Ningbo Cstar Imp Exp 7197-67BK Outdoor Speaker with RGB Lights User Guide
- June 5, 2024
- Ningbo Cstar Imp Exp
Table of Contents
Ningbo Cstar Imp Exp 7197-67BK Outdoor Speaker with RGB Lights
What’s in the box?
Bluetooth speaker*1
Type C charging cable*1
|
Instruction*1
Product Features
- Light key
- Volume”-“/Previous song
- Volume”+” / Next song
- On/Off/Audio/Play/Pause
- Charging indicator
- Charging Port
- Micro SD card (TH card)
- Reset key
Bluetooth
Bluetooth connection
-
1.
Preess and hold: Turn on speaker and Enter pairing mode.
LED indicator is blinking if Bluetooth device is not connected.
Use thr Bluetooth device to search for “Movie max BT speaker” and click to connect.
Short press x2: Audio switch mode
Short press x3: Start/Close Siri -
– & +
Short press two buttons at the same time:
Disconnect the Bluetooth.
Light mode
Short Press: Switch light effect
Double press: Lighting on/off
Long press 5s: Activate/Deactivate alarm (SOS features)
Music controls
_/+
ShortPress: Volume “-“/”+”
Press and hold: Previous/Next song
Song Press: Play/Pause
Answer the phone
Short Press: Answer/Hang up
Press and hold: Reject a call
Audio connetion
Double press; Audio switch mode
When an audio device is inserted, it will play the last inserted one first.
Product charge
Red light ON: The battery is charging.
Red light OFF: Fully charged.
To preserve battery lifespan, fully charge at least once every 45 days.
Specifications
Model | 7197-67BK |
---|---|
Product size | 1607850.5mm |
Bluetooth distance | ≥10m(free field) |
Playing time | 6 hours (max Volume with LED indicator on) |
7.5 hours (max Volume with LED indicator off)
Play mode| BT/Micro SD card (TF card)
Battery| 1500mAh/3.7V
Charging Input| DC 5V/1A
Charging time| 2,5H (battery status empty)
Distortion rate| THD<10%
Frequency response| 20Hz-20Hz
The horn| 50 mm
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Waming: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authoriey to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television -reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or reloc.ate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction