iDPRT SP460BT Bluetooth Thermal Label Printer User Guide
- May 15, 2024
- iDPRT
Table of Contents
SP460BT
Scan to View the Guide-to-Use Video
Customer Service Email: technical@idprt.com
1. Product List
Printer Power Cord
Power Adapter USB Cable
Quick Start Guide USB Flash Disk
4X6 Shipping Label Paper Type-C Adapter
Before using the product, make sure all parts are present. If any part is missing or damage, please contact our after-sales support team.
2. How to Start
(1) Quick View
- Front View
- Power Button
- Feed Button
- Cover Open Lever
- Rear View
- Status Indicator
- USB Port
- Power Interface
- Inside View
- Printing Bracket Module
- Moveable Label Guides
- Platen
Note: the views above are for your reference. Ports vary by your choice.
(2) Plug in Power Supply
a) Power Adapter
b) Power Cord
- Confirm that the printer power is turned off.
- Connect the power adapter to the printer and the power cord.
- Connect the other end of the power cord to a nearby socket.
- Power on: Press and hold the “power button” for 1 second.
Power off: Long press and hold the “power button” for 3 seconds.
(3) Printer Connection
BT Name: SP460BT_****(The last four digits of the Mac address)
BT Password: 1234
Note: Please refer to the SP460BT User Manual for the utility and driver installation.
Way 1: Connect to PC via USB Cable
Connect the printer to PC via USB cable.
Way 2: Wireless Printer via Bluetooth
For mobile devices
Step1: Download the HereLabel App on your mobile device.
Scan the code to download the HereLabel App.
Step2: Launch the application and click the upper right-hand corner to search for your printer.
BT Name:SP460BT_***( means the last four digits of the MAC address)
Note:
Make sure your printer is turned on.
For Windows PC
Get started with printing by using either the App or your PC (tutorial video of Bluetooth connection for Windows PC: https://www.idprt.com/video/106.html)
Scan the code to watch the guide video of how to connect your Windows PC and printer via Bluetooth.
3. Driver Installation
Make sure your printer is ON, and connected to your computer via USB cable or Bluetooth.
Note:
Under different operating systems, the process of installation has slight
differences. Please operate it according to the tips.
Step1: Visit https://www.idprt.com/driver/
or https://www.idprt.com/downloads/
Step2: Find the driver that matches your device and system.
(ALL PRODUCTS—SP460BT—>ALL TYPE—Driver—>ALL SYSTEM)
Step3: Download the driver and follow the prompts to install it.
For Windows:
For macOS:
4. Load the Labels
(1) Load the Labels
1. Turn the power on, adjust the paper guides to fit the width of paper.
2. Insert the paper into the entry slot. The paper will be inhaled into the path automatically.
(2)Handling Paper Jams
1. Facing the front of the machine, use your right hand to toggle the top cover opening button.
2. Lift up the top cover.
3. After removing the jammed paper from the feed channel, replace it with new paper and discard the wrinkled paper.
- Note: Sharp edge, Caution!
4. Remove the stuck paper and proceed with normal operating paper loading.
5. Setting
For Windows:
Setup SP460BT Printing Preferences:
For macOS:
6. LED Display
Tips: When finishing the driver installation and the LED flashes blue, you can begin your printing journey with the SP460BT Label Printer!
Description
| Color|
Status
---|---|---
The printer is ready|
Blue
|
Always On
The cover is open|
Red
|
Always On
The printer is out of paper|
Red
|
Flash Slowly
Paper jam/Not ready/The paper position is abnormal|
Yellow
|
Flash Slowly
The printer is receiving data|
Green
|
Flash Rapidly
The printer stops printing|
Green
|
Flash Slowly
The temperature of TPH is over high|
Purple
|
Always On
The program is upgrading|
Blue
|
Always On
The printer is printing|
Green
|
Always On
The TPH is not configured|
White
|
Always On
Abnormal Voltage|
Yellow
|
Flash Rapidly
Abnormal SRAM|
Blue
|
Flash Rapidly
FAQ
Q1:What can I do when printing black labels?****
A1:There are two possible reasons.
First, the most common reason is that your labels are loaded upside down.
Please make sure that your labels are properly loaded with the print side up.
Second, you may check if the paper type is correct. Here is a quick way:
Power on the printer, load paper, press and hold feed button until green
indicator light flashes once to release. It will print a self-check page. If
the printed label is blank, we may confirm it is not a thermal label. Please
replace it with a thermal label and try again, and your problem shall be
solved.
Q2:Why is my printing offset?****
A2:You may check whether the paper guides have fixed the label. Pull the paper and pass it through the paper guides, and adjust the guides according to the paper width.
Q3:Why does the printer spit out few blank labels after printing successfully?****
A3:If you’re using shipping labels for printing, please check media type on
driver settings, make sure it is “Labels with Gaps”.
Go to Control Panel->Devices and Printers->Right click on”SP460BT Printer”->
Printer preferences->Advanced setting->Media type->select Labels with Gaps->OK
Q4:What can I do when my printing is unclear and hard to read?****
A4: (1)Please confirm the settings on driver and set “Half-tone” or “Color
Options” to “None”.
(2)If you are printing a PDF file, it is recommended to use Adobe Acrobat
software to open the PDF file to print.
(3)You can set “Darkness” and “Speed”. To print more clearly, it is suggested
to increase the density or darkness, or slow down the printing speed.
Note: Too high density may result in unwanted black lines or labels with high
temperature, this may cause the label to be stuck to the middle of the print
head.
Q5:Why does my printer keep printing sideways?****
A5:The most likely reason is that your label is not properly formatted for 4X6
label printing. SP460BT prints exactly what you see on your printing file in
the same orientation. So if it has a lot of white space around the label, the
printing will be side-ways.
Check if your shipping platform can provide 4X6 labels in the correct
orientation.
Customer Service Email: technical@idprt.com
Scan to View the Guide-to-Use Video
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC ID:2AUTE-4DT23SE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>