Feelstorm VB603-C Digital Video Baby Monitor Instruction Manual

Feelstorm VB603-C Digital Video Baby Monitor

WELCOME…
to your new digital Baby Monitor!
Thank you for purchasing the product. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. This User’s Guide provides you with all the information
you need to get the most from your product. Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the mains power to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

• 1 x Parent Unit
• 1 x Baby Unit
• 2 x Power adapter

Overview of your Parent unit

1. Power Key
2. Power adapter connector
3. Lcd display
4. Microphone
5. Charging indicating led
6. Power / Signal indicating led
7. VOX Key
8. Music play on/ off key
9. PTT Key
10. Speaker
11. OK / Menu Key
12. Return Key
13. Volume + / Up
14. Volume – / Down

Overview of your Baby unit

1. Light Sensor
2. Camera Lens
3. Power indicating LED
4. Microphone
5. Infrared LED
6. Power Key
7. Power adapter connector
8. Temperature Sensor
9. Pair key
10. Speaker

Safety Instructions

WARNING
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
• Keep the cords out of reach of children.
• Do not use the baby monitor near water or a heat source
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

Getting started

Baby unit power supply

1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket. NOTE: Only use the power adapter provided
2. A blue light led will display indicate the baby unit is working

Parent unit power supply

Charging the parent unit fully before use is recommended.
This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket NOTE: Only use the power adapter provided
2. The charging LED will illuminates means start charging the battery
3. Push the power key to ON side to turn on the parent unit.

Using the Baby Monitor

Setting up
Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

NOTE
Do not place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.

Pairing camera
The enclosed baby unit has already been registered , You do not need to register it again unless the baby unit loses its link with the parent unit. See section “5.2 Camera Registration” for more details.

VOX Function
Press VOX key will turn on VOX mode, The VOX mode
automatically puts the display in sleep mode to save battery. It reactivates automatically when it detects noise in the baby’s
room.

music player
Press music key will turn on the music player and play lullaby through the baby unit; pressing music key again will turn off it.

Talk function
Press and hold PTT key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.

Adjusting the volume
When the video is playing mode, press Volume- key to decrease volume or the Volume+ key to increase volume. The display will show the current volume for 5 seconds.

Monitoring Screen Icons

1. Signal strength indicator
2. Temperature of the baby’s room
3. Lullaby is playing
4. Vox function activated
5. Alarm activated
6. Battery indicator
7. PTT function activated
8. Date and time ( HH:MM AM/PM DD/MM )

Menu Options

Main menu

Press “OK/Menu” key at monitoring screen will enter the main menu, It contains 6 items :

1. Camera
2. Alarm
3. Settings
4. VOX
5. Languages
6. System info
   You can press the “Up” key or “Down” key to move the cursor to select an item and press “Menu” key will enter the sub-menu which you selected. Press “Return” key will back to monitoring screen

Camera Registration

Press “OK/Menu” key to entry registering screen, then push the pair key on the back of baby unit within 10 seconds.

**Alarm**

Press ”PTT” key to move the cursor and “Up/Down” key to change value .

Settings

Time and date
There are contains 2 items in this menu Set time / date Set format

Press ”PTT” key to move the cursor and “Up/Down” key to change value .

Temperature unit
Switch the unit to Celsius or Fahrenheit

Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker

LCD backlight
You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.

VOX

System mode
This menu allows you to choose the working mode from the following: Normal mode / VOX mode 5.5.2 VOX Sensitivity Switch the Vox sensitivity at Low / Medium / High level

Language
Language setting menu allows you to choose your language from the following :

• English
• French ( Francais )
• Spanish ( Espanol )
• Portuguese ( Portugues )
• Italian ( Italiano )
• German ( Deutsch )
• Turkey ( Turkce )
• Russian

System info
There are contains system information such as Project id, Hardware version, software version, build date etc.

TECHNICAL FEATURES

• Frequency: 2.4 GHz Digital
• Modulation Mode: GFSK
• Operating temperature: -10 to +45°C
• Operating Humidity: <85%
• Range: 260m in open field

Monitor

• LCD: 3.2 “ TFT LCD
• Resolution: 320X240@20fps
• Battery: Li-Polymer 750mAh
• Dimensions (W x H x D): 120mm x 70mm x 17mm

Camera

• Sensor: 0.3Mega pix CMOS
• Minimum Illumination: 0Lux (IR on)
• Night Vision Distance: 15ft (5m)
• Lighting sensor
• Temperature sensor
• Dimensions (W x H x D): 67mm x 106mm x 67mm

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any inte rference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>