respekta GSPU42 Mini Table Dishwasher User Manual

User’s manual & Installation Instruction
Mini Table Dishwasher

Please keep this manual as a refer in the later days.

IMPORTANT SAFETY INSTRUCTIONS

WANING
When using your dishwasher , follow the precautions listed below:

• This appliance is intended to be used in household and similar applications such as:
  -staff kitchen areas in shops, offices and other working environments;
  -farm houses;
  -by clients in hotels, motels and other residential type environments;
  -bed and breakfast type environments.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and  knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. (For EN60335-1)

• This appliance is not intended for use by persons(including children )with reduced physical, sensory or mental capabilities, or lack of experienceand knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. (For IEC60335-1)

• This appliance is for indoor use only, for household use only.

• To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.

• Please unplug before cleaning and maintaining the appliance .

• Use a soft cloth moisten with mild soap, and then use a dry cloth to wipe it again.

Earthing instructions

• This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of an electric shock by providing a path of least resistance of  electric current. This appliance is equipped with a cord having an equipmentearthing conductor and a earthing plug.
• The plug must be plugged into an appropriate outlet that is installed and earth ed in accordance with all local codes and ordinances.
• Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician.
• Improper connection of the equipment-earthing conductor can result in the risk of an electric shock.
  Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly earthed.

General use

• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not operate your dishwasher unless all enclosure panels are properly in place.
• Open the door very carefully if the dishwasher is operating, there is a risk of water squirting out.
• Do not place any heavy objects on or stand on the door when it is open. The appliance could tip forward.
• When loading items to be washed:

1. Locate sharp items so that they are not likely to damage the door seal;
2. Warning: Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal position.

• Check that the detergent powder is empty after completion of the wash cycle.
• Do not wash plastic items unless they are marked dishwasher safe or the equivalent. For plastic items without mark, check the manufacturer’s recommendations.
• Use only detergent additives designed for an automatic dishwasher.
• Never use soap, laundry detergent, or hand washing detergent in your dishwasher.
• Children should be supervised to ensure that they do not play with the appliance.
• The door should not be left open, since this could increase the risk of tripping.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• During installation, the power supply must not be excessively or dangerously bent or flattened.
• Do not tamper with controls.
• The appliance is to be connected to the water mains using new hose sets and that old hose-sets should not be reused.
• The maximum permissible inlet water pressure is 1MPa.
• The minimum permissible inlet water pressure is 0.04MPa.

Disposal

• For disposing of package and the appliance please go to a recycling center. Therefore cut off the power supply cable and make the door closing device unusable.
• Cardboard packaging is manufactured from recycled paper and should be disposed in the waste paper collection for recycling.
• By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be  caused by inappropriate waste handling of this product.
• For more detailed information about recycling of this product, please contact your local city office and your household waste disposal service.
• DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

GETTING TO KNOW YOUR APPLIANCE

IMPORTANT:
Before using this dishwasher for the first time and to get the best performance, read these instructions.

Dishwasher features

Control panel

Rapid
A shorter wash for lightly soiled loads that do not need drying.
Intensive
For extremely dirty cooking tools and cutlery using, it will be drying after washing.
ECO
This is standard program, it is suitable to clean normally soiled tableware and it is the most efficient  program in terms of its combined energy and water consumption for that type of tableware.
Extra Dry| To select the extra dry function.
Start/Pause| Press this button to start or pause the dishwasher.

USING YOUR DISHWASHER

Loading the dishwasher baskets
Recommendation

• Consider buying utensils which are identified as dishwasher-proof.
• Use a mild detergent that is described as ‘kind to dishes’. If necessary, seek further information from detergent manufacturers.
• For particular items, select a program with as low temperature as possible.
• To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the program has ended.

Suitability of use in the dishwasher
Not suitable for use:

• Cutlery with wooden, horn, china or mother-of-pearl handles
• Plastic items that are not heat resistant
• Older cutlery with glued parts that are not temperature resistant
• Bonded cutlery items or dishes
• Pewter or copper items
• Crystal glass
• Steel items subject to rusting
• Wooden items
• Items made from synthetic fibres

Limited suitability:

• Some glasses can become dull after a large number of washes.
• Silver and aluminium have a tendency to discolour during washing.
• Glazed patterns may fade if washed frequently.

Attention before or after loading the dishwasher baskets
(For the best performance of the dishwasher, follow these loading guidelines.
Features and appearance of baskets and cutlery baskets may vary from your model.) Scrape off any large food paritcles. Soften remnants of burnt food in pans. It is not
necessary to rinse the dishes under running water. Place objects in the dishwasher in following way:

• Items such as cups, glasses, pots/pans, etc. are face downwards.
• Curved items, or those with recesses, should be loaded at aslant so that water can run off.
• All utensils are stacked securely and can not tip over.
• All utensils are placed in the way that the spray arms can rotated freely during washing.

NOTE
Very small items should not be washed in the dishwasher as they could easily fall out of the basket.

• Load hollow items such as cups, glasses, pans etc. with the opening facing downwards so that water cannot collect in the container or a deep base.
• Dishes and items of cutlery must not lie inside one another, or cover each other.
• To avoid damage to glasses, they must not be touched.
• Long bladed knives stored in an upright position are a potential hazard!
• Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the basket.
• Please do not overload your dishwasher. This is important for good results and for reasonable energy consumption.

Loading basket
Position the dishes and cookware so that they will not get moved by the spray of water.

Loading the cutlery basket

For personal safety and a top quality clean, make sure place the silverware in the basket as follows:

• They do not nest together.
• Place silverware with handles-down.
• But place knives and other potentially dangerous utensils handles-up.

Folding back the rack shelives
The spikes are used for holding plates and a platter. They can be lowered to make more room for large items.

Filling the dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes and utensils, which can leave spots and streaks.

WANING

• Only use detergent specifically for dishwashers.
  Never use any other rinse aid and detergents.
  This will damage the appliance.

Dishwasher detergent is corrosive!
Keep dishwasher detergent out of the reach of children.

Adding detergent

PROGRAMMING THE DISHWASHER

Wash cycle table
The table below shows which programs are best for the levels of food residue on them and how much detergent is needed. It also show various information about the programs.

Program| Description
Of Cycle| Detergent| Time
(min)| Energy
(Kwh)| Water
(L)
---|---|---|---|---|---
Rapid| Wash (58 )
Rinse
Rinse (57℃)
℃| 4.5 g| 29| 0.33| 4.8
Intensive| Wash(62℃)
Rinse
Rinse(70℃)
Drying| 4 .5 g| 175| 0.52| 5 . 8
( *EN 50242)| Wash (55 ℃)
Rinse
Rinse (72℃)
Drying| 4 .5 g| 165| 0.43| 4.8

NOTE
EN 50242:
test in accordance with EN 50242, are as follows:
This program is the test cycle. The information for comparability
The power consumption of off-mode is 0.45W, left-on mode is 0.49W

Turning on the appliance
Starting a wash cycle…
Draw out the basket(see the section entitled “Loading the Dishwasher”).
Pour in the detergent (see the section“Fill the detergent”).
Insert the plug into the socket. The power supply is 220-240VAC 50 HZ, the specification of the socket is 10 A 250 VAC.
Press the power button to turn on the appliance.
Connect the inlet hose to the tap, make sure that the water supply is turned on to full pressure, or add water to the tank manually.
Select a suitable program according to the “Wash cycle table”.
If a program is selected, the response light will be on. Then press the Start/ Pause button, the dishwasher begins to start.

Change the program
A wash cycle can only be changed if it has been running for a short time otherwise, the detergent may have already been released and the dishwasher may have already drained  the wash water. If this is the case, the dishwasher needs to be reset and the detergent dispenser must be refilled. To reset the dishwasher, follow the instructions  below:

1. Press the Start/Pause button to pause the washing.
2. Press Program button for more than 3 seconds, the machine will be in stand by state.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, after 10 seconds, the dishwasher will start.

Forget to add a dish?
A forgotten dish can be added any time before the detergent dispenser opens. If this is the case, follow the instructions below:

1. Press the Start/Pause button
2. Open the door a little to stop the washing.
3. After the spray arms stop working, you can open the door completely.
4. Add forgotten dishes.
5. Close the door.
6. Press the Start/Pause button, the dishwasher will run.

At the end of the Wash Cycle
When the working cycle has finished, the buzzer of dishwasher will sound 8 seconds, then stop. Turn off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher. Wait a few minutes before unloading the dishwasher to avoid scald, the dishes and utensils are still hot and more susceptible to  breakage. They will also dry better.
Switch Off the Dishwasher

1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap!

Open the door carefully
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down around 15 minutes before removing from the appliance.
Open the dishwasher’s door, leave it ajar and wait a few minutes before removing the dishes. In this way they will be cooler and the drying will be improved.

Unloading the dishwasher
It is normal that the dishwasher is wet inside.

MAINTENANCE AND CLEANING

Filter system
WANING

• Never use the dishwasher without filters!
• Make sure the filter is properly assembled.

The performance may be affected and dishes and utensils could become damaged.
The filter efficiently
recycled during the cycle.
For best performance and results, the filter assembly must be cleaned regularly.
For this reason, it is a good idea to remove the larger food particles trapping in the filter after each wash cycle by rinsing the filter and cup under running water.
To remove the filter assembly, pull the cup handle in the upward direction.

Step 1: Contrarotate the filter assembly, then lift it all up.
Step 2: Lift fine filter up from main filter.

Caring for the Dishwasher
The control panel can be cleaned by using a lightly dampened cloth. After cleaning, make sure to dry it thoroughly. For the exterior use a good appliance polish wax.Never  use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Cleaning The Door
To clean the edge around the door, you should use only a soft warm, damp cloth.
To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.

WANING
Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components.
Abrasive agents or some paper towel should not be used because of the risk of scratching or leaving spots on the stainless steel surface.

Cleaning the spray arms
The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging. Wash them under running water and carefully replace them in their  seats, checking that their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms under a jet of running water and replace it carefully to its seat. After reassembly, check that  the spray arms rotate freely. Otherwise, check that they have been installed correctly.

How to keep your dishwasher in shape
After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water an a little vinegar, or a cleaning product made specifically for dishwashers.
When not in use for a longtime
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the  appliance slightly open. This will help the door seals to last longer and prevent odours from forming within the appliance.
Moving the appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.

INSTALLATION

WANING
Electrical Shock Hazard
Disconnect electrical power before installing dishwasher.
Failure to do so could result in death or electrical shock.

Attention
The installation of the pipes and electrical equipments should be done by professionals.
Installation preparation
The installation position of dishwasher should be near the existing water inlet tap and drain outlet and power socket.
One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher.
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped  with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Water Connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened tightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.
Please Note: If the supplied hose cloes not fit your tap, please contact your local plumbing supply center where adapters are available for purchase.

Connection of drain hoses
Fix the drain pipe with the back pipe of the machine.The interface is fitted with clamps and tightened with a screwdriver.

The connection of the drain pipe: Put end of the drain into a sink or bucket.

How to Drain Excess Water From Hoses
If the sink is more than1000 mm higher than the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable container that is held outside and lower than the sink.

TROUBLESHOOTING TIPS

Before calling for service
Reviewing the charts on the following pages may save you from calling for service.

Dishwasher doesn’t
start| Fuse blown, or the
circuit break tripped.| Replace fuse or reset circuit breaker.
Remove any other appliances sharing the same circuit with the dishwasher.
Power supply is not
turned on.| Make sure the dishwasher is turned on and the door is closed securely.
Make sure the power cord is properly plugged into the wall socket.
Water inflow abnormal;
Water pressure is low| Check that the water supply is connected properly and the water is turned on.
Door of dishwasher
not properly closed.| Make sure to close the door properly and latch it.
Water not pumped
form dishwasher| Twisted  or trapped
drain hose.| Check the drain hose.
Filter clogged.| Check  coarse the filter.
Kitchen sink clogged.| Check the kitchen sink to make sure it is draining well.If the  problem is the kitchen sink that is not draining , you may need a  plumber rather than a serviceman for dishwashers.
Suds in the tub| Wrong detergent.
| Use only the dedicated dishwasher detergent to avoid suds. If  suds exist in the washer. Open the door for 20-30 minutes to  allow the foam to evaporate. If the foam still exists in the liner.  Add 1.5L of water to the liner, close the dishwasher door and run  the machine for a few minuites to drain it with the water.  Repeat above operation until the foam is cleared.

Technical information

References

• Respekta - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>