Shenzhen Feelstorm Technology BM919 Video Baby Monitor User Manual

Shenzhen Feelstorm Technology BM919 Video Baby Monitor

WELCOME to.. your new Digital Baby Monitor!

Thank you for purchasing this product. Now you can see and hear your baby sleeping in the bed room or monitor your children playing in playroom. This User’s Guide provides most of the information you need to know to use this product. We recommend you charge the parent unit before using it, so that it will continue to work if you disconnect it from the charger or carry it to another location. Please read the Safety Instructions before installing the product.

Got everything?

• 1x Parent Unit
• 1 x Baby Unit
• 2 x Power adapter

Overview of your Parent monitor

Parent unit

1. Lcd display
2. Menu key
3.  Volume +key/ Up key
4.  Volume – key/ Down key
5.  Speaker
6.  PTT key
7. Microphone
8. Music play control key
9. Power key/ Return key
10. Signal indicating led
11. Power indicating led
12. Power adapter connector

Overview of your Baby unit

1. Light Sensor
2.  Camera Lens
3.  Power LED
4.  Microphone
5.  lnfrared LEDS
6.  Pair key
7. Temperature Sensor
8. Speaker
9. Power adapter connector

Safety Instructions

WARNING:
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.
An adult is required to install. Keep small parts away from the children when assembling.

• An adult is required to install. Keep small parts away from the children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
• Keep the cords out of the reach of children.
• Do not use the baby monitor near water or a heat source.
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

GETTING STARTED

Baby unit power supply

1. Plug the small port of the power adapter into the baby unit and the other end into an electrical outlet. Note: use only the power adapter provided.
2. A blue indicator will light up when the baby unit is running. (except in Night Vision mode)

Parent unit power supply

Charging the parent unit fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket Note: use only the power adapter provided.
2.  The power indicating LED will illuminate, which means the battery start charging.
3.  Press and hold power key at least 3 seconds to turn on the parent unit.

Using the Baby Monitor

Setting up
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby nit until you are satisfied with the image in the parent unit.
NOTE
Do not place the baby unit within the reach of baby! If there is any interference in the image or sound, try moving the units to different locations, and ensure they are not too close to other electrical equipment.

Pairing camera
The baby unit has already been paired. You do not need to register them again unless the baby unit loses connection with the parent unit. Learn section ‘5.2 Camera Registration’ for more details.

Night vision
The baby unit has 6 high-intensity infrared LEDs for picking up clear images in the dark.

Music player
Click the Music Player key to turn on the music player and play a lullaby on the baby unit; press the Music Player key again to turn it off.

Voice function
Press and hold PTT key on the parent unit to speak to your baby through the baby unit’s speaker. A microphone icon will appear at the bottom of the screen. 3.6 Adjusting the volume When the video is playing, press “down” key to decrease volume or “up” key to increase volume. The display will show the current volume for 3 seconds.

Monitoring Screen Icons

1. Signal strength indicator
2.  Temperature of the baby’s room
3.  Lullaby is playing
4.  Alarm activated
5.  Battery indicator
6.  PTT function activated
7.  Date and time(DD/MM HH:MM AM/PM}

Menu option

1. Main menu
   Press ‘OK/Menu’ Key at monitoring interface to enter the main menu. It contains 4 items
   You can press the up key or down key to move the cursor to select an item and press menu key will enter the sub-menu which you selected.Press return key will back to monitoring screen.

2. Camera Registration (pairing)
   Press menu key to entry registering screen, then push the pair key on the back of baby unit within 10 seconds.
   

3. Alarm
   Press down/up key to move the cursor and press menu key choose item.In edit mode, press PTT key to move the cursor and press Down/Up key to change value.

4. Settings
   

   • Language
     Language setting menu allows you to choose your language from the following : English/ Franais /Espanol/ Portugues /Italiano/ Deutsch/ TOrke / PyccK’1iii 5.4.2 Time and date
     There are contains 2 items in this menu
     Press down key to choose item, PTT key to move the cursor and up key to change value .

   • Temperature unit
     Change the unit to Celsius or Fahrenheit

   • Anti-flicker
     You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker

   • System mode
     This menu allows you to choose the working mode from the following: Normal mode / VOX mode

   • VOX Sensitivity
     Change the VOX sensitivity to: Low/ Medium/ High.

   • LCD backlight
     You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.

5. System info
   There are contains system information such as software version I hardware version, build date etc.

TECHNICAL FEATURES

• Frequency: 2.4 GHz Digital
• Modulation Mode: GFSK
• Operating temperature: -1 Oto +45°C
• Operating Humidity: <85%
• Range: 260m in open field

Monitor

• LCD: 2.0″ LCD
• Resolution: 776 x 220 pixel
• Battery: Li-Polymer 750mAh
• Dimensions (W x H x D): 67.6 Xl 26 X 24 mm

Camera

• Sensor: CMOS
• Minimum Illumination: 0Lux ( IR on)
• Night Vision Distance: 15ft ( Sm)
• Lighting sensor
• Temperature sensor
• Dimensions (W x H x D): 62 X 110 X 60 mm

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SAR Information Statement

Your Video Baby Monitor is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this Video Baby Monitor when tested for Body-worn is is 0.07 W/Kg (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on
FCC ID: 2AFX2BM919-1 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at
http://www.wow-com.com. • In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
The SAR test distance is 0mm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>