Shenzhen Feelstorm Technology VB601-M Digital Video Baby Monitor User Guide

Shenzhen Feelstorm Technology VB601-M Digital Video Baby Monitor

Overview of your Parent unit

1. Lcd display
2. Signal indicating led
3. Power indicating led
4. Menu key / Music play control key(long press)
5. Power key / Return key
6. Volume – key / Down key (menu screen)
7. Volume + key / Up key (menu screen)
8. PTT key
9. Microphone
10. Speaker
11. Power adapter connector

Overview of your Baby unit

1. Light Sensor
2. Infrared LEDS
3. Camera Lens
4. Power LED
5. Microphone
6. Speaker
7. Pair key
8. Temperature Sensor
9. Power adapter connector

Safety Instructions

WARNING
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Do not place the baby unit or cables in the cot or within arm’s reach of the baby (at least 1 meter away).
• Keep the cords out of reach of children.
• Do not use the baby monitor near water or a heat source
• Only use the power adapters provided.
• Do not touch the plug contacts with sharp or metal objects.

Getting started

Baby unit power supply

1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket. NOTE: Only use the power adapter provided
2. A green light led will display indicate the baby unit is working

Parent unit power supply

Charging the parent unit fully before use is recommended.
This will allow the unit to operate on battery in the event of a power failure.

1. Connect the plug of the power adapter to the parent unit and the other end to the mains socket
   NOTE: Only use the power adapter provided

2. The LCD screen illuminates and starts up automatically after a few seconds.

3. Press and hold key at least 3 seconds to turn on the parent unit.

Using the Baby Monitor VB601

Setting up

• Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.
• To mount the baby unit on the wall, see section “9. Wall mounting instructions” for more details.

NOTE
Do not place the baby unit within baby’s reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.

Pairing camera
The enclosed baby unit has already been registered , You do not need to register it again unless the baby unit loses its link with the parent unit. See section “5.2 Camera Registration” for more details.
Night vision
The baby unit has 8 high-intensity infrared LEDs for picking up clear images in the dark.
music player
Press and hold key at least 3 seconds will turn on the music player and play lullaby through the baby unit; long press the key 3 seconds again will turn off it.
Talk function
Press and hold key on the parent unit to talk to your baby through the baby unit loudspeaker. The symbol will be displayed at the bottom of the screen.
Adjusting the volume
When the video is playing mode, press key to decrease volume or key to increase volume. The display will show the current volume for 5 seconds.
Reset the parent unit
Press and hold key at least 8 seconds, the parent unit will be forced to restart.

Monitoring Screen Icons

1. Signal strength indicator
2. The temperature of the baby’s room
3. Lullaby is playing
4. Alarm activated
5. Battery indicator
6. PTT function activated
7. Date and time ( DD/MM HH:MM AM/PM)

Menu Options

Main menu

Press the “Menu” key at the monitoring screen will enter the main menu, It contains 4 items :

1. Camera
2. Alarm
3. Settings
4. System info

You can press the “Up” key or “Down” key to move the cursor to select an item and press “Menu” key will enter the sub-menu which you selected. Press “Return” key will back to monitoring screen

Camera Registration

Press the “menu” key to the entry registering screen, then push the pair key on the back of baby unit within 10 seconds.

Alarm

Press the “Down” key to choose an item, the” PTT” key to move the cursor and the “Up” key to change the value .

Settings

Language
The language setting menu allows you to choose your language from the following: English / French / Spanish / Portuguese / Italian / German / Turkey

Time and date
There are contains 2 items in this menu

• Set time / date
• Set format

Press the “Down” key to choose an item, the” PTT” key to move the cursor and the “Up” key to change value .

Temperature unit
Switch the unit to Celsius or Fahrenheit

Anti-flicker
You are able to adjust the frequency of 50 / 60 HZ to suit your lighting for anti-flicker
System mode
This menu allows you to choose the working mode from the following: Normal mode / VOX mode 5.4.5 VOX Sensitivity Switch the Vox sensitivity at Low / Medium / High level

LCD backlight

You are be able to adjust the brightness of the LCD you are viewing and the LCD backlight active time in menu operation.

System info

There are contains system information such as software version , hardware version, build date etc.

Wall mounting instructions

1. Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws
2. Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your baby unit with the screws and push it down.
3. Point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>