Shenzhen Feelstorm Technology BM915 Video Baby Monitor User Manual

Shenzhen Feelstorm Technology BM915 Video Baby Monitor User Manual

WELCOME to. •• your new Digital Baby Monitor!
Thank you for purchasing this product. Now you can see and hear your baby sleeping in the bed room or monitor your children playing in playroom. This User’s Gulde provides most of the Information you need to know to use this product.

We recommend you charge the parent unit before using it, so that it will continue to work if you disconnect it from the charger or carry it to another location. Please read the Safety Instructions before installing the product.

Got everything?

• 1 x Parent Unit (Monitor)
• 1 x Baby Unit (Camera)
• 2 x Power Adapters

Overview Of Your Baby Monitor

1. Safety Instructions

WARNING
This baby monitor complies with all relevant standards regarding electromagnetic  fields and can be used safely when operating in accordance with the instructions  in the user guide. Therefore, please read the instructions in this user guide carefully  before using the device.

• An adult is required to install. Keep small parts away from the children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
• Keep the cords out of the reach of children.
• Do not use the baby monitor near water or a heat source.
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

2. Getting Started

2.1 Baby unit (Camera) power supply

1. Connect the small plug of the power adapter to the baby unit and the other end to the
   mains socket.

2. A blue light led will display indicate the baby unit is working

2.2 Parent unit (Monitor) power supply
Charging the parent unit fully before use is recommended.This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the
   mains socket

2. The power indicating LED will illuminate, which means the battery start charging.

3. Press the power key and hold the key for at least 3 seconds to turn on the parent unit.

NOTE: Use only the power adapters included in the package.

3. Using The Baby Monitor

3.1 Setting up
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied  with the image in the parent unit.

Note:
Do not place the baby unit within baby’s reach!
If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment

3.2 Pairing camera
The baby unit has already been paired. You do not need to register them again unless
the baby unit loses connection with the parent unit. Learn section ‘5.2 Camera
Registration’ for more details.

3.3 Night vision
The baby unit has 6 high-intensity infrared LEDs for picking up clear images in the dark.

3.4 Music player
Press the Music Player key to turn on the music player and play a lullaby on the
baby unit; press the Music Player key again to turn it off.

3.5 Voice function
Press and hold PTT key on the parent unit to talk to your baby through the baby unit
loudspeaker. The symbol will be displayed at the bottom of the screen.

3.6 Adjusting the volume
When the video is playing mode, press volume key to adjust the volume. The display  will show the current volume for 3 seconds.

3.7 VOX function
In VOX mode, the screen will go into sleep automatically to save power. It will reactivate automatically, when it detects any sound in the baby’s room. Press VOX Key again to  turn to Normal mode.

3.8 Pan and tilt
In the monitoring interface, press the pan & tilt function key to activate the motor mode,  then press up / down / left / right key to remotely pan or tilt the camera. Press the  pan&tilt function key again or no operation for long time will exit the motor mode.

4. Monitoring Screen Icons

1. Signal strength indicator
2. Temperature of the baby’s room
3. Lullaby is playing
4. Alarm activated
5. VOX function activated
6. Motor mode activated
7. Battery indicator
8. PTT function activated
9. Date and time (HH:MM AM/PM DD/MM)
10. Volume Level Bar
11. Backlight Brightness Bar

5. Menu Options

5.4.2 Temperature unit
Switch the unit to Celsius or Fahrenheit.

5.4.3 Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker.

5.4.4 Camera power indicator
The power LED light of the baby unit can be turned on or off through the parent unit.

5.4.5 LCD backlight
You are be able to adjust the brightness of screen and the active time of LCD backlight at menu interface.

5.5 vox
5.5.1 System mode
This menu allows you to choose the working mode from the following: Normal mode / VOX mode.

5.5.2 VOX sensitivity
Change the VOX sensitivity to: Low / Medium / High.

5.6 Language
Language setting menu allows you to choose your language from the following :
English / Francais / Espanol / Portugues / Italiano / Deutsch / Türkce / PYCCKVIVI

5.7 System info
It contains system information such as hardware version, software version etc.

6. TECHNICAL FEATURES

• Frequency: 2.4 GHz Digital
• Modulation Mode: GFSK
• Operating Temperature: -10 to +450C
• Operating Humidity: 450/0
• Range: 260m in open field
  (The walls, windows, doors and stairs will weaken the signal.)

Monitor

• LCD: 3.2″ TFT LCD
• Resolution:
• Battery: Li-Polymer 1150mAh
• Dimensions (W x H x D): 72 X 124.5 X 17.5 mm

Camera

• Sensor: CMOS
• Minimum Illumination: OLux ( IR on)
• Night Vision Distance: 15ft ( 5m)
• Light sensor
• Temperature Sensor (Tolerance +2 Celsius)
• Dimensions (W x H x D): 72.5 X 116 X 66.2 mm

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1 )this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>