Shenzhen Feelstorm Technology BM918 Video Baby Monitor User Manual

Shenzhen Feelstorm Technology BM918 Video Baby Monitor

WELCOME to …
your new Digital Baby Monitor!
Thank you for purchasing this product. Now you can see and hear your baby sleeping in the bedroom or monitor your children playing in the playroom . This User’s Guide provides most of the information you need to know to use We recommend you charge the parent unit before using it, so that it will continue to work if you disconnect it from the charger or carry it to another location. Please read the Safety Instructions before installing the product.
Got everything?

• 1 x Parent Unit (Monitor)
• 1 x Baby Unit (Camera)
• 2 x Power Adapters

Overview Of Your Baby Monitor

Parent unit:

1. Lcd display
2. Microphone
3. Power/Signal indicating led
4. Volume +key/ Up key
5. PTT key
6. Music play control key
7. Backlight – key/ Left key
8. Menu / OK key
9. Backlight +key/ Right key 1 O.Pan&Tilt function activated
10. Power key/ Return key
11. Volume – key/ Down key
12. Speaker
13. Power adapter connector

Baby Unit:

1. Temperature sensor
2. Pair key
3. Microphone
4. Speaker
5. Power adapter connector
6. Light sensor
7. Camera lens
8. infrared LEDs
9. Power LED

Safety Instructions

WARNING
This baby monitor complies with all relevant standards regarding electromagnetic fields and can be used safely when operating in accordance with the instructions in the user guide. Therefore, please read the instructions in this user guide carefully before using the device.

• An adult is required to install. Keep small parts away from the children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
• Keep the cords out of the reach of children.
• Do not use the baby monitor near water or a heat source.
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

Getting Started

Baby unit (Camera) power supply

1. Connect the small plug of the power adapter to the baby unit and the other end to the main socket.
2. A blue light led will display indicate the baby unit is working

Parent unit (Monitor) power supply

Charging the parent unit fully before use is recommended.This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket
2. The power indicating LED will illuminate, which means the battery start charging.
3. Press the power key and hold the key for at least 3 seconds to turn on the parent unit.

NOTE: Use only the power adapters included in the package.

Using The Baby Monitor

Setting up
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

Note:
Do not place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment

Pairing camera
The baby unit has already been paired. You do not need to register them again unless the baby unit loses connection with the parent unit. Learn section ‘5.2 Camera Registration’ for more details.

Night vision

The baby unit has 6 high-intensity infrared LEDs for picking up clear images in the dark.

Music player

Press the Music Player key to turn on the music player and play a lullaby on the baby unit; press the Music Player key again to turn it off.

Voice function

Press and hold the PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.

Adjusting the volume

When the video is playing mode, press the volume key to adjust the volume. The display will show the current volume for 3 seconds.

VOX function

In VOX mode, the screen will go into sleep automatically to save power. It will reactivate automatically when it detects any sound in the baby’s room. Press VOX Key again to turn to Normal mode.

Pan and tilt

In the monitoring interface,press the pan&tilt function key to activate the motor mode, then press up/ down/ left/ right key to remotely pan or tilt the camera. Press the pan&tilt function key again or no operation for long time will exit the motor mode.

Monitoring Screen Icons

1. Signal strength indicator
2. Temperature of the baby’s room
3. Lullaby is playing
4. Alarm activated
5. VOX function activated
6. Motor mode activated
7. Battery indicator
8. PTT function activated
9. Date and time (HH:MM AM/PM DD/MM)
10. Volume Level Bar
11. Backlight Brightness Bar

Menu Options

Main menu
Press “OK/Menu” Key at monitoring interface to enter the main menu. It contains 6 items:

You can press the “Up/Dawn” key or “Left/Right” key to move the cursor to select an item and press the “Menu/OK” key will enter the sub-menu which you selected. Press the’ Return’ key to return to the monitoring interface.

Camera registration (pairing}

Press “Menu / OK” key to enter registering screen, then click the pair key on the back of baby unit within 1 o Secs to complete the registration.

Alarm

Press “Menu / OK” key to enter edit mode key to skip to the next item and “Left/ Right” key to change value.

Settings

Time and date

There are 2 items in this menu: Press the “Menu/ OK” key to choose the item, “Up/Down• key to skip to the next item and the “Left I Right” key to change value.

Temperature unit
Switch the unit to Celsius or Fahrenheit.
Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker.
Camera power indicator
The power LED light of the baby unit can be turned on or off through the parent unit.

LCD backlight
You are be able to adjust the brightness of screen and the active time of the LCD backlight at the menu interface.

System mode

This menu allows you to choose the working mode from the following: Normal mode/ VOX mode.
VOX sensitivity
Change the VOX sensitivity to: Low/ Medium / High.
Language
The language setting menu allows you to choose your language from the following English/ Franais /Espanol/ Portugues / Italiano I Deutsch I T0rke I PyccK

System info
It contains system information such as hardware version, software version etc.

TECHNICAL FEATURES

• Frequency: 2.4 GHz Digital

• Modulation Mode: GFSK

• Operating Temperature: -1 Oto +45°C

• Operating Humidity: <85%

• Range: 260m in open field
  (The walls, windows, doors and stairs will weaken the signal.)
  Monitor

• LCD: 3.2″ TFT LCD

• Resolution: 320X240

• Battery: Li-Polymer 11 S0mAh

• Dimensions {W x H x D): 72 X 124.5 X 17.5 mm
  Camera

• Sensor: CMOS

• Minimum Illumination: 0Lux ( IR on)

• Night Vision Distance: 15ft ( Sm)

• Light sensor

• Temperature Sensor (Tolerance ±2 Celsius)

• Dimensions (W x H x D): 72.5 Xl 16 X 66.2 mm

FCC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>