CosmicByte ARES Wireless Controller User Manual

ARES
WIRELESS CONTROLLER
User Manual

ARES Wireless Controller

SPECIFICATIONS

CONTROLLER DESIGN

MODE AND INDICATOR STATUS

1. X INPUT: BLUE
2. DIRECT INPUT : RED
3. PC ANALOG: YELLOW
4. ANDROID: GREEN
5. PS3: AUTOMATIC

PLATFORM & CONNECTION:

PC: Windows
Plug and Play for Windows 8 and above
Android/PS3: No driver required

NOTE: Android: Android 4.0 above, Requires OTG function. Connect the gamepad to the phone using an OTG cable and wireless dongle.

Please contact android device manufacturer for android compatibility.
Android compatibility is not covered under warranty.

POWER OFF

Press B + Back Button for 5 seconds to turn o the controller

CHANGE MODE

Press the HOME key for more than 5 seconds: X-input and Direct input.

ABXY LED AND V LED SWITCH

1. Press X+ Back button to turn off the ABXY LED , and the press again to turn on LED.
2. Press A + Back button to turn off the V LED , and the press again to turn on LED.

LEFT JOYSTICK AND D-PAD SWITCH

Press L3+back change joystick and D-pad

DEVICE CONNECTION

Connect the gamepad with the PC using the wireless dongle. Make sure there is no obstruction between the gamepad and the dongle for the best connection. Use the USB Extension cable for best results.
NOTE:

1. You do not need to change the mode while connecting the gamepad to android and PS3.
2. Gamepad will connect to Windows as X-input automatically.
3. If any diffculty in connecting the gamepad to Windows, please reconnect the gamepad.

TURBO – A, B, X, Y, L1, L2, R1, R2

1. Set turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you want to set Turbo and then press turbo button.
2. Cancel turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you want to cancel Turbo and then press turbo button.

AUTO TURBO – A, B, X, Y, L 1, L2, R1, R2

1. Set AUTO turbo: Press (A, B, X, Y, L1, L2, R1, R2)) button where you want to set Turbo and then press AUTO button.
2. Cancel AUTO turbo: Press (A, B, X, Y, L1, L2, R1, R2) button where you want to cancel Turbo and then press AUTO button.

BATTERY:

1. When the battery is low, the LED will flash and gamepad will turn off the vibration to save battery.
2. When gamepad is being charged the LED will flash slowly.
3. When the charging is complete, the LED will turn off.

Note : Use only 5A/1V chargers or plug it to a PC USB port to charge the gamepad. Using Fast chargers can damged the battery and compo- nents.
Warranty will be void with usage of fast charging.

TROUBLESHOOTING

HOW TO PAIR ARES CONTROLLER TO THE DONGLE

If the dongle and Controller Home button led light is continuously blinking it indicates that both are not paired to each other

PAIRING STEPS

1. Plug in the receiver to your PC
2. Press the Home button on the Controller
3. Now press the Home button twice when the lights start blinking
4.  Both the LED on dongle and controller will stop blinking
5. The controller is now ready for use

SUPPORT DETAILS

Phone:  1800 31300 7700 (Mon-Fri 10am to 5PM)
Email:  [email protected]
FAQ: support.thecosmicbyte.com

WARRANTY

The Controller carries 1 Year warranty against manufacturing defects only.
Physical, Water damage and Tampered products are not covered under warranty.
Regular wear and tear from battery usage is not covered under warranty.

Scan the QR code to know the Warranty Claim Procedure.

https://www.youtube.com/watch?v=I2vxO17Sprs &t=2s

FAQ’S support.thecosmicbyte.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>