installing the Plug-in successfully, it will display the login
box.
Device Serial Number:
Click on the menu bar at the bottom of the live interface to check the serial
number or go to Start Settings —* Network —Network Status to check the serial
number of the DVR). Username: The username of the DVR. (Default: admin)
Password: The password of the DVR. (Default: 123456)
10. Playback
► Instant playback Click “Instant Playback” in the right-click menu of the
camera’s preview window to select.
►General playback Click on the toolbar at the bottom of
the live preview interface or click Start —. Playback to go to the playback
interface as shown. You can also add the playback cameras manually. Click in
+
the playback window to pop up the “Add Camera” window. Check the cameras
in the window and then click “Add” to add a playback camera. The recorded
files of the added playback camera will be played in the playback interface.
DETAILED SPECIFICATIONS
Video Inputs
IP Camera Support
Compression
Recording (5MP Lite)
Recording (4MP Lite / 1080P)
Recording (1080P Lite) / (720P)
Local Playback
OS
Video Output
Multi Operation
Audio
Two-Way Audio
Bit Rate
Encode
Quality Levels
Recording Modes
Search
Function
Alarm In/Out
Alarm Modes
Alarm Triggering
Network Interface
Remote Viewing
Remote Playback
Dual-stream
Remote Users
RS485
PTZ Protocol
Network Protocols
SATA HDD
USB
Accessories
Power Consumption
Power Supply
Working Environment
Dimensions (W × D × H)
Weight: Net / Gross| VT-TR2HA3281
32 Channels HD-TVI/AHD/CVI/Analog BNC Inputs Supporting up to 5MP Lite
8 IP Cameras (5MP @ 30fps)
H.265 High profile
320fps: 10fps per channel
480fps: 15fps per channel
960fps: 30fps per channel
16 CH
Embedded Linux
1 x HDMI (1080p) / 1 x VGA (1080p) / 1 x BNC Spot (Analog)
Pentaplex: Live Display / Record / Playback / Backup / Remote Access
Input: RCA × 16 [Multi Pin Whip-Style Audio Breakout Connector DB25 to RCA –
Accessory is Included] + Output: RCA × 1
Yes
32Kbps ~ 8Mbps
VBR / CBR
6 level
Manual, Timer, Motion, Sensor
Time Sliced, Time, Event, Tag Management
Play, Pause, FF, FB, Shutter Control, Jog, Digital zoom
16 Alarm inputs / 4 Alarm Output
Sensor, Motion, Video loss
Record, PTZ move, Relay out, E-mail, etc
RJ45 x 1
CMS / Web Browser / Mobile Platforms
16CH
Individual Network Video Stream and local recording stream, set separately
10 users online, dual stream
RS485 x2 (for PTZ)
Control over Coax, Pelco D / Pelco P
TCP/IP, UDP, DHCP, DNS, PPPOE, DDNS, SMTP, RTSP, HTTP
Up to 80TB (8 x 10TB) + E-SATA x 1
USB 2.0 x 2 [1 front + 1 rear] Remote controller, SATA cable, USB mouse
≤ 30W (Without HDD)
ATX 250W
14ºF~122ºF (-10º~50ºC) / 10~90% RH
17.52 × 17.17 × 3.54” (445 × 436 × 89mm)
13.23 lbs (6kg) / 17.17lbs (7.79kg)
---|---
CONSIDER THESE OTHER GREAT TRANSCENDENT PRODUCTS!
2MP HD OVER COAX “STARLIGHT” CAMERAS WITH MOTORIZED AND FIXED LENS
CONFIGURATIONS
VTC-THB2RMS
VTC-THT2RMS
LTD-THD2RMS
Transcendent 2.0 Megapixel Indoor/Outdoor 4-IN-1 Starlight Motorized
Lens Cameras
FEATURES
• 1/2.8” 2.0 MegaPixel Progressive Scan CMOS Sensor
• Advanced Starlight Technology Offers Dramatically Higher Sensitivity to
Light Producing Color Images in Very Dark & Night Scenes
• High Definition Analog (HDA): HD-TVI / AHD / CVI / CVBS (Selectable) Video
Output
• 2.8-12mm Motorized Varifocal Lens
• Matrix IRs with up to 165’ Range (VTC-THB2RMS),
Matrix IRs with up to 165’ Range (VTC-THT2RMS),
Matrix IRs with up to 100’ Range (VTD-THD2RMS)
• True Wide Dynamic Range (WDR)| • True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP67 Weather Resistance
IK10 (VTD-THD2RMS Only)
• Supports Up The COAX Control
• Over 1500’ HD Video Transmission (Depending on
cable characteristics and integrity)
• Optional Mounts Available (see rear page)
• 12VDC Operation
• 3 Year Warranty
---|---
VTC-THB2RFS
VTC-THT2RFS
Transcendent Series 2.0 Megapixel Indoor/Outdoor 4-in-1 Starlight Fixed Lens
Bullet and Turret Cameras
FEATURES
• 1/2.8” 2.0 Megapixel Progressive Scan CMOS Sensor
• Advanced Starlight Technology Offers Dramatically Higher Sensitivity to
Light Producing Color Images in Very Dark & Night Scenes
• 2.0 MegaPixel High Definition Analog (HDA): HD-TVI, AHD, CVI / 960H: CVBS:
Output
• 3.6 or 2.8mm Fixed Lens Options
• Matrix IR w/ up to 165’ IR Range (VTC-THBRFS) Matrix IR w/ up to 100’ IR
Range (VTC-THT2RFS)
• True Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• 3D-DNR Noise Reduction
• IP67| • VTC-THT2RFS available in Ivory or Charcoal
(VTC-THT2RFSB / VTC-THT2RFSB-2)
• Supports Up The COAX Control
• Over 1500’ HD Video Transmission (Depending on cable characteristics and
integrity)
• VTC-THB2RFS: Optional J Box VT-TJB08,
• VTC-THT2RFS: Optional J Boxes VT-TJB01, VT-TJB08, Wall Mounts VT-TWMT-3, VT-
TWMT-A1 (reqs. VT-TJB08), Pendant Mounts VT-TPDMT-A1 (reqs. VT-TJB08), VT-
TPDM-2 (with VT-TJB01)
- Both models work with VT-TPLMT (Pole Adapter, reqs.
VT-TJB08), VT-TCNMT (Corner Adapter, reqs. VT-TJB08)
• 12VDC Operation
• 3 Year Warranty
---|---
VTD-THD16R2F
Transcendent Series 2.0 Megapixel Indoor/Outdoor 4-in-1 Starlight Fixed
Lens Vandal Dome Camera *Shown with optional junction box, VT-TJB03A
1/2.8” 2.1 Megapixel Progressive Scan
CMOS Sensor
Advanced Starlight Technology Offers Dramatically
Higher Sensitivity to Light Producing Color Images in
Very Dark & Night Scenes
2.1 MegaPixel High Definition Analog (HDA): HD-TVI, AHD, CVI / 960H: CVBS:
Output
2.8 or 3.6mm Fixed Lens Options
16 SMD type IR LEDs w/ up to 65’ Range
True Wide Dynamic Range (WDR)
True Mechanical Day/Night function by ICR| 3D-DNR Noise Reduction
IP67 + IK10
Supports Up The COAX Control
Over 1500’ HD Video Transmission (Depending on
cable characteristics and integrity)
Optional J Box VT-TJB03A, Wall Mount
VT-TWMT-3, In-ceiling Semi Flush Mount VT-TFMT-S,
VT-TPLMT (Pole Adapter, reqs. VT-TJB03A),
VT-TCNMT (Corner Adapter,t reqs. VT-TJB03A)
12VDC Operation
3 Year Warranty
---|---
Limited Product warranty
VITEK products carry a three (3) year limited warranty. VITEK warrants to the purchaser that products manufactured by VITEK are free of any rightful claim of infringement or the like, and when used in the manner intended, will be free of defects in materials and workmanship for a period of three (3) years, or as otherwise stated above, from the date of purchase by the end-user. This warranty is non-transferable and extends only to the original buyer or end- user customer of a VITEK Authorized Reseller. The product must have been used only for its intended purpose, and not been subjected to damage by misuse, willful or accidental damage, caused by excessive voltage or lightning. The product must not have been tampered with in any way or the guarantee will be considered null and void. This guarantee does not affect your statutory rights. Contact your local VITEK Reseller should servicing become necessary. VITEK makes no warranty or guarantees whatsoever with respect to products sold or purchased through unauthorized sales channels. Warranty support is available only if the product is purchased through a VITEK Authorized Reseller.
https://vitekcctv.com/downloads/
PLEASE NOTE:
The complete manual can be found at:
www.vitekcctv.com
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
Version 1.0
Aug. 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>