Ningbo Cstar Imp Exp 0089 Illuminating Wireless Speaker Instruction Manual
- June 6, 2024
- Ningbo Cstar Imp Exp
Table of Contents
Illuminating Wireless Speaker
Instruction Sheet
In The Box:
1 x Wireless Speaker
1 x Micro USB Cable
1 x Audio Cable
1 x Instruction Sheet
Specification:
Battery: 300mAh
Wireless version: 5.0
Playing time: 3-4 hours
Charging time: 2 hours
Dimension: 62 x 62 x 59mm
Pairing Instruction:
- Move the power switch to the “ON” position. A prompt will sound and the speaker will flash to indicate that it is in pairing mode.
- On your mobile device, turn Bluetooth on, search for Bluetooth devices, and select “Light-up Speaker”.
- If prompted for a password, enter 0000. The speaker will connect to your device and be ready for use.
- To disconnect the speaker from your device and pair it with a different device, hold down the play button until the speaker starts to flashing.Return to Step 2 to pair the speaker with other devices.
- To adjust speaker volume, press and hold the next or previous song buttons.
Hands-Free Calling:
To answer an incoming call or end an ongoing call, press the play button on
time. To refuse an incoming call, do so on your device directly.
Line-in Function:
Use the provided 3.5mm audio cable to connect the speaker to any device with a
3.5mm audio output port. Charging the Speaker:
- Plug the provided micro USB charging cable into the speaker and an active computer USB port or a USB AC adapter that is plugged into an active wall outlet.
- The indicator LED will glow red while charging and turn off once charging has completed.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1)This device may not cause harmful
interference, and 2)This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, th1e4re is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used inthe portable exposure condition with restiction
FCC ID : 2ABHA0089 Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>