yinstron T11 Remote Control User Manual
- May 15, 2024
- yinstron
Table of Contents
yinstron T11 Remote Control
Product Information
Specifications:
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
yinstron T11 Remote Control
It is important to note that any changes or modifications to this device not
explicitly approved by the manufacturer could void your authority to operate
the equipment. This device complies with part 15 of the FCC Rules, and its
operation is subject to specific conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits for an
uncontrolled environment. To ensure safe operation, it should be installed and
operated with a minimum distance of 0cm between the radiator and your body.
Frequently Asked Questions
Q: Can I modify the device?
A: Any changes or modifications not approved by the manufacturer may void
your authority to operate the equipment. It is recommended to use the device
as intended without modifications.
Q: What distance should be maintained between the radiator and the body?
A: The equipment should be installed and operated with a minimum distance of
0cm between the radiator and your body to comply with FCC radiation exposure
limits.
Instructions
- Bluetooth name: LAIGI
- Bluetooth version: 4.2
- Lithium battery: Rechargeable 60mAh
Using
- Pull the power switch, and the indicator light flashes
- Open the mobile phone Bluetooth and search for the device name: LAIGI
- Click the pairing is successful, the indicator light will no longer flash
- Open the phone camera and press to take a photo
- Open the mobile phone video and press to start, and then press to end
lphone needs to do the following settings
-
Lock screen rotation function
-
Settings -Accessibility- Touch -Assistive Touch (on)
-
Settings -Accessibility – Touch -Assist – Tracking Sensitivity
(The Tracking Sensitivity function can be found in the drop-down of the assistive Touch menu content)
Move the white point towards the turtle (best between 1/4 and 1/3 of the progress bar) -
Open the video software to take pictures/videos.
-
If pressing cannot take a photo/video, the small white floating point on the screen isn’t aligned with the shutter. Press and hold , click to adjust up, down, left, and right to make the floating point overlap with the shutter, then you can take photos/videos
How to open a tripod
Open it in the position of the handle and it will become tripod mode.
How to clamp the mobile phone
Open an pull up the anti-skid chuck to clamp the mobile phone
- Parts name: Fill Light
- Lamp bead model: 2835, warm white/white
- Battery: rechargeable lithium battery
- Interface voltage: 5V/ 0.2A
- Battery capacity: 60/ 200 mAh (Need to buy separately)
Instructions for use:
- Insert the fill light into the holes at both ends of the clip
- Click the switch to turn on /off the light
- Click the switch to switch the light color and brightness
- The built-in lithium battery can be recharged
FCC
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>