Shenzhen Feelstorm Technology BM910 Video Baby Monitor User Manual

Shenzhen Feelstorm Technology BM910 Video Baby Monitor

OVERVIEW OF YOUR PARENT UNIT

1. LCD display
2. Volume +/ up / VOX ON/OFF key
3. Volume – / down I PTT key
4. Menu key/ OK/ Music play ON/OFF key
5. Power key/ Return key/ Time display key
6. Wireless power connector
7. Speaker
8. Microphone

OVERVIEW OF YOUR BABY UNIT

1. Light sensor
2. Camera lens
3. Power indicating LED
4. lnfrared LED
5. Speaker
6. Pair key
7. Microphone
8. Power adapter connector
9. Temperature sensor

OVERVIEW OF THE CHARGING STAND

1. Wireless charging connector for the parent unit
2. Power adapter connector

CAMERA’S DIRECTION ADJUSTABLE

SAFETY INSTRUCTIONS

WARNING:
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before suing the device.

1. Adult assembly is required. Keep small parts away from the children when assembling.
2. This product is not a toy. Do not allow children to play with it.
3. This baby monitor is not a substitute for responsible adult supervision.
4. Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
5. Keep the cords out of reach of children.
6. Do not use the baby monitor near water or a heat source.
7. .Only use the power adapters provided.
8. Do not touch the plug contacts with sharp or metal objects.

GETTING STARTED

BABY UNIT POWER SUPPLY
Connect the small plug of the power adapter to the baby unit and the other end to the mains socket.
NOTE: Only use the power adapter provided 2.A blue light led will display indicates the baby unit is working.

PARENT UNIT POWER SUPPLY

Charging the parent unit fully before use is recommended. This will allow the unit to operate battery in the event of a power failure.

1. Connect the plug of the power adapter to the charging stand

2. Simply place your parent unit to the wireless charging connector
   NOTE: Only use the power adapter provided

3. The parent unit will display charging icon means the battery starts charging

USING THE BABY MONITOR

SETTING UP
Place the baby unit in a convenient location (e.g. on a table) or mount the baby unit on the wall. point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

NOTE
DO NOT place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the unit to the different locations, and ensure they are not close to other electrical equipment.

MONITORING SCREEN

1. Signal strength indicator
2. Temperature of the baby’s room
3. Lullaby is playing
4. VOX function activated
5. Alarm activated
6. Battery indicator
7. PTT function activated
8. Date and time (HH:MM AM/PM DD/MM)

MENU OPTIONS/MAIN MENU

Press “OK/Menu” Key at monitoring saeen will enler the main menu, it contains 4 items:

1. Camera
2. Alarm
3. VOX
4. Settings
   You can press the uup” Key or “down” Key to move the cursor to select an item and press ·Menu” key will enter the sub-menu which you selected. Press “Return” key will be back to the monitoring screen.

CAMERA REGISTRATION
Press “OK/Menu” key lo enter registering screen, then push the “pair” key on the back of baby unit within 10 seconds.
(The enclosed baby unit has already been registered, you do not need to register it again unless the baby unit loses its link with the parent unit. )

ALARM
Press “down” key to move the cursor and “up” key to change value

vox

• System mode
  This menu allows you to choose the working mode from the following: Normal modeNOX mode.

• VOX Sensitivity
  Switch the VOX sensitivity at Low/Medium/High level.

• Vibrator
  Press “up” key to choose ON/OFF

LANGUAGE
Language setting menu allows you to choose your language from the following: English/French/ Spanish /Portuguese/ltalian/GermanfTurkey/Russian

TIME AND DATE
There are 2 items in this menu (Set lime/ date & Set format) Press “down” key to move the cursor and “up” key to change the value.

TEMPERATURE UNIT
Switch the unit to Celsius or Fahrenheit.

ANTI-FLICKER
You are able to adjust the frequency of 50/60 HZ to suit your lighting for anti- flicker.

LCD BACKLIGHT
You are able to adjust the brightness of the LCD you are viewing .

SYSTEM INFO
Contains system information such as Project ID, Hardware version, Software version, build date etc.

TECHNICAL FEATURES

• Frequency: 2.4GHz digital
• Modulation mode: GFSK
• Operating temperature: -10 to +45°C
• Operating Humidity: <85%
• Range: 260m in open field Monitor
• LCD: 1.54-inch TFT LCD
• Resolution: 240 x 240 @20fps
• Battery: Li-polymer 390mAh
• Dimensions(W x H x D): 42 x 55 x 13 mm Camera
• Sensor: 0.3Mega pix CMOS
• Minimum illumination: 0Lux (IR on)
• Night vision distance: 15ft (5m)
• Lighting sensor
• Temperature sensor
• Dimensions (W x H x D) : 69 x 136 x 73 mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>