iDPRT iT4B Desktop Label Printer User Guide
- June 6, 2024
- iDPRT
Table of Contents
iDPRT iT4B Desktop Label Printer
Caution:
This is a Class A product. In a domestic environment, this product may cause
radio interference in which the user may be required to take adequate
measures.
Packing List
Note: The packing materials are actually based on the order.
Appearance and Components
Front View
Rear View
Inside View
Power Connection
- Connect the AC adapter to power receptacle.
- Connect the power cord to AC adapter.
- Connect the other end of power cord to the outlet.
Loading the Roll
- Press to open the printer cover and mechanism.
- Pull the roll holders open and place the roll between them. Press down the locking tab.
- Pass the labels through label guides and adjust label guides to label’s width.
Loading the Ribbon
- Install the ribbon module.
- Insert the left part of supply spindle and then the right part spindle.
- Press down the printer mechanism.
- Insert the left part of rewind spindle and then the right part.
- Wind the core 2~3 ciPress down the mechanism and close the cover.
- Press down the mechanism and close the cover.
Read User Manual Online (PDF format)
Loading......