iDPRT SP450 Thermal Label Printer User Guide

June 11, 2024
iDPRT

SP450 Thermal Label Printer

iDPRT SP450 Thermal Label Printer - cover User Guide

Caution:
This is a Class A product. In a domestic environment this product may cause radio interference in which the user may be required to take adequate measures.

Packing List

Standard

iDPRT SP450 Thermal Label Printer - Packing List

Note: the packing materials are actually based on the order.

Appearance and Components

Front View

Rear View

Inside View

iDPRT SP450 Thermal Label Printer - Appearance and Components
3 Note: the views above are for your reference. Ports vary by your choice.

Loading the Roll

Folding Paper Loading

  1. Facing the rear of the printer, press the paper guide with both hands at the same time, and adjust it to fit the width of paper.
  2. Insert the paper into the entry slot.iDPRT SP450 Thermal Label Printer - Loading the Roll 2
  3. Slowly feed the paper into the feed channel.iDPRT SP450 Thermal Label Printer - Loading the Roll 3

Note: please ensure the label paper is delivered in place, and a small section of label paer will be automatically delivered from the paper outlet.

Paper Jam Handling

  1. Facing the front of the printer, pull the top cover opening lever forward with both hands at the same time.
  2. Lift the top cover up.
  3. Take out the jammed paper and replace it with new paper.
  4. After the jammed paper is pulled out, normal paper loading can be performed.

Power Connection

  1. Make sure the printer is turned off.
  2. Connect the power adapter to the printer and the power cord.
  3. Plug the other side of the power cord into the socket outlet.

iDPRT SP450 Thermal Label Printer - Power Connection

Note: Please refer to the SP450 User Manual for the tool and driver installation.

Windows Driver Instruction
Driver Preparation for windows
Download Windows Driver application program in CD.
Driver Installation for Windows

Warning:
Recommend to close security software before installation in case of preventing installation.

  1. Select one interface to connect your printer to computer.
  2. Turn on the printer and check if it is connected successfully.
  3. Double click Windows Driver.
  4. Read and agree the license agreement and click “Next”, figure (1).
  5. Select the port name of printer driver and click “Next”, figure (2).iDPRT SP450 Thermal Label Printer - Windows Driver Instruction
  6. Then click “Finish”, figure (3).
  7. After installation, view the icon in “Start” → “Devices and Printers”, figure (4)iDPRT SP450 Thermal Label Printer - Windows Driver Instruction 2

Printing Preferences

  1. Click “Start” → “Devices and Printers”. Right click the icon and choose “Printing preferences”, figure (1).
  2. Click “Paper Name”, choose the paper type as needed, figure (2).

iDPRT SP450 Thermal Label Printer - Prinring
Preferences

Click “Manager” to add a new stock, figure (3)(4).iDPRT SP450 Thermal Label
Printer - Prining Preferences

Choose “Rotate” or “Effect”, it will be showed in the “Preview”,figure (5).iDPRT SP450 Thermal Label Printer - Prining Preferences
2

3. Click “Advanced” to set “Save Paper”, “Density”, “Speed”, “Test”, “Media Handling”, “Media Type”.

iDPRT SP450 Thermal Label Printer - Prining Preferences
3iDPRT SP450 Thermal Label Printer -
Prining Preferences 4iDPRT SP450 Thermal
Label Printer - Prining Preferences 5

4. Click “Watermark” (Recommends BMP format).

5. Click “Halona”.

iDPRT SP450 Thermal Label Printer - Prining Preferences
6

Printer Properties

  1. Click “Start” → “Devices and Printers”. Right click the icon and choose “Printer properties”, figure (A).
  2. Click “General” → “Print Test Page”, and printer will print labels with current sings, figure (B).iDPRT SP450 Thermal Label Printer - Prining Preferences 7
  3. Click “Ports”, then choose the port needed, figure (C).
  4. Click “Advanced” to set the available time for the printer, figure (D).iDPRT SP450 Thermal Label Printer - Prining Preferences 8

Driver Removing
Note: Please turn off the printer or unplug the USB cable before removing the driver.

  1. Double click Windows Driver, figure (E).
  2. Choose “Uninstall printer driver”, then click “Next”, figure (F).
  3. Choose the driver to be uninstalled, then click “Next”, figure (G).iDPRT SP450 Thermal Label Printer - Driver Removing 1
  4. Click “Yes”, figure (H).iDPRT SP450 Thermal Label Printer - Driver Removing 2

Mac Driver Instruction

Driver Preparation for macOS
Download Mac Driver application program in CD.

Driver Installation for macOS
Warning:
Under different operating system, the screen has slight difference.
Please operate it according to the tips. Take SP450 (macOS 10.15) as example.

  1. Double click the Driver and click “Connie”, figure (a).
  2. Select a desman and click “Connie”, figure (b).iDPRT SP450 Thermal Label Printer - Mac Driver Instruction 1
  3. Select “Installation Type” and click “Connie”-> “Install”, figure (c)(d).iDPRT SP450 Thermal Label Printer - Mac Driver Instruction 2
  4. Type in the password of your computer, figure (e).
  5. The installation was successful, figure (f).iDPRT SP450 Thermal Label Printer - Mac Driver Instruction 3
  6. Turn on the printer and connect it to your computer (for example: via USB cable)
  7. Click: Launchpad -> System Preferences -> Printers & Scanners, figure (g).
  8. Under “Printer & Scanner”, printer SP450 is available, figure (h).iDPRT SP450 Thermal Label Printer - Mac Driver Instruction 5
Official Website After Service
http://www.idprt.com/downloads.html https://idprt.afterservice.vip

Xiamen Hanin Electronic Technology Co., Ltd.
Add: No.96, Ron yuan Road, Tongan District, Xiamen, China 361100
Official Website: www.idprt.com
Aer Service Website: https://idprt.afterservice.vip
Customer Service Email 1: idprt@afterservice.vip
Customer Service Email 2: technical@idprt.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals