NIVIKO R3490 Smart Watch User Manual

NIVIKO R3490 Smart Watch User Manual

Instructions for quick use of the bracelet

Component introduction

Charging method

For the first time, please take out the bracelet and charge the device with the corresponding charger. (Charger The formula is as follows: put the bracelet into the charger and align it with the two contacts of the charger to charge Electricity.)

Wearing method

1. The bracelet is best worn behind the styloid process of the ulna.
2. Adjust the size of the wrist according to the adjusting hole, Buckle the wrist strap.
3. The sensor should be close to the skin to avoid moving.

Precautions for heart rate monitoring:

During the test, the heart rate LED light on the back of the bracelet will flash. The sensor should be close to the skin to avoid external light affecting the accuracy of the test.

On/Off

1. When the bracelet is turned off, charge it or press the key for 3 seconds to start the device.
2. When the bracelet is turned on, switch to the power off interface or long press the key for 3 seconds, and the Enter the shutdown interface and confirm the shutdown.

Hand ring operation

1. When the watch is turned on, raise your hand or press the button to wake up the watch Dynamic switching interface.
2. The duration of the screen is 10.
3. The 24 hour heart rate monitoring is turned on by default when the bracelet is delivered from the factory, and the user can use Select Open or Close in the general settings of the interface.
4. APP can be set to “ON” or “OFF” to raise the hand to light the screen.

Install the bracelet APP

Scan the following QR code or enter each major application market to download and install “GloryFit”. Equipment requirements: iOS 9.0 and above; Android 4. 4 and above, compatible with Bluetooth5.3.
APP

Device connection

Open the APP, click “Device” – “Add Device” – “Select Device”, and click the corresponding type. And connect according to the prompts (see the following figure).

Bluetooth connection: After successful pairing, the APP will automatically save the Bluetooth address of the bracelet, and the APP will open or run in the  background Line, will automatically search and connect the bracelet.

Data synchronization: manually pull down the synchronization data on the APP homepage; The bracelet can store 7 days of offline data. The more data, the longer the synchronization- time, up to about 2 minutes.

Main function interface

Main interface

Main interface: The bracelet has five main interfaces. Press and hold for two seconds on the main interface to switch the table from left to right after shaking. After the disk and APP are paired and connected, the bracelet will synchronize the time, date, week and other information of the phone.

Massive dial/user-defined dial: open the APP, click “Device” – “Dial Settings” when the watch is connected, set “to enter the dial center to select or customize the dial.

Bluetooth call

You can make or receive calls directly from the watch, and the watch and mobile phone will dial synchronously in real time. App settings sync contacts.

Ai intelligent voice

After the successful connection between the watch and the mobile phone, the watch can directly conduct intelligent voice conversation or voice control Machine.

Information

Slide up the main interface to view the information. Click to view the details. You can select to delete the letter at the bottom of the information. The watch can save 8 pieces of information recently pushed by the APP, slide up the page, slide down to the end and return to the main interface noodles.

Physical exercise

Click to enter the sports interface. There are 24+sports in total. Select specific sports and click for three seconds to start monitoring. Press the upper corner button or slide to the right to pause, and click “Square Symbol” to end.

Status

Switch to the status interface to view the current steps, distance and calorie status. According to the current walking steps, the height and weight set by APP are calculated and displayed.

Heart rate

Switch to the heart rate interface to automatically detect the heart rate, and switch the menu to re measure it. APP can be set On or “Off” automatic detection and maximum heart rate reminder function.

Blood pressure

Switch to the blood pressure interface to automatically measure blood pressure, and switch the menu to re measure.

Blood oxygen

Switch to the blood oxygen interface to automatically measure the blood oxygen, and switch the menu to re measure. APP can be set On or “Off” automatic detection function, time period and cycle settings.

Sleep

Switch to the sleep interface to view deep sleep, light sleep, awake, eye movement and other states.

Weather

After the watch is linked to the mobile phone APP, the weather information is automatically synchronized to the watch. Switch to the weather interface to view the weather information.

Music

When the watch and mobile phone are connected, turn on the music control and press the play key to play music Stop, the last song, the next song.

Alarm clock

The watch can support up to three groups of alarm clocks, which can be added/deleted.

Body temperature

Switch to the body temperature to measure your temperature, also can view it on APP.

Set up

Setting items include:

1. Dial and theme,
2. Brightness adjustment,
3. Sound and vibration,
4. Hands up on screen,
5. Do not disturb mode,
6. language settings,
7. QR code,
8. System menu,
9. About.

Matters needing attention

• Please avoid strong impact, extreme high temperature and exposure to the sun.
• Do not disassemble, repair or modify the machine by yourself.
• The machine is charged with 5V500MA, and it is strictly prohibited to use overvoltage load power supply for charging. The operating environment of this machine is 0-45 degrees. It is forbidden to throw it into fire to avoid explosion.
• Please wipe the bracelet dry with a soft cloth before charging, otherwise it will corrode the charging contact Point, leading to charging failure.
• Do not touch gasoline, cleaning solvent, propanol, alcohol, insect repellent and other chemicals.
• If you have sensitive skin or wear the bracelet too tightly, you may feel uncomfortable.
• Do not wear a bracelet to take a hot bath and swimming.
• Please dry the sweat drops on your wrists in time. The wristband has been exposed to soap, sweat, allergens or dirt for a long time.
• • It may cause skin allergy and itching.
• If used frequently, it is recommended to clean the bracelet every week. Wipe with a damp cloth and remove the dye with mild soap, which may cause skin allergy and itching.
• No special needs, please do not open more push.

Common problem

What if the Bluetooth connection is not available?(Connection/reconnection failure or slow connection reconnection speed)

Confirm whether your device is IOS 9.0 and Android 4.4 or above and supports Bluetooth 5.0.

1. Due to the problem of signal interference in Bluetooth wireless connection, it may take a long time to connect each time, such as If the connection fails for a long time, please ensure that the operation is carried out in an environment without magnetic field or interference from multiple Bluetooth devices.
2. Turn off Bluetooth and turn it on again.
3. Close the background application or restart the phone.
4. Do not connect the mobile phone to other Bluetooth devices or functions at the same time,
5. Whether the APP runs normally in the background. If not, it may not be connected.

Can’t find the bracelet?

1. Because the bracelet Bluetooth has not been found by the mobile phone, please make sure that the bracelet is powered, activated and not bound to other mobile phones, and then close the bracelet to the mobile phone. If it is still invalid, please turn off the mobile phone Bluetooth, restart the mobile phone Bluetooth in 20 seconds.
2. Please make sure your phone turns on GPS.

Why should I wear the bracelet tightly when measuring my heart rate?

The bracelet uses the light reflection principle to collect the signal reflected to the sensor after the light source penetrates the skin Calculate your heart rate. If you don’t wear it tightly, ambient light will enter the sensor, which will affect the measurement accuracy Degrees.

Why did you not receive a reminder when the reminder function was enabled?

Android phone: confirm that the phone is connected to the bracelet, and then open the corresponding right in the phone settings Limit, allow “GloryFit” APP to access incoming calls, SMS messages and contacts, and keep “GloryFit” in Background operation; If your phone has security software installed, please add “GloryFit” as a trust.

Apple mobile phone: If there is no reminder after connecting, it is recommended to restart the phone to reconnect and reconnect the bracelet When the phone pops up [Bluetooth pairing request], click [pairing] to be reminded.

Is the bracelet waterproof?

Support IP67 dustproof level (you can wear it when you wash your hands, rain or car under normal circumstances).

Does the Bluetooth connection need to be always on? Is there any data after disconnection?

Before data synchronization, the data is retained on the bracelet host (data can be retained for seven days). When mobile phone and hand When the Bluetooth connection of the ring is successful, the bracelet data will be automatically uploaded to the mobile phone. Please synchronize the data to the mobile phone in time.

Note: If you enable the call and SMS reminder functions, you must keep Bluetooth connected. Clock reminder supports offline.

FCC ID: 2BDSQ-NVK-R3490
NVK-R3490 SMART WATCH

Documents / Resources

| NIVIKO R3490 Smart Watch [pdf] User Manual
R3490 Smart Watch, R3490, Smart Watch, Watch
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>