Jacuzzi PRO3TECT DSMT Ozone Generator Aftermarket Kits Instructions

: June 13, 2024
: Jacuzzi

Table of Contents

120/240V Ozone Generators
240V Kits AMP Kits
Cover Lifts and Components
Older Cover Lift Components
SmartTub™ Controllers
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CLEARRAY® PRO3TECT™ Aftermarket Kits

120/240V Ozone Generators

6473-327, OZONE:CD 120/240V 25MG AMP CON. Factory installed after May 2022 on all J-400, J-300, & J-200 models up to Rev H. Can be used in place of any AMP connector ozone model.
6473-473, Kit: Ozone 120/240V AMP connector. Includes 6473-327 and all necessary installation hardware.

240V Kits AMP Kits

6472-526, CLEARRAY® PRO3TECT™ Ozone Unit, 240V 50/60Hz 25MG (AMP); Fits all 240V J-500, 2016+ J-400, 2016+ J-300, 2018+ J-200, and 2018+ J-100 series hot tubs using AMP circuit board connectors only.
6472-529, Kit (Not Shown): CLEARRAY® PRO3TECT™ 240V 50/60 TE AMP (Complete);
This kit is offered for customers that want to add an ozone generator to their existing CLEARRAY® system. The kit includes all necessary components, hardware and instructions for installation. This kit is compatible with all 240V J-500, 2016+ J-400, 2016+ J-300, 2018+ J200, and 2018+J-100 series hot tubs using AMP circuit board connectors.

240V Kits DSM &T Kits
6472-515, CLEARRAY® PRO3TECT™ Ozone Unit, 240V 50/60Hz 25MG OutputDSM&T; Fits 2011-2019 J-LX and J-LXL, and 2017 and earlier 240V J-200 and J-100 Models with DSM&T circuit board connectors.
6472-683, Kit (Not Shown):
CLEARRAY® PRO3TECT™ 240V 50/60Hz 25MG-DSM&T
(Complete); This kit is offered for customers that want to add an ozone generator to their existing CLEARRAY® system. The kit includes all necessary components, hardware and instructions for installation. This kit is compatible with all 2011-2019 J-LX and J-LXL, and 2017 and earlier 240V J-200 and J-100 models using DSM&T circuit board connectors.

120V Kits AMP Kits
6472-740, CLEARRAY Ozone Unit, 120V 60Hz 25MG (AMP); Fits All 2016+ J-325, J-315, 2018+ J-225, J-215, J-210, and 2018+ J-125, J-115 convertible models using AMP circuit board connectors only.
6472-697, Kit (Not Shown): CLEARRAY® PRO3TECT™ ® PRO3TECT 120V 60Hz 25MG-AMP
(Complete); This kit is offered for customers that want to add an ozone generator to their existing CLEARRAY® system. The kit includes all necessary components, hardware and instructions for installation. This kit is compatible with all 2016+ J-325, J-315, 2018+ J-225, J-215, J-210, and 2018+ J-125, J-115 convertible models using AMP circuit board connectors only.

120V Kits DSM &T Kits
6472-696, CLEARRAY® PRO3TECT™ Ozone Unit, 120V 60Hz 25MG Output-DSM&T;
Fits All 2017 and older convertible J-200 and J-100 models.
6472-686, Kit (Not Shown): CLEARRAY® PRO3TECT™ 120V 60Hz 25MG-DSM&T
(Complete); This kit is offered for customers that want to add an ozone generator to their existing CLEARRAY® system. The kit includes all necessary components, hardware and instructions for installation. Fits All 2017 and older convertible J-200 and J-100 models.

CLEARRAY® PRO3TECT™ Frame Mount
6570-286, Mount, UV/Ozone for 10/17-2018 J-445 Models Only
6570-291, Mount, Wiring Clamp for 10/17-2018 J-445 Models Only (Not Shown)

Cover Lifts and Components

Jacuzzi Cover Lifts
6473-236, Cover Lift, Manual

6473-238, Cover Lift, Hydraulic Assist, includes shim kit for ProFinish siding, may require additional hardware (below) depending on spa model
6473-306, Kit, Cover Lift, Hydraulic Assist for J-400 models EXCEPT J-495, includes shim kit for ProFinish siding and J-400 corner brackets
6473-307, Kit, Cover Lift, Hydraulic Assist for J-495, includes shim kit for ProFinish siding, J-400 corner brackets, and extension arms
6000-518, Corner Bracket Extension, J-500, Required to fit 6473-238 to J-500 models (not shown)
6000-513, Pivot Arm Extension, required to fit 6473-238 to J-495 (not shown)
6000-514, Corner Bracket Extension, J-400, Required to fit 6473-238 to J-400 models (not shown)

ULTRALIFT Cover Lifts

6473-255, Cover Lift, ULTRALIFT Manual

6473-214, Cover Lift, ULTRALIFT Hydraulic Assist
6473-256, Cover Lift, ULTRALIFT Undermount (mounts to bottom of spa)

6473-280, Cover Lift, ULTRALIFT Drop-Behind

6473-281, Mounting Posts for cover lifts 6473-255, 6473-214, or 6473-280; Eliminates the need to drill into cabinets

Older Cover Lift Components

1a. 6000-805, Pivot Arm; See Note 1
1b. 6000-525, Pivot Arm; Fits cover 6473-237
2. 6000-810, Screw Kit
3. 6000-457, Mount Bracket, Left, CoverMate I (Not shown)
4. 6000-458, Mount Bracket, Right, CoverMate I (Not shown)
Note 1: Part is universal for all CoverMate I lifts.
Note 2: Unlisted components are not available as service parts for CoverMate I.

CoverMate III Components
1A. 6000-803, LIMITED STOCK Pivot Arm 31” with Stop
1B. 6000-801, LIMITED STOCK Pivot Arm 38” with Stop for J-400 models except J-495
2. 6000-808, Screw kit
3a. 6000-812, Shock
3b. 6000-485, Shock, Locking
6000-453, Support arm: Left, CoverMate III (Not shown)
6000-454, Support arm: Right, CoverMate III (Not shown)
Unlisted components are not available as service parts for CoverMate III.

Cover Lift Shim Kit (For ProFinish™ Cabinets)
6473-211, Kit; Shim, Cover Lift J-300 2020+ / J-400 2019+

Replacement Cover Clip Kits

6475-000, Ideal Spa Cover Clip Kit (Includes 4 Black Clips and Hardware – For Ideal Covers Only)
6475-004, SunStar Spa Cover Clip Kit (Includes 4 Black Clips, 2 Keys and Hardware – For SunStar Covers Only)
400000-1, Play Series cover clip kit (Contains clips and keys).

Frog @ease Holder
6473-316, Kit: Aftermarket Frog @ease holder. Fits 2021+ JLX, 2016+ J400 &
J-300, 2015+ J-500, 2023+ J-200. Contains holder and instructions.
6473-294, Mineral; Ease system, box (not shown)
6473-295, Mineral; Ease Smartchlor, 3pk (not shown)
6473-333, Frog @ease Holder, floating

ProLink™ Remote Monitoring System Kit

2473-000, ProLink™ Remote Monitoring System Kit (Complete);
This kit includes the following components:
6600-278 WiFi Controller (shown), Installation Instructions (not shown), Mounting
Screws (not shown) and Cable Zip Ties (not shown)
Note: The ProLink™ Remote Monitoring System kit is factory installed as standard equipment on all 2015-2017 J-500 series hot tubs. It is also offered as a factory installed option on all 2016-2017 J-400, and J-300 series hot tubs but can also be installed as an aftermarket accessory on these models after delivery. This kit it is not compatible with 2015 and previous J-400, J-300, series hot tubs. Replaced on North American models by SmartTub™ System on 2018+ spas.

SmartTub™ Controllers

(North American Models only 2018-2019, North American and Export models 2020+)
(NOT Interchangeable with Prior ProLink™ Systems)
6000-487, SmartTub™ North American Kit: Aftermarket, Complete.
Includes 6600-553, 6600-299, and 6560-381.
6000-487E, SmartTub™ Export Kit: Aftermarket, Complete . Includes 6600-554, 6600-299, and 6560-381.*

1a. 6600-554, Controller: IoT, 23 Model LTE/BLE Export. Replaces 6600-285.
1b. 6600-285, Controller: IoT with current sensor (Standard on 2018-9/2020 60Hz J-500, Optional for 2018-9/2020 60Hz J-400, J-300, and J-200, used on all eligible 2020+ 50Hz models.) Replaced by 6600-554.
1c. 6600-553, Controller: IoT, 23 Model LTE/BLE, 60Hz North American models only. Replacement for 6600-521.
1d. 6600-521, Controller: IoT, 4G/LTE Model, 10/2020+ 60Hz models only. Replaced by 6600-553.
6600-299, Sensor: Current for SmartTub controller.*
3a. 6600-308, Controller: Translator, Balboa (Standard on J-500, Optional
on J-400, J-300, J-200 2018-6/2021). replaced by 6560-381.
3b. 6560-381, Adapter; Control to IoT, standard on SmartTub equipped models and kits made after 6/7/2021. If used on earlier models that originally had a translator, you must contact technical support for software update.
6560-266, Booster antenna, SmartTub, 12.5ft cable & SMA Male
6560-267, Cable: Extension 15ft RG58 with SMA M/F
6472-963, Antenna: Board connector
6600-508, Controller: IoT SmartTub™ 3-Phase adapter for 50Hz Export units
*3-Phase adapter not included. Must be ordered separately for 50Hz Export models when necessary.

**ProLink™ & SmartTub™ Availability Chart***

ProLink™

*Note: A SmartTub kit can be installed as an aftermarket accessory on any spa compatible with either SmartTub or ProLink, whether the spa originally came with the option or not. Installation of SmartTub on a spa originally equipped with ProLink requires complete kit 6000-487, as there are no interchangeable components between ProLink and SmartTub. A ProLink kit can be installed on any SmartTub compatible spa (EXCEPT 2018+ J-200/J-100 models) for instances where SmartTub is not a good fit for a consumer, such as areas with poor cellular service, using kit 2473-000.

6570-290, Mount: WiFi for 10/17-2018 J-445 Models Only
6570-291, Mount: Wiring Clamp for 10/17-2018 J-445 Models Only (Not Shown)
6570-373, Mount: IoT Molded for 10/17-2018 J445 Models Only (Not Shown)

Exterior Light Kits
6473-213, Aftermarket exterior light kit, for 2019+ J-435, J-445, J-475, J-485, and 2020+ J-425, and J-495 models. Contains all 4 corner lights and associated hardware.
6473-217, Aftermarket exterior light kit, for 2020+ J-300 models. Contains all 4 corner lights and associated hardware.