Shenzhen Feelstorm Technology Co Ltd BM906 Video Baby Monitor User Manual

Video Baby Monitor
Model: BM906

User Manual
Ver.1.0

SAFETY INSTRUCTIONS

• Adult assembly is required. Keep small parts away from the children when assembling.
• Avoid placing the unit or cords in the cot or within baby’s reach. Keep at least 1 meter away.
• Do not touch plug contacts with sharp or metal objects.
• Keep the product away from water or heat sources.
• ONLY use the power adapters provided.

CAUTION

• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• About Echo:If the monitor is too close to the camera, an echo may occur. Keep them apart or lower the volume to eliminate noise.
• The camera has no built-in battery; It MUST be connected with a power adapter while working.
• Charging the monitor fully before use is recommended; it operates on battery during power failures.
• Unplug the product when unused for extended periods or during lightning storms.
• Clean the camera with soft DRY fabric.
• For indoor use only.

STATUS BAR

1. Signal Strength Indicator
2. Channel Selected
3. Temperature Of The Baby’s Room
4. Zoom Level
5. Lullaby Plays
6. VOX Function Activated
7. Alarm Activated
8. Time
9. Battery Power
10. Selective View Activated
11. Volume Bar
12. Brightness Bar
13. PTT Function Activated

PRODUCT DIAGRAM

Monitor / Parent Unit

1. Signal LED Indicator
2. Charging LED Indicator
3. Power ON / OFF / Sleep Button
4. Menu / OK Button
5. VOX Mode Button
6. ZOOM Button
7. Navigation Buttons
8. Lullaby Control / PTT Button
9. Microphone
10. Volume Level LED
11. LCD Screen
12. Kickstand
13. Speaker
14. Power Adapter Port

Camera / Baby Unit

1. Light Sensor
2. Camera Lens
3. Power lndicator
4. Microphone
5. Infrared LED
6. Power Switch
7. Power Adapter Port
8. Temperature Sensor
9. Pair key
10. Speaker

GETTING STARTED

Step 1. Powering the Camera / Baby Unit

1. Plug the power adapter into an electrical outlet and connect it to the Type-C port on the camera.
2.  A BLUE indicator will light up when the camera is running (optional).

Step 2. Charging the Monitor / Parent Unit

1. Plug the power adapter into an electrical outlet and connect it to the Type-C port on the monitor.
2. A BLUE indicator will light up, indicating that the battery is charging.
3. Press and hold the Power button for at least 3 seconds to turn the monitor on.

Step 3. Camera Registration

1. Press Menu / OK to enter the registration interface. Choose [Camera->Add Camera-> Camera 1], then press Menu / OK to confirm registration.
2. Press the Pair button on the back of the camera within 15 seconds to complete the registration.

Note: The camera is pre-registered by default. You only need to re- register if the camera loses connection with the monitor.For additional details on managing multiple cameras, please refer to the MULTIPLE-CAMERA OPERATION instructions.

Step 4. Placing the Camera

1. Position the camera in a convenient location, such as on a table, and aim the camera lens towards the desired monitoring area.
2. Adjust the camera’sangle until you are satisfied with the image in the monitor.

Note: DO NOT position the camera within the baby’sreach. If there is any interference with the image or sound, try relocating the units to different spots, ensuring they are not too close to other electrical equipment.

FUNCTIONS & OPERATIONS

1. Adjusting monitor’s volume
   Use the UP / DOWN button to adjust the volume. The current volume icon will stay on the screenfor3seconds.

2. Adjusting screen’s brightness
   Press the Right / Left buttons to adjust the screen brightness.

3. Intercom function
   Hold PTT Button on the monitor to speak to your baby through the camera’sspeaker. A microphone icon will appear on the screen.

4. Digital zoom & selective view
   Press the Zoom Button to zoom in on the screen image. Choose from three levels of magnification (1X / 2X / 3X switching in cycle).
   Press the corresponding navigation buttons to move the image to the desired view.

5. Night vision
   When ambient light is insufficient, the camera automatically enters Night Vision Mode, the image turns to black and white.

6. Audio mode
   Quickly press the Power Button to activate Audio Mode, unavailable if VOX is on. In Audio Mode, the screen shuts down, saving energy while audio transmission continues. Press any button to exit Audio Mode.

7. Main menu
   Press Menu/OK in the monitoring interface to enter the main menu, containing 6 items.
   Use the navigation buttons to move the cursor, select an item, and press Menu / OK to enter the submenu.
   Press the Back button to return to the monitoring interface.

7.1. Camera:
7.1.1. Add Camera: Refer to GETTING STARTED-Step 3 for instructions.
7.1.2.Camera Power Light: Set the power indicator on the camera to Auto / Always On / Always Off on the monitor.
7.1.3.Intercom Volume: Adjust the intercom volume heard on the camera to Low / Medium / High level.

7.2. Alarm:
Press Menu / OK to enter editing mode or confirm the current item.
Press Up / Down to skip to the next item
Press Left / Right to change the value.
Press Back to go back to the previous menu.

7.3. Settings:
7.3.1. Time: You can switch the time format to a 24H or 12H clock. To adjust the time, use the Up / Down buttons to change the value and the Right / Left buttons to move the cursor.
7.3.2. Temperature Unit: Choose between Celsius or Fahrenheit.
7.3.3. Anti-Flicker: Select 50/60 Hz options to match your local power frequency for anti-flicker.
7.3.4. Alerts Tone: Toggle the alert tone of low battery and interrupted connection. Choose from three tones.
7.3.5. Monitor LED Light:Toggle the status of the LED indicator on the parent unit: OFF / Low / Medium / High
7.3.6. LCD Backlight: Adjust the brightness and screen activity time.

7.4. VOX (Voice Activation):
In VOX mode, the screen sleeps to save energy and wakes up when the camera’s mic hears a sound. Press the VOX Mode Button or use the VOX submenu to enable / disable this mode.
7.4.1. System Mode: Switch between Normal Mode and VOX Mode.
7.4.2. VOX Sensitivity: Adjust sensitivity to Low / Medium / High.

7.5. Language:
Choose from 8 languages: English / Français / Español / Português / Italiano / Deutsch / Türkçe / Русский.
7.6. System Info:
System Info: View hardware and software versions.

MULTIPLE-CAMERA OPERATION

1. Add / Delete Camera:

• Press Menu / OK to enter the registration interface. Select [Camera-> Add Camera->Camera 2], then press Menu / OK to confirm registration.
• Press the Pair button on the back of the camera within 15 seconds to complete registration.
• Same process applies to registering more cameras.
• To disconnect a camera, select [Delete Camera], choose the associated camera, and press Menu/OK to cancel registration.

Note: One monitor can pair with up to four appointed cameras simultaneously,including both fixed-view and pan-tilt cameras.

2. Change Camera Channels:

• Select [View Camera] then press Menu / OK on the desired Camera channel (Camera 1/Camera2/Camera3/Camera4).
• For automatic channel changes, choose [Scan] and press Menu / OK. Then select [Scan Delay] to set the intervals for view changes (10 / 15 / 20 / 30 seconds).
• On the monitoring interface, press and hold the Left or Right Button to cycle through channels quickly.

3. Change settings on different cameras:
Adjusting settings on one camera on the monitor will update settings for all connected cameras, including VOX mode on / off, camera speaker volume, and camera LED Auto / On / Off. The digital zoom& selective view function is the only setting that cannot be  changed simultaneously.

SPECIFICATIONS

General:

RF Frequency:| 2400 MHz — 2483 MHz
Modulation Mode:| GFSK
Spread Spectrum:| FHSS
Operating Temperature:| -10 to +45°C
Operating Humidity:| <85%
Transmission Range:| Up to 1000 feet in open field
Monitor:
LCD Display:| 4″ IPS LCD
Resolution:| 800 X 480 pixel
Battery:| 1760mAh Li-ion 3.7V rechargeable
Duration(Screen ON):| 6.5Hours ( 3 Level LCD backlight)
Duration(Audio-only mode):| 11 Hours (3 Level volume)
Time To Full Charge:| 4.5Hours
Power Adapter:| Input: 100-240VAC,50-60Hz; Output: 5V / 1.0A ,Type C
Dimensions (W x H x D):| 140 X 75 X 19.3 mm
Camera:
Sensor:| CMOS 1280 X 720 pixel
Night Vision Control:| Auto,1 low light sensor
Night Vison Range:| 15ft (5m)
Temperature sensor:| Support
Power Adapter:| Input: 100-240VAC,50-60Hz; Output: 5V / 1.0A,Type C
Dimensions (W x H x D):| 66 X 106 X 66 mm

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC STATEMENT
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The term “IC: “ before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>