BMK BLUEMICKEY EPA1205 5A Smart Battery Charger User Manual
- June 10, 2024
- BMK BLUEMICKEY
Table of Contents
BMK BLUEMICKEY EPA1205 5A Smart Battery Charger
INTRODUCTION
The only authorized supplier of genuine BMK BLUEMICKEY items (other than Amazon) on the Amazon platform is BMK, who is registered with the USPTO in the United States. We are a top independent distributor for the automotive and electrical industries that focuses on all types of vehicle accessories. Our advantages include a more efficient supply chain, quicker deliveries, and affordable products.
SPECIFICATIONS
- Brand: BMK BLUEMICKEY
- Model: EPA1205
- Item Weight: 15.9 ounces
- Package Dimensions: 5 x 4.5 x 2.9 inches
- Is Discontinued By Manufacturer: No
- Bulb Type: LED
- Special Features: Emergency light portable electronics devices battery charger
- Amperage: 5 Amps
- Voltage: 12 Volts
- Wattage: 60 watts
- Input Voltage: 100~240 Volts AC 50/60Hz
- Input Current: 5Amp (RMS) @ 220 Volts AC
- Back Current Drain: 3mA
- Ripple Current: <=0.12Amp (RMS)
- Bulk Charge Current: 0 Amps
- Starting Volatge: 5 Volts
- Charge Voltage Rating: 12 Volts; Bulk Limited Voltage: 14.7 Volts
- Operate Temperature: -5~120°F
- Package Size: 90 x 2.78 x 2.20 inches
- Battery Capacity: 12~100Ah batteries
- Battery Type: All types of 12 Volts AGM, GEL, Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries
WHAT’S IN THE BOX
- 1 x Charger (Power Cord: 5.57ft.)
- 1 x Clip Connector (2ft.)
- 1 x O-Ring Connector (2ft) with 10 Amps fuse
- 1 x User Manual
DESCRIPTION
FIRST STAGE – DIAGNOSTIC
- Battery Desulfation Using 18V Pulse
- Although 12-100Ah can be used with the charger, 12-60Ah is strongly advised for improved efficiency and battery safety.
SECOND STAGE: BULK CHARGE
- charging at the highest rate till 80% of the capacity
- Featuring an LED to display the various charging modes
- Based on feedback from the organic battery, modify the charging procedure.
THIRD STAGE: ABSORPTION
- Absorption, Until Maximum
- When the battery is fully charged, the output voltage is restricted to 14.7V while the current decreases.
- Internal battery chemistry needs to be stabilized for improved performance and longevity.
FOURTH STAGE: MAINTENANCE
- Battery Float and Maintenance Using Pulse Charging
- At this point, the battery is fully charged.
- Reduce energy use when full power is not required.
IMPLICIT BATTERIES ARE DETECTED
- Reversed Polarity: The Flashing Fault Light
- The defective Battery has the Fault Light On.
SPARK PROOF
- Avoid sparks.
- Before turning on, automatically verify that the connection is secure.
HARNESS QUICKLY DISCONNECTED
- Within seconds, connect and disconnect from the battery.
72-HOURS OF SECURITY FEATURE
- Upgraded 72 Hour Safety Timer to start whenever the charger is on to prevent overcharging of weak batteries
FEATURES
-
FAST-CHARGING CAR BATTERY BOOSTER WITH UPGRADED DEFECTIVE BATTERY DETECT
updated to diagnose battery health in order to find a bad battery before charging it. With an input range of 100-240V AC and a 5A DC output current, the BMK 12V 5A automobile battery charger can charge batteries ranging in capacity from 15 to 100Ah. Please make sure the battery capacity is greater than 15Ah in order to better tender the battery. It can also charge batteries with a capacity greater than 100Ah, however charging will take longer. ETL Certified for Safety and Performance -
BATTERY RESCUE & RECOVER – UPGRADED 72-HOUR SAFETY FEATURES/MULTI-SAFETY PROTECTIONS
Updated with a 72-hour safety function that kicks in whenever the charger is turned on to prevent overcharging of weak batteries. made of high-quality ABS, equipped with Constant Pulse Current Maintenance to prevent overcharging and discharge, as well as many short-circuit, overload, overvoltage, and polarity reverse protections; Full-loaded and burn-in tests demonstrate the device’s high dependability and consistent functioning.
-
BOAT BATTERY CHARGER WITH 4-STAGE SMART CHARGING AND FULL AUTOMATIC MODE
A 12V smart charger uses an MCU controller to function in 4 stages of automatic charging, using a percentage to indicate the amount of electricity used and to track the charging process as a whole. When the battery is fully charged, stop automatically. An LED indicator is used to show the marine battery charger’s various charging statuses. -
A 10A FUSE WAS ADDED TO THE RING CONNECTORS, AND THE DEEP CYCLE BATTERY CHARGER WAS MULTI-PURPOSE
A great option for a lawnmower, boat, car, motorcycle, electric vehicle, electric tools, and emergency battery charging, the BMK battery maintainer charger operates with a vulcanization function and is a Pb/SLA/VRLA/GEL/AGM lead acid battery charger tender. It is lightweight (15.87 oz), making it portable, and can also be used as a trickle battery charger. -
QUALIFIED INSURANCE AND PROMPT SERVICE
To fulfill customers’ demands better and promptly provide after-sale services, BMK is committed to offering boat battery trickle chargers of the highest quality. This commitment will allay any concerns you may have about purchasing this trolling motor battery charger. Purchase your Automotive Car Battery Charger Maintainer with confidence, and get in touch with us if you encounter any issues with the product.
Note:
Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are traveling. Before buying, kindly verify compatibility.
FREQUENTLY ASKED QUESTIONS
What types of batteries can be charged with the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The BMK BLUEMICKEY EPA1205 5A Smart Battery Charger can charge all types of 12 Volts AGM, GEL, Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries.
What is the input voltage for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The input voltage for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is 100~240 Volts AC 50/60Hz.
What is the amperage of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The amperage of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is 5 Amps.
What is the wattage of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The wattage of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is 60 watts.
What is the starting voltage for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The starting voltage for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is 5 Volts.
What is the charge voltage rating for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The charge voltage rating for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is 12 Volts; Bulk Limited Voltage: 14.7 Volts.
What is the temperature range for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The temperature range for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is -5~120°F.
What are the four stages of charging for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The four stages of charging for the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger are Diagnostic, Bulk Charge, Absorption, and Maintenance.
What types of batteries can be charged with the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The BMK BLUEMICKEY EPA1205 5A Smart Battery Charger can charge all types of 12 Volts AGM, GEL, Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries.
What is the safety feature of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger?****
The safety feature of the BMK BLUEMICKEY EPA1205 5A Smart Battery Charger is an upgraded 72-hour safety timer that starts whenever the charger is on to prevent overcharging of weak batteries.
What types of batteries can the BMK BLUEMICKEY EPA1205 charger handle?****
The BMK BLUEMICKEY EPA1205 charger is designed to charge and maintain various types of 12V lead-acid batteries, including wet, gel, and AGM (Absorbent Glass Mat) batteries. It is not suitable for lithium-ion batteries.
What is the charging current of the BMK BLUEMICKEY EPA1205 charger?****
The charger has a maximum charging current of 5 amps (5A). It offers a versatile charging range, allowing you to select charging rates between 0.75A and 5A.
Can the charger be used to charge multiple batteries simultaneously?****
No, the BMK BLUEMICKEY EPA1205 charger is designed to charge a single battery at a time. It is not meant for charging multiple batteries simultaneously.
Does the charger have built-in safety features?****
Yes, the BMK BLUEMICKEY EPA1205 charger incorporates several safety features to protect both the battery and the charger itself. It includes protection against reverse polarity, overcharging, over-voltage, short circuits, and overheating. These safety features help ensure safe and reliable charging.
Video – Product Overview
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>