ADDASOUND INSPIRE16, INSPIRE16PRO Professional Wireless Headset User Guide

ADDASOUND INSPIRE16, INSPIRE16PRO Professional Wireless Headset

Overview

1. Call Answer/End & Play/Pause
2. Power ON/OFF & Bluetooth Pairing & Mute
3. Volume –
4. Volume +
5. USB-C Charge Port
6. LED Indicator
7. Bluetooth Adapter
8. Bluetooth Adapter Button
9. USB Cable

Function and Buttons

Wearing Instruction

• INSPIRE 16 or INSPIRE16PRO can be worn on the left or right. And you can adjust it to a comfortable fit.
• Please make sure to position the microphone 1 or 2 fingers away from your mouth.

Installation Instruction

Turn on/off the headset

• Press and hold Power ON/OFF button (#2) for 3 seconds to turn the headset on or off.
• You hear “power on” and battery level and the LED indicator (#6) will light up blue for 3 seconds when it turns on.
• You hear “power off” and battery level and the LED indicator (#6) will light up red for 3 seconds when it turns off.
• The headset will turn off automatically if there is no Bluetooth connection in 5 minutes.

Connect to power and charge the headset

• Plug the USB cable (#9) to USB-C charge port (#5) of the headset, and then, connect the other end of the USB cable (#9) into any USB port on your PC or USB power adapter (not included) to charge battery.
• The LED indicator (#6) shows the following colors in different battery levels when the headset is being charged.

LED Indicator/ Battery Status

• Solid blue: Battery high
• Solid blue and red: Battery medium
• Solid red: Battery low

The LED indicator (#6) flashes red color when the battery is low. It takes approximately 3 hours to charge the battery and the LED indicator (#6) turns off automatically when the headset is fully charged.

Connect to Bluetooth-enabled mobile devices

• Press and hold Power ON/OFF button (#2) for 4 seconds to turn the headset on and begin pairing the mobilephone.
• You hear “pairing” and the LED indicator (#6) flashes blue and red.
• Enable Bluetooth on your phone and search for Bluetooth devices.
• Select “INSPIRE 16 or INSPIRE 16PRO” as Bluetooth device.
• When pairing is successful, you hear “Your phone is connected.”
• The headset will connect with the last successfully connected Bluetooth device automatically.

Connect to PC using Bluetooth adapter

• Turn the headset on and plug Bluetooth adapter (#7) into a USB port on your PC.
• Bluetooth adapter (#7) is pre-paired to the headset.
• You hear “connected” when pairing is successful.
• Make sure to set “ADDA BT220” as default recording and playback devices in the sound settings of your PC and softphone.

Connect to PC and mobilephone simultaneously

• Turn the headset on and pair the mobilephone first.
• When pairing is successful, you hear “Your phone is connected.”
• And then, plug Bluetooth adapter (#7) into a USB port on your PC.
• Bluetooth adapter (#7) is pre-paired to the headset.
• You hear “connected” when pairing is successful.
• Now the headset is paired to PC and mobile phone simultaneously.

Connect to PC using USE cable

• Make sure to turn the headset on and then chug the hordeet into a USB port on your AC one.
• Select “INSPIRE 16 or INSPIRE16PRO” as default recording and playback devices in the sound settings of your PC and softphone. Please note your headset is charged at this time.

Usage Instruction

Answer/end or reject a call

• Press the Call Answer/End button (#1) to answer/end a call.
• Double-tap the button (#1) to reject a call.
• Double-tap the button (#1) to redial the last number that was called.
• Call answer/end also work on Skype for Business and Microsoft Teams.

Handle multiple calls

• Press the Call Answer/End button (#1) to answer the incoming call and end the current call.
• Press and hold the button (#1) for 2 seconds to reject the incoming call and continue the current call.
• Double-tap the button (#1) to answer the incoming call and hold the current call, and then, double-tap the button (#1) to switch between active and held call.

Mute/unmute the microphone

• Press the Power ON/OFF button (#2) to mute the microphone when on a call.
• You hear “mute on” and the LED indicator (#6) shows solid red.
• Press the Power ON/OFF button (#2) to unmute the microphone when on a call.
• You hear “mute off” and the LED indicator (#6) shows solid blue.

Adjust the volume

• Press the volume + (#4) button to increase the volume.
• Press the volume – (#3) button to decrease the volume.

Play pause music

• Press the Call Answer/End button (#1) to pause music when listening to music.
• Press the Call Answer/End button (#1) to play music.

Activate the voice assistant on your mobile phone

• Press and hold the button for 1 second to activate the voice assistant on you mobilephone when not on a call.

Activate voice prompt

• Voice prompt will be activated automatically when the headset is powered on.

Trouble Shooting

The Bluetooth headset can’t be paired with PC

• Make sure to choose “ADDA BT220” as default recording and playback devices in the sound settings of your PC and softphone.
• Re-plug the Bluetooth adapter.

The headset does not work when it connects to PC using USB cable

• Please make sure the headset is switched on first before it is connected to PC.
• Also choose “INSPIRE 16” or “INSPIRE 16PRO” as default recording and playback devices in the sound settings of your PC and softphone.

The headset has been paired successfully but has intermittent sound

• Please note some factors like obstacles, signal strength and wireless congestion may affect the sound signal transmission.

Usage Attention

• Make sure to store the headset when it is powered off.
• The headset is not waterproof. Don’t put it in humid environments.
• Extreme temperatures may affect the battery life and performance.

Accessories

Limited Warranty

• ADDASOUND offers a two-year limited warranty. Please visit our website for more warranty details: www.addasound.com.

RED Compliance Information

1. RF information:
   • Bluetooth: 2402-2480MHz
   • Headset Max power: 1.99dBm
   • Dongle Max power: 3.96dBm
   • Battery: 280mAh,3.7V,4.2V
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
3. Charger description: The product does not come with a charger as standard. It is recommended that the user can use the charger specification (5V 1A charger);The maximum operating temperature of the product, please refer to: Ideal temperatures: 0°C to 45°C for operating.
4. Products can be used throughout the EU.

FCC STATEMENT

1. INSPIRE 16FCC ID: 2AHSPINSPIRE16
   • BT210 FCC ID: 2AHSPBT210
   • BT220 FCC ID: 2AHSPBT210
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
3. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
5. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   • Reorient or relocate the receiving antenna.
   • Increase the separation between the equipment and receiver.
   • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   • Consult the dealer or an experienced radio/TV technician for help.
   • This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
6. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ADDASOUND DENMARK A/S

All rights reserved.
ADDASOUND® is a registered trademark of ADDASOUND DENMARK A/S.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc..
All other trademarks are the property of their respective owners.
Designed and Engineered in Denmark
Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>