iDPRT FRAME102 Smart Wifi Digital Picture Frame User Guide
- June 10, 2024
- iDPRT
Table of Contents
iDPRT FRAME102 Smart Wifi Digital Picture Frame User Guide
PACKAGE LIST
PICTURE FRAME
SUPPORT STAND
ADAPTER
APPEARANCE AND COMPONENTS
FRONT VIEW
REAR VIEW
SIDE VIEW
POSITIONING YOUR FRAME
USE THE STAND TO POSITION YOUR FRAME IN HORIZONTAL OR VERTICAL MODE.
WALL MOUNTING YOUR FRAME
TURN ON
- CONNECT THE POWER ADAPTER TO YOUR FRAME.
- CONNECT THE ADAPTER TO AN OUTLET.
SETTING YOUR FRAME
-
CLICK SETTING
-
CLICK “WIFI” TO CONNECT YOUR FRAME TO WIFI WITH ENTERING WIFI PASSWORD.
-
CLICK MY FRAME TO SET LANGUAGE, DATE, TIME AND SO ON.
-
CLICK “PICTURE” TO SET PHOTO MANAGEMENT. YOU CAN CLICK IMPORT PHOTO TO IMPORT PHOTO FROM SD CARD OR USB DISK.
-
CLICK DESPLAY TO SET BRIGHTNESS. SLEEP MODE AND SO ON.
-
CLICK SLIDE TO STR TIMER. SHOW TEXT. PHOTO DISSPLAY METHOD, VIDEO AUTO-PLAY AND SO ON.
-
CLICK SHARE SCAN THE RIGHT QR CODE
-
CHOOSE DIGITAL FRAM TO CONNECT.
-
CLICK ME THEN YOU CAN SWITCH LANGUAGE.
-
CLICK HOME THEN CLICK ADD DIGITAL FRAME.
-
CLICK LOG IN.
-
CHOOSE PASSWORD.
-
CLICK REGISTER NOW.
-
ENTER THE INFORMATION TO REGISTER AND LOG IN.
-
SCAN THE LEFT QR CODE IN SHARE INTERFACE OF FRAME.
-
YOU CAN SEE THE NAME OF FRAME ON APP, THEN CLICK IT.
-
CLICK + TO IMPORT THE PHOTO YOU LIKE.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Disclaimer
Thank you for purchasing our product! By using this product, you hereby
signify that you have read the Disclaimer and all warnings carefully and that
you understand and agree to abide by the terms and conditions herein. The user
should observe safe and lawful practices including, but not limited to, those
set forth in this document. Our company therefore holds no liability for
damages caused by force majeure, used by a third party, incorrect use, non-
compliance with this user manual or intentional misconduct on the part of the
user.
Except for the scope prohibited by the applicable laws, the company is not
responsible for any incidental, indirect, special or consequential damages,
including but not limited to the loss of profits, income or data due to the
violation of explicit or implied warranties or conditions mentioned in this
user manual.
Information in this user manual is for informational purposes only. It is
subject to change without prior notice, due to the manufacturer s continuous
development program. This document supersedes and replaces all information
supplied prior to the publication hereof.
Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd. Add: No.96,
Rongyuan Road, Tong’an District, Xiamen, China, 361100
Official
Web: www.idprt.com Customer Service
Email 1: idprt@afterservice.vip Customer
Service
Email 2: technical@idprt.com
After Service Web :https://idprt.afterservice.vip