hansgrohe 71012000, 71112XXX MyCube XL, MySport XL Instruction Manual

hansgrohe 71012000, 71112XXX MyCube XL, MySport XL

Product Information

The product is a MyCube XL 71012000 and MySport XL 71112XXX. It is available in different colors, including Chrome Plated (000) and Matt Black (670). The product is designed for bathing, hygienic, and body cleaning purposes. It operates at a maximum pressure of 1 MPa and has a recommended operating pressure range of 0.1 – 0.5 MPa. The test pressure is 1.6 MPa. The product is designed for use with drinking water and should not be used for any other purposes.

Product Usage Instructions

1. Ensure that you wear protective gloves during installation to prevent crushing and cutting injuries.
2. Connect the hot and cold water supplies, ensuring that they have equal pressures.
3. Adjust the hot water limiter, if necessary, to control the hot water temperature. Note that using a hot water limiter in combination with a continuous-flow water heater is not recommended.
4. Refer to the flow diagram provided on page 35 for a visual representation of the product’s water flow.
5. Clean the product regularly as described on page 36.
6. Operate the product following the instructions provided on page 34.
7. If any spare parts are needed, refer to the spare parts list on page 37.
8. During thermal disinfection, it is recommended not to use the first half liter of water drawn in the morning or after a prolonged period of non-use.
9. For assembly instructions, refer to page 32.

Instructions for use

SETTING

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The product may only be used for bathing, hygienic, and body cleaning purposes.
• The hot and cold supplies must be of equal pressure.

HOW TO FIXED

DIMINSSION

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honored.
•  The pipes and the fixture must be installed, flushed, and tested as per the applicable standards.
• The plumbing codes applicable in the respective countries must be observed.
• If the instantaneous water heater causes problems or
• if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.

Technical Data

• This mixer series-produced with EcoSmart® (flow limiter)
• Operating pressure: max. 1 MPa
• Recommended operating pressure: 0,1 – 0,5 MPa
• Test pressure: 1,6 MPa
• (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 60°C
• Thermal disinfection: 70°C / 4 min
• The product is exclusively designed for drinking water!

Symbol Description

Do not use silicone-containing acetic acid!

Adjustment (see page 33)
Adjust the hot water limiter. Using a hot water limiter in combination with a continuous-flow water heater is not recommended.

• Dimensions (see page 35)
• Flow diagram (see page 35)
• Spare parts (see page 37)
• XXX = Colors
• 000 = Chrome Plated
• 670 = Matt Black
• Cleaning (see page 36)
• Operation (see page 34)

Hansgrohe recommends not to use drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.

Test certificate (see page 40)

Cleaning recommendation / Warranty / Contact

Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax 49 (0) 7836/511440 E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>