Ningbo Cstar Imp Exp EL204 Bluetooth Earbuds with Charging Case User Manual

Ningbo Cstar Imp Exp EL204 Bluetooth Earbuds with Charging

ACCESSORIES

Wooden Charging Case SML Ear tips  Type-C USB Charging Cable

INSTRUCTIONS

• Power ON – Long press the power button(play pause key), White light flashing

• Turn OFF – Long press the power button(play pause key).

• Automatically turn off Earbuds – If no connection after turning on, earbuds will turn off after 3 minutes.

Bluetooth Pairing

The earbuds will automatically pair each other than be ready to connect with Bluetooth mobile phone once the charging case is opened(Pairing: White LED flashing quickly. Completed pairing: One earbud will flash white, another earbud’s LED will be off).

• Pair with Phones
  • Earbuds will be ready to connect with a mobile phone after L & R earbuds are paired. Successfully pair automatically. Click on the Wooden TWS Earbuds pair name “EL204”.
  • If L & R earbud fail to pair, put both earbuds back to the charging case and close the charging case then repeat the Bluetooth pairing process again.
  • After earbuds entered the pairing mode if no operation for 10 minutes then earphones will automatically turn off.
• Phone Call Mode
  • Rejecting a call – Long press on function button for two seconds. Answering a Call/ Ending a Call – Double-tap on the function button.
• Music Mode
  • Previous song – Long press on left function button for two seconds. Next song – Long press on right function button for two seconds.
• Voice Assistant
  • Pause/ Play- Triple tap on function button.
• Charging the Earbuds
  • Charging – White LED flashes slowly. Fully charged – White LED goes off.
• Charging the Charging Case(including Type-C USB Charging Cable)
  • While charging – LED in Red.
  • Fully charged – LED in White.
  • Fully charged – LED in White.
• Earbuds Parameters
  • Model: CT04027
  • Item No. : EL204
  • Battery capacity : 2 x 50mAh
  • Input: DC 5V/ 40mA
  • Playtime: upto 3.5 hours
  • Charging time: approx 1.5 hours
  • Operation distance: 1Om
• Charging Case Parameters
  • Wireless input function
  • Size : 53 x 32 x 40.5mm
  • Weight: 39.3g
  • Charging port: Type-C USB Charging Cable
  • Input: DC 5V/ 200mA
  • Charging case capacity: 240mAh
  • Charging time: approx 1.5 hours

Safety Instructions

1. To avoid hearing damage, keep the volume at a moderate level. To avoid hearing damage, keep the volume at a moderate level. cause permanent damage or hearing loss.
2. Do not use earbuds when driving, cycling, crossing the road etc, which distracts your attention.
3. Do not disassemble or modify the earbuds/charging case by any reason, otherwise, it may cause malfunction and damages.
4. Keep the earbuds/charging case dry, any water or moisture will cause serious damage to the product .
5. Do not place earbuds/charging case in a location exposed to the sun or high temperatures. High temperatures can shorten the life of electronic components, damage to batteries and deform some plastic parts etc.
6. Do not place earbuds/charging case in a cold place to avoid Do not place earbuds/charging case in a cold place to avoid
7. Avoid using earbuds/charging case indicators near the eyes of children or animals.
8. Do not use earbuds/charging cases under extreme weather conditions such as heat, rain, snow, thunderstorm, etc. For example, thunderstorms can cause the device to malfunction example, thunderstorms can cause the device to malfunction
9. example, thunderstorms can cause the device to malfunction example, thunderstorms can cause the device to malfunction in the charging case, so as not to damage the internal circuit.

charging case, so as not to damage the internal circuit. explosion hazard.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation subject to the following two conditions:-

1. This device may not cause harmful interference; and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. Warning: Changes or modifications not expressly approved
4. Warning: Changes or modifications not expressly approved authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>