EYENIMAL NGFON012 Smart Bloom Pet Fountain User Manual
- May 15, 2024
- EYENIMAL
Table of Contents
EYENIMAL NGFON012 Smart Bloom Pet Fountain
Specifications:
- Brand: Smart Bloom
- Product Name: Pet Fountain
- Model Number: NGFON012
- Compliance: FCC Part 15
Product Usage Instructions
Composition:
The Smart Bloom Pet Fountain consists of the following components:
- Nozzle Flower
- Nozzle Pipe
- Lid no. 1
- Lid no. 2
- Filter
- Pump
- Bowl
- Base
Installation:
- Remove all parts from the bowl and clean the inside thoroughly with clean water.
- Add water as needed, do not exceed the maximum level.
- Place lid no. 2 on the bowl.
Operation:
Cleaning and Maintenance:
Regularly clean the fountain depending on usage. Replace the carbon filter
every month for optimal performance. Clean the fountain with warm soapy water
every two weeks. Clean the pump weekly to ensure longevity.
FAQ:
Q: How often should I clean the fountain?
A: The cleaning frequency depends on the number of pets using the
fountain. It is recommended to clean it regularly, with more frequent cleaning
for higher usage.
Q: Where can I buy replacement filters?
A: Replacement carbon filters can be purchased online at NUM’AXES website
or from your local retailer.
Thank you for choosing an EYENIMAL product. Before using it, please read these instructions carefully and keep this guide for future reference.
Components
Assembly
- Remove all parts from the bowl
- Add water as needed. Do not exceed the maximum water level.
- Place the lid on the bowl.
- Rinse the filter thoroughly with cold water to remove any loose charcoal dust.
- Place the filter on top of the lid and press down firmly.
- Place the fountain tray through the lid’s opening, making sure the tube connects to the pump outlet. Insert either flower or short nozzle.
- Connect the cable to power supply adapter and plug the adapter into an electrical outlet.
2 different settings for water flow
- A. Insert the flower to create a fountain-like stream for drinking.
- B. Insert the short nozzle to create a gently flowing water surface for drinking.
Indicator lights instructions
- A. FILTER: when this indicator light is blinking, turn the power off and replace the filter. Long press the reset key to reboot product.
- B. NORMAL MODE/REGULAR INTERVALS MODE: in normal mode, this indicator lights up in white. In regular intervals mode, the indicator lights up in blue. When the fountain is in water shortage, it will blink to prompt you to add water.
- C. RADAR MODE: in radar mode, this indicator lights up in white. When the fountain is in water shortage, it will blink to prompt you to add water.
- D. NIGHT LIGHT/RESET: press this button to turn the night light on. After replacing the filter, press the reset button for 2 seconds until the indicator stops blinking.
- E. ON/OFF SWITCH: press this button to turn product on and to change operating mode. Long-press to turn product off.
| Operating modes | Filter replacement time |
|---|---|
| Normal | Keeps working continuously. |
| Regular intervals | Works for 2 minutes then switches to standby for 3 |
| minutes. | 75 days |
Radar
| Works for 90 seconds whenever your pet enters the sensor area. Pauses for 15 seconds if the pet stays into
the sensor area.
|
30 days
Cleaning and maintenance
You should clean your fountain regularly. The cleaning frequency depends on the number of animals that use the fountain. The greater the number of animals that use it, the more frequently you will need to clean the fountain.
Filter: for an optimal use of the fountain, the charcoal filter must be replaced every month. You can purchase a set of 6 filters from your retailer at any time or on NUM’AXES website at www.numaxes.com.
Fountain: clean your fountain ideally every 2 weeks using warm soapy water.
Pump: you should clean the pump at least once a month following the instructions below:
- Carefully lift the pump from the base of the fountain.
- Remove the grill, the propeller cover and the propeller.
- You can clean all parts with warm soapy water. Use a cotton bud to remove any dirt. For a more effective cleaning, clean the pump with white vinegar.
- Rinse all components thoroughly.
- Once they are clean and dry, re-assemble the pump components.
Technical features
| Capacity | 2 L |
|---|---|
| Range of the sensor area | Between 2 and 4 meters |
| Material | ABS |
| Adapter | AC 12 V 250 mA |
| Power | 2W |
Safety guidelines
WARNING: when using electrical appliances, basic safety precautions should always be followed, including the following:
- Keep out of reach of children.
- Only use product parts recommended or sold by the manufacturer.
- Do not use outdoors. FOR INDOOR USE ONLY.
- Do not unplug the appliance by pulling on the power cord. To unplug, grasp the plug, not the power cord.
- Do not operate appliance if the cord or the plug are damaged, if the appliance malfunctions, or if the appliance has been dropped or damaged in any manner.
- Always unplug the appliance when not in use, before assembling or disassembling parts, and before cleaning.
- Before connecting the device, check that the voltage mentioned on the device matches your local electric outlet voltage.
- In the event of a pump dysfunction, do not try to repair it yourself.
Warranty
Troubleshooting
Should your product stop working or develop a fault, first read this user’s guide over. Also, make sure that you are using the product correctly.
If the problem persists, contact your retailer or check out our FAQ section at
www.numaxes.com. You can also contact NUM’AXES at
+33.2.38.69.96.27 or by e-mail at
export@numaxes.com.
Depending on the extent of the malfunction, you may have to return your
product for service and repair.
For all repairs, please supply the following:
- the complete product
- the proof of purchase (invoice or sales receipt)
Warranty
NUM’AXES guarantees the products against all manufacturing defects for two
years after purchase. All postage and packing charges will be the purchaser’s
sole responsibility.
Warranty conditions
-
The warranty applies only with a proof of purchase (invoice or sales receipt).
The warranty is exclusive to the original purchaser. -
This warranty does not cover the following:
- direct or indirect problems incurred when sending the product back to the retailer or to NUM’AXES,
- damage to the product caused by:
- negligence or incorrect use (ex: bites, breakage, cracking),
- misuse from not following directions
- repairs performed by unauthorized persons.
- loss or theft.
-
If the product is found to be defective, NUM’AXES will decide to either repair or replace it.
-
No claim may be made against NUM’AXES, particularly in relation to incorrect use or breakdown.
-
NUM’AXES reserves the right to modify the characteristics of its products with a view to making technical improvements or to complying with new regulations.
-
The information contained in this guide may be subject to amendment without prior notice.
-
Photos and drawings are not contractual.
End-of-life product recycling or disposal
The pictogram that appears on your product means that it cannot be disposed of
in household waste. You must either bring the device to a collection point for
treatment, recovery, recycling and elimination of electronic waste, or bring
it back to your retailer.
Safe disposal of electronic waste promotes environment protection, and makes
your input to natural resources conservation and protection of human health.
info@numaxes.com
www.numaxes.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>