LYNX LN24REFGR Outdoor Refrigerator User Manual

LYNX LN24REFGR Outdoor Refrigerator

Important Safety Instructions

Warnings and safety instructions appearing in this guide are not meant to cover all possible conditions and situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating this appliance.
Recognize Safety Symbols, Words, and Labels.

• WARNING-You can be killed or seriously injured if you do not follow these instructions.
• CAUTION-Hazards or unsafe practices that could result in personal injury or property/product damage.
• NOTE-Important information to help assure a problem-free installation and operation.
• WARNING - This unit contains R600a (Isobutane) which is a flammable hydrocarbon. It is safe for regular use. Do not use sharp objects to expedite defrosting. Do not damage the refrigerant circuit.
• State of California Proposition 65 Warning: This product contains one or more chemicals known to the State of California to cause cancer.
• State of California Proposition 65 Warning: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm..

UNPACKING YOUR APPLIANCE

WARNING
EXCESSIVE WEIGHT HAZARD
Use two or more people to move the product.
Failure to do so can result in personal injury.

Remove Interior Packaging
Your appliance has been packed for shipment with all parts that could be damaged by movement securely fastened. Remove internal packing materials and any tape holding internal components in place. The owner’s manual is shipped inside the product in a plastic bag along with the warranty registration card, and other accessory items.

Important
Keep your carton and packaging until your appliance has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of the damage in transit. Afterward please dispose of all items responsibly.

WARNING – Dispose of plastic bags which can be a suffocation hazard.

Note to Customer
This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the retailer upon acceptance of the shipment. Claims for loss or damage sustained in transit must be made to the retailer.

NOTE DO NOT RETURN DAMAGED MERCHANDISE TO THE MANUFACTURER – FILE THE CLAIM WITH THE RETAILER.

CAUTION
If the appliance was shipped, handled, or stored in other than an upright position for any period of time, allow the appliance to sit upright for a period of at least 24 hours before plugging in. This will assure oil returns to the compressor. Plugging the appliance in immediately may cause damage to internal parts.

Warranty Registration
It is important you send in your warranty registration card immediately after taking delivery of your appliance or you can register online at www.lynxgrills.com/support/registration
The following information will be required when registering your appliance.
Service/Model Number
Serial Number
Date of Purchase
Dealer’s name and address
The service/model number and serial number can be found on the serial plate which is located inside the cabinet on the left side near the top. (See Figure 1).

WARNING
WARNING – Help Prevent Tragedies
Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous – even if they sit out for “just a few hours”.
If you are getting rid of your old refrigerator, please follow the instructions below to help prevent accidents.
Before you throw away your old refrigerator or freezer:

• Take off the doors or remove the drawers.
• Leave the shelves in place so children may not easily climb inside.

INSTALLING YOUR APPLIANCE

Select Location
The proper location will ensure the peak performance of your appliance. We recommend a location where the unit will be out of direct sunlight and away from heat sources. To ensure your product performs to specifications, the recommended installation location temperature range is from 15 to 100°F (10 to 38°C).

Cabinet Clearance
Ventilation is required from the bottom front of the appliance. Keep this area open and clear of any obstructions. Adjacent cabinets and countertops can be installed around the appliance as long as the front grille remains unobstructed.

CAUTION
Front Grille
Do not obstruct the front grille. The openings within the front grille allow air to flow through the condenser heat exchanger. Restrictions to this airflow will result in increased energy usage and loss of cooling capacity. For this reason, it is important this area not be obstructed and the grille openings are kept clean. Lynx Grills does not recommend the use of a custom-made grille as air flow may be restricted. (See Figure 2).

Leveling Legs
Adjustable legs at the front and rear corners of the appliance should be set so the unit is firmly positioned on the floor and level from side to side and front to back. The overall height of your Lynx appliance may be adjusted between the minimum, 333⁄4″ (85.7 cm), by turning the leveling leg in (CW P) and the maximum, 343⁄4″ (88.3 cm) by turning the leveling leg out (CCW Q).

To adjust the leveling legs, place the appliance on a solid surface and protect the floor beneath the legs to avoid scratching the floor. With the assistance of another person, lean the appliance back to access the front leveling legs. Raise or lower the legs to the required dimension by turning the legs. Repeat this process for the rear by tilting the appliance forward using caution. On a level surface check the appliance for levelness and adjust accordingly.
The front grille screws may be loosened and the grille adjusted to the desired height. When adjustment is complete tighten the two front grille screws. (See Figure 5).

INSTALLING YOUR APPLIANCE

WARNING
Electrical Shock Hazard

• Do not use an extension cord with this appliance. They can be hazardous and can degrade product performance.
• This appliance should not, under any circumstances, be installed to an un-grounded electrical supply.
• Do not remove the grounding prong from the power cord. (See Figure 3).
• Do not use an adapter. (See Figure 4).
• Do not splash or spray water from a hose on the appliance. Doing so may cause an electrical shock, which may result in severe injury or death.

Electrical Connection
A grounded 115-volt, a 15-amp dedicated circuit is required.
This product is factory equipped with a power supply cord that has a three- pronged, grounded plug. It must be plugged into a mating grounding-type receptacle in accordance with the National Electrical Code and applicable lo- cal codes and ordinances (see Figure 6). If the circuit does not have a grounding-type receptacle, it is the responsibility and obligation of the customer to provide the proper power supply. The third ground prong should not, under any circumstances, be cut or removed.

NOTE
Ground Fault Circuit Interrupters (GFCI) are prone to nuisance tripping which will cause the appliance to shut down. GFCIs are generally not used on circuits with power equipment that must run unattended for long periods of time, un-less required to meet local building codes and ordinances.

INSTALLING THE ANTI-TIP DEVICE

WARNING

• ALL APPLIANCES CAN TIP RESULTING IN INJURY.
• INSTALL THE ANTI-TIP BRACKET PACKED WITH THE APPLIANCE.
• FOLLOW THE INSTRUCTIONS BELOW

Anti-Tip Device

WARNING
If your refrigerator is not located under a countertop (free standing), you must use an anti-tip device installed as per these instructions. If the refrigerator is removed from its location for any reason, make sure that the device is properly engaged with the anti-tip bracket when you push the refrigerator back into its original location. If the device is not properly engaged, there is a risk of the refrigerator tipping over, with the potential for property damage or personal injury.

NOTE If installed on a concrete floor, concrete fasteners are required, (not included with the anti-tip kit).
CAUTION A ny finished flooring should be protected with appropriate material to avoid damage when moving the unit.

Floor Mount Installation
The anti-tip bracket is to be located on the floor in the left or right rear corner of the refrigerator as shown in Figure 7.

Step-by-Step Instructions
for locating the position of the bracket:

1. Decide where you want to place the refrigerator. Slide it into place, being careful not to damage the floor, leaving 1″ (2.5 cm) of clearance from the rear wall to allow room for the anti-tip bracket.
2. Raise the rear leveling legs approximately 1/4″ (6 mm) to allow engagement with the anti-tip bracket. Level the unit by adjusting all the leveling legs as required. Turning the leveling leg counterclockwise will raise the unit and clockwise will lower the unit.
3. Make sure the refrigerator is in the desired location, then mark on the floor the rear and side corners of the cabinet where the anti-tip bracket will be installed. If the installation does not allow marking the rear corner of the cabinet, then make temporary lines on the floor marking the front corner of the cabinet, excluding the door. Slide the refrigerator out of the way. From the temporary line extend the sidewall line back 211⁄2″ (54.6 cm) as shown in Figure 8.
4. Align the anti-tip bracket to the marks on the floor so the side of the bracket lines up with the side of the cabinet mark, and the “V” notches on the anti-tip bracket line up with the end of the 211⁄2″ (54.6 cm) line (Rear of cabinet line).
5. Fasten the anti-tip bracket to the floor using the supplied screw. (See Figure 8).
6. Slide the cabinet back into position, making sure the rear cabinet leveling leg slides under the anti-tip bracket engaging the slot.

NOTE When the floor-mounted anti-tip bracket is used the mini-mum adjusted height of the cabinet is increased by 3⁄8″ (9 mm).

PRODUCT DIMENSIONS

MODEL

| ROUGH-IN OPENING DIMENSIONS| CABINET DIMENSIONS
---|---|---
“A”| “B”| “C”| “D”| “E”| “F”| “G”| “H”| “J”
LN15REF| 15″

(38.1 cm)

| **34″ to 35″

(86.4 to 88.9 cm)

| *| 147⁄8″ (37.8 cm)| 333⁄4″ to 343⁄4″ (85.7 to 88.3 cm)| 2323⁄32″ (60.2 cm)| 263⁄4″ (67.9 cm)| 3713⁄32″

(95 cm)

| 173⁄4″ (45.1 cm)
LN24REF LN24REFG| 24″

(61 cm)

| **34″ to 35″

(86.4 to 88.9 cm)

| *| 237⁄8″ (60.7 cm)| 333⁄4″ to 343⁄4″ (85.7 to 88.3 cm)| 2323⁄32″ (60.2 cm)| 263⁄4″ (67.9 cm)| 4613⁄32″ (117.9 cm)| 263⁄4″ (67.9 cm)

MODEL

| PRODUCT DATA
---|---
ELECTRICAL REQUIREMENTS #| PRODUCT WEIGHT
LN15REF| 115V/60Hz/15A| 105 lbs

(47.7 kg)

LN24REF LN24REFG| ****

115V/60Hz/15A

| 140 lbs

(63.6 kg)

The depth dimension of the rough-in opening may vary depending on each individual installation. To recess, the entire door “F” dimension plus 1″ (2.5 cm) for the thickness of power cord plug is required.
The minimum rough-in opening required is to be larger than the adjusted height of the cabinet.
A grounded 15 amp dedicated circuit is required. Follow all local building codes when installing electrical and appliance.

WARNING Floor mount Anti-tip Bracket must be installed for freestanding applications. Not required for built-in applications.

USING YOUR ELECTRONIC CONTROL

Control Function Guide

NOTE Temperature displayed reflects the actual temperature inside unit. If the temperature displayed is different from than the selected, the unit is progressing toward the selected temperature. Time to reach set point varies based on ambient temperature, the temperature of the product loaded, door openings, etc. Lynx Grills recommends allowing the unit to reach set points before loading.

SHELVING CONFIGURATIONS

Loading Tips and Suggestions
Your appliance is equipped with a cantilever shelf system which provides maximum adjustability and customizing of the shelving arrangements listed below.

15″ (38.1 cm) Wide Model: with a solid door. Figure 14.
(2) perforated stainless steel slide-out shelves. (See Figure 15).
(1) 3-bottle wine shelf (see Figure 16).

Refrigerator:
24″ (61 cm) Wide Models:
With a solid or glass door. Figure 17. (2) perforated metal
cantilever shelves. (See Figure 18).

SHELVING CONFIGURATIONS

CAUTION Never try to move a loaded shelf, remove everything from the shelf before moving. Use both hands when moving the shelf.

To Add or Remove a Shelf
Remove the stored products from the shelf. Do not try to remove a loaded shelf from the appliance. Grasp the shelf front with both hands, rotate the front upward and lift out. (See Figure 19). To install a shelf insert the shelf in the appliance and insert the top hooks into the shelf support slots and drop the shelf down so the hooks drop over the bottom of the slots.

CARE AND CLEANING

Front Grille
Be sure that nothing obstructs the required airflow openings in front of the cabinet. At least once or twice a year, brush or vacuum lint and dirt from the front grille area (see page 4).

CAUTION|
SHOCK HAZARD: Disconnect electrical power from the appliance before cleaning with soap and water.

Cabinet
The stainless steel cabinet can be washed with either mild soap and water and thoroughly rinsed with clear water. See “Stainless Steel Maintenance” on page 15.

Interior
Wash the interior compartment with mild soap and water. Do NOT use an abrasive cleaner, solvent, polish cleaner or undiluted detergent.

Care of Appliance

1. Avoid leaning on the door, you may bend the door hinges or tip the appliance.
2. Exercise caution when sweeping, vacuuming or mop-ping near the front of the appliance. Damage to the grille can occur.
3. Periodically clean the interior of the appliance as needed.

In the Event of a Power Failure
If a power failure occurs, try to correct it as soon as possible. Minimize the number of door openings while the power is off so as not to adversely affect the appliance’s temperature.

Light Assembly Replacement
All models use LED lamps to illuminate the interior of the appliance. This component is very reliable, but should one fail, contact a qualified service technician for replacement of the LED.

WARNING Electrocution Hazard

• Never attempt to repair or perform maintenance on the appliance until the main electrical power has been disconnected. Turning the appliance control “OFF” does not remove electrical power from the unit’s wiring.
• Replace all parts and panels before operating.

CARE AND CLEANING

Long-Term Storage/Winterization

1. Time to Winterize, when the daily low ambient temperature is at or below 38°F (3.3°C).
   CAUTION Operation of the unit at ambient temperatures below the recommended Winterization temperature will void your warranty. ****

2. Turn unit off, (see page 10)

3. Remove all contents.

4. If necessary, move the unit so you can gain access to the rear of the product.

5. Unplug the unit from the power outlet.

6. It is also recommended that the power to the outlet be turned-off if the circuit is not required for other items during the Winter season.

7. When cleaning the unit pay particular attention to any cracks and crevices that may have accumulated dirt and debris.

8. Remove the front toe-grille, (see Figure 20), and use a brush and vacuum to clean dirt and debris from beneath the unit.

9. Thoroughly clean the toe grille and re-install on the unit. (See Figure 20).

10. Remove the rear access cover, (see Figure 21), and use a brush and vacuum to clean dirt and debris from the machine compartment.
    • If the plastic defrost drain pan located under the compressor contains water, use a sponge to remove as much water as possible.

11. Thoroughly clean the rear access cover and re-install on the unit.

12. Wipe down all interior surfaces with the anti-bacterial cleaner to be followed by clean rinse water to remove any residual chemicals which could cause staining. Do not use any abrasive cleaners or scouring pads.

13. Leave the door open and allow to completely dry out before closing the door.

14. Thoroughly clean the door gasket with the anti-bacterial cleaner to be followed with clean rinse water to remove any residual chemicals.

15. Thoroughly clean the exterior with a cleaner approved for stainless steel. Do not use any abrasive cleaners or scouring pads. See “Stainless Steel Maintenance” on page 15.

16. Any mounting hardware/fasteners that are showing signs of corrosion should be replaced.

17. Once the exterior has been thoroughly cleaned, you may want to apply a coating of car wax to help protect against spotting from moisture, dirt, and debris that may accumulate on the surfaces during the Winterization period.

18. Do not place a cover on the unit, as this can trap condensation.
    After completion of the above, you may choose to store the unit indoors, although this is not required.

Start-up after Long Term Storage

1. If stored outside, it is recommended that the unit again be thoroughly inspected per the storage instructions above to address any dirt or debris from the weather and/or animals/insects.
2. Connect the unit to electrical power.
3. Turn unit on and confirm your desired control settings.
4. Allow 24-hrs for the unit to stabilize before loading contents.

STAINLESS STEEL MAINTENANCE

Background
Stainless steel does not stain, corrode, or rust as easily as ordinary steel, but it is not stained or corrosion-proof. Stainless steels can discolor or corrode if not maintained prop-erly.
Stainless steels differ from ordinary carbon steels by the amount of chromium present. It is this chromium that provides an invisible protective film on the surface called chrome-oxide. This protective chrome-oxide film on the surface can be damaged or contaminated, which may result in discoloration, staining, or corrosion of the base metal.

Care and Cleaning
Routine cleaning of the stainless steel surfaces will serve to greatly extend the life of your product by removing contaminants. This is especially important in coastal areas which can expose the stainless to severe contaminants such as halide salts, (sodium chloride).
It is strongly recommended to periodically inspect and thoroughly clean crevices, weld points, under gaskets, rivets, bolt heads, and any locations where small amounts of liquid could collect, become stagnant, and concentrate contaminates. Additionally, any mounting hardware that is showing signs of corrosion should be replaced.
The frequency of cleaning will depend upon the installation location, environment, and usage conditions.

Choosing a Cleaning Product
The choice of a proper cleaning product is ultimately that of the consumer, and there are many products from which to choose. Depending upon the type of cleaning and the degree of contamination, some products are better than others.
Typically the most effective and efficient means for routine cleaning of most stainless steel products is to give the surfaces a brisk rubbing with a soft cloth soaked in warm water and a gentle detergent, or mild mixture of ammonia. Rub-bing should, to the extent possible, follow the polish lines of the steel, and always insure thorough rinsing after cleaning.
Although some products are called “stainless steel clean-ers,” some may contain abrasives that could scratch the surface, (compromising the protective chrome-oxide film), and some many contain chlorine bleach which will dull, tarnish or discolor the surface if not completely removed. After the stainless surfaces have been thoroughly cleaned, a good quality car wax may be applied to help maintain the finish.

NOTE
Stainless steel products should never be installed, or stored in close proximity to chlorine chemicals.
Whichever cleaning product you chose, it should be used in strict accordance with the instructions of the cleaner manufacturer.

ENERGY SAVING TIPS AND OBTAINING SERVICE

Energy Saving Tips
The following suggestions will minimize the cost of operating your refrigeration appliance.

1. Do not install your appliance next to a hot appliance (cooker, dishwasher, etc.), heating air duct, or other heat sources.
2. Install product out of direct sunlight.
3. Ensure the front grille vents at front of the appliance be-neath door are not obstructed and kept clean to allow ventilation for the refrigeration system to expel heat.
4. Plug your appliance into a dedicated power circuit. (Not shared with other appliances).
5. When initially loading your new product, or whenever large quantities of warm contents are placed within the refrigerated storage compartment, minimize door openings for the next 12 hours to allow contents to pull down to the compartment’s set temperature.
6. Maintaining a relatively full storage compartment will require less appliance run time than an empty compartment.
7. Ensure door closing is not obstructed by contents stored in your appliance.
8. Allow hot items to reach room temperature before placing in the product.
9. Minimize door openings and duration of door openings.
10. Use the warmest temperature control set temperature that meets your personal preference and provides the proper storage for your stored contents.
11. When on vacation or away from home for extended periods, set the appliance to the warmest acceptable temperature for the stored contents.
12. Set the control to the “off” position if cleaning the appliance requires the door to be open for an extended period of time.

If Service is Required:

• If the product is within the first-year warranty period please contact your dealer or call Lynx Grills Customer Service at 888.289.5969 for directions on how to obtain warranty coverage in your area.
• If the product is outside the two-year warranty period, Lynx Grills Customer Service can provide recommendations of service centers in your area.
• In all correspondence regarding service, be sure to give the service/model number, serial number, and proof of purchase.
• Try to have information or description of the nature of the problem, how long the appliance has been running, the room temperature, and any additional information that may be helpful in quickly solving the problem.
• Table “A” is provided for recording pertinent information regarding your product for future reference.

For Your Records

Date of Purchase|
Dealer’s name|
Dealer’s Address|
Dealer’s City|
Dealer’s State|
Dealer’s Zip Code|
Appliance Serial Number|
Appliance Service/Model Number|
Date Warranty Card Sent (Must be within 10 days of purchase).|

TROUBLESHOOTING

Before You Call for Service
If the appliance appears to be malfunctioning, read through this manual first. If the problem persists, check the troubleshooting guide below. Locate the problem in the guide and refer to the cause and its remedy before calling for service. The problem may be something very simple that can be solved without a service call. However, it may be required to contact your dealer or a qualified service technician.

WARNING Electrocution Hazard

• Never attempt to repair or perform maintenance on the appliance until the main electrical power has been disconnected. Turning the appliance control “OFF” does not remove electrical power from the unit’s wiring.
• Replace all parts and panels before operating.

CAUTION
In the unlikely event you lose cooling in your unit, do not unplug the product from the electric supply, but do call a qualified service technician immediately. It is possible that the loss of cooling capacity is a result of excessive frost build-up on the evaporator cooling coil. In this case, removing power to the unit will result in the melting of this excessive quantity of ice, which could generate meltwater that exceeds the capacity of the defrost drain system and could result in water damage to your home. The end-user will be ultimately responsible for any water damage caused by prematurely turning the unit off without appropriately managing the excess water run-off.

The appliance is not cold enough

(See “Adjusting the temperature” on page 10)

| •       Control set too warm

•       Content temperature not stabilized.

| •          Adjust temperature to colder. Allow 24 hours for the temperature to stabilize.
•       Excessive usage or prolonged

door openings.

| •       Allow the temperature to stabilize for

at least 24 hours.

•       Airflow to front grille blocked.| •       Airflow must not be obstructed to the front grille. See “clearances” on page 4.
•          Door gasket not sealing properly.| •       Replace the door gasket.
Appliance too cold

(See “Adjusting the Temperature” on

page 10)

| •       Control set too cold| •         Adjust temperature warmer. Allow 24 hours for the temperature to stabilize.
•          Door gasket not sealing properly.| •       Replace the door gasket.
No interior light.| •       Failed LED light assembly or light switch.| • Contact a qualified service technician.
Light will not go out when door is closed| •          Display light is turned on. (Glass door models only.| •                    Turn off the display light, and shut the door.
•       Door not activating light switch.| •       Appliance not level, level apply-

ance, (See page 4, “leveling legs”)

•       Failed light switch| •       Contact a qualified service techni-

cian.

Noise or Vibration| •       Appliance not level| •       Level appliance, see “Leveling

Legs” on page 4.

•       Fan hitting tube obstruction.| •       Contact a qualified service techni-

cian.

The appliance will not run.| •          Appliance turned off| •          Turn the appliance on. See “Starting

your appliance” on page 10.

•       Power cord not plugged in.| •       Plug in the power cord.
•       No power at the outlet.| •       Check house circuit.
CARE AND USE/INSTALLATION| 17

HOUSEHOLD PRODUCT WARRANTY

UNDERCOUNTER REFRIGERATOR / BEVERAGE CENTER WARRANTY
TWO-YEAR FULL WARRANTY
Undercounter refrigerators / Beverage Centers and all of their component parts, except as detailed below*†, are warranted to be free from defective materials or workmanship in normal residential use for a period of two (2) years from the date of original retail purchase. Lynx, the warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period.

*FULL NINETY (90) DAY COSMETIC WARRANTY:
Product is warranted to be free from cosmetic defects in materials or workmanship (such as scratches on stainless steel, paint/porcelain blemishes, etc.) for a period of ninety (90) days from the date of original retail purchase or closing date for new construction, whichever period is longer. Any defects must be reported to the selling dealer within ninety (90) days from date of original retail purchase. Lynx uses high-quality processes and materials available to produce all color finishes. However, slight color variation may be noticed because of the inherent differences in painted parts and porcelain parts as well as differences in kitchen lighting, product locations, and other factors. Therefore, this warranty does not apply to color variation attributable to such factors.

FULL NINETY (90) DAY WARRANTY IN “RESIDENTIAL PLUS” APPLICATIONS: Lynx products are designed and certified for residential use only. They are not intended for use in commercial applications. Lynx products should only be used in accordance to national and local codes. Lynx is not responsible for property damage or injury resulting from use in a commercial application. To support the manufacturing quality of its appliance Lynx will provide a full 90-day warranty for products used in “Residential Plus “applications. This “Residential Plus” warranty applies to applications where use of the product extends beyond residential use but is in compliance with national and local codes.

In some jurisdictions, these applications are zoned as residential. Examples of, but not limited to, such applications covered by this warranty are bed and breakfasts, fire stations, private clubs, churches, condominium/apartment common areas etc. Under this “Residential Plus” warranty, the product, its components and accessories are warranted to be free from defective material or workmanship for a period of ninety (90) days from the date of original retail purchase. Lynx warranter, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period. This warranty covers parts and labor. This warranty excludes use of the product in all commercial locations such as restaurants, food service locations and institutional food service locations.

SIX YEAR FULL WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED
Any sealed refrigeration system component, as listed below, is warranted to be free from defective materials or workmanship in normal household use during the third through the sixth year from the date of the original retail purchase. Lynx, the warranter, agrees to repair or replace, at its option, any part which fails or is found to be
defective during the warranty period.
Sealed Refrigeration System Components: Compressor, Evaporator, Condenser, Connecting Tubing, Dryer/Strainer

TWELVE-YEAR LIMITED WARRANTY ON SEALED REFRIGERATION PARTS AS LISTED
Any sealed refrigeration system component, as listed above, which fails due to defective materials or workmanship in normal household use during the seventh through the twelfth year from the date of original retail purchase will be repaired or replaced, free of charge for the part itself, with the owner paying all other costs, including labor.

WARRANTY TERMS
This warranty extends to the original retail purchaser of the product warranted hereunder and to each transferee owner of the product during the term of the original purchaser’s warranty. the warranty is transferable by the original retail purchaser via home sale only. If a transferee owner is unable to provide proof of purchase from the original purchaser and the product has not been previously registered, the production date of the product, located in the serial number of the product, will serve as the effective warranty start date.

The activation date of the warranty begins from the date of the original retail purchase. In the case of new product purchase via building development sales, activation begins from the earlier date of either certificate of occupancy or 24 months from the date of manufacture. Note date of manufacture is identified by the serial tag on the product.
This warranty does not cover units purchased as b-stock, liquidation, salvage, seconds, refurbished, as-is, or used products.
This warranty shall apply to products purchased in the United States and Canada. Products must be purchased in the country where the service is requested. Warranty service must be performed by a Lynx-authorized service agency or representative. Warranty shall not apply to damage resulting from abuse, accident, natural disaster, loss of electrical power to the product for any reason, alteration, improper installation, improper operation, or repair service of the product by anyone other than a Lynx authorized service agency or representative.

This warranty does not apply to commercial usage. Warrantor is not responsible for consequential or incidental damage whether arising out of breach of warranty, breach of contract or otherwise. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations do not apply to you.
The owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of purchase upon request, and making the product reasonably accessible for service. If the product or one of its component parts contains a defect or malfunction during the warranty period, after a reasonable number of attempts by the warrantor to remedy the defects or malfunctions, the owner is entitled to either a refund or replacement, at the warrantor’s discretion of the product or its component part or parts. The Warrantor’s liability on any claim of any kind, with respect to the goods or services covered hereunder, shall in no case exceed the price of the goods or service or part thereof which gives rise to the claim.

WARRANTY SERVICE
Under the terms of this warranty, service must be performed by a Lynx- authorized service agent or representative. Service will be provided during normal business hours Labor performed at overtime or premium rates shall not be covered by the warranty. To obtain warranty service contact Lynx Customer Care at
1-888-289-5969. Please have a model number, serial number, and date of original purchase available when calling. IMPORTANT: Retain proof of original purchase to establish warranty period. The return of the owner’s registration card is not a condition of warranty coverage. You should, however, return the owner registration card
so Lynx can contact you should any question of safety arise which could affect you.

Any implied warranties of merchantability and fitness applicable to the above- described burner assemblies, infrared rotisserie burners, grill grates, and stainless steel parts are limited in duration to the period of coverage of the applicable express written limited warranties set forth above. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which may vary from jurisdiction to jurisdiction. Specifications are subject to change without notice.

The best outdoor kitchen products come from Lynx Grills
62201 Highway 82 West Greenwood, MS 38930 Service: (888)-289-5969 www.lynxgrills.com 

References

• Lynx Grills - The Finest Outdoor Kitchens & Grills
• Support & Resources

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>