Nokta Pointer Waterproof Pinpointer Metal Detector User Manual
- June 10, 2024
- Nokta Pointer
Table of Contents
Nokta Pointer Waterproof Pinpointer Metal Detector User Manual
Device Introduction
IP Rating: IP67 – Dust resistant and waterproof up to 1 meter depth.
WARNING! Wash the pointer with tap water after using it in salty water.
Do not use any chemicals for cleaning and/or for any other purposes.
Never insert any hard or sharp objects into the buzzer hole.
Battery Installation
A) To install the battery, twist and remove the fastener marked with number 1.
B) To remove the control unit marked with number 2 from the device, pull
WITHOUT TWISTING.
C) Insert the battery facing downwards paying attention to plus (+) and minus
(-) poles. The device will not work if the battery is not installed correctly.
D) To mount the control unit (2) back on the device, align the contact pins
and the notches marked with number 3 and push to snap in. DO NOT TWIST THE
CONTROL UNIT!
E) Twist the fastener (1) and do not leave it loose to secure a water tight
seal.
Lost Alarm & Auto-Shut Off After 5 minutes of inactivity, the pinpointed will emit an audible alarm and LED will start flashing. After 5 minutes of alarm, the device will shut off automatically to save battery life.
Detection Tip Nokta Pointer’s detection area is between the tip and the hand grip. The coil provides 360° detection. This helps you to locate targets quickly and easily in the hole. If you hold the device horizontally, you can scan a larger area. This allows you to cover a broader area to quickly reach your target.
LED Flashlight Press the green and gray buttons simultaneously to turn it on, press again to turn off. Nokta Pointer will start at the same setting at start up.
Low Battery Indicator When the battery is low, Nokta Pointer will give 5
short-long beeps at start up. The device may continue to work for a short
period of time.
Replaceable Hard-Shell Cases Nokta Pointer comes with two hard-shell cases.
One of the cases is also designed to allow for digging.
Coil Interference Blocking When it is switched off, it disconnects the coil’s magnetic transmission and eliminates interference with another metal detector. This also prevents the device from being detected as a target.
Usage
When a target is detected, Nokta Pointer will produce an audio and/or
vibration alert. The rate of the pulsing audio or vibrations will increase as
it gets closer to the target and it will decrease as it is moved away.
TECHNICAL SPECIFICATIONS
Working Frequency : 18.2 kHz
Metal Detection : Audio and/or vibration alert
Sensitivity : User adjustable
Auto-Shut Off : Yes
Coil Interference Blocking : Yes
Dimensions : 24 x 4.8 x 4.8cm (9.4” x 1.9” x 1.9”) (including the hard-shell
digger case)
Detection Tip : 9.3cm ( 3.7”)
Weight : 235gr (8.3oz) (including the battery and hard-shell digger case)
Working Temperature : -20°C/+50°C (-4°F/+122°F)
Battery : 9V Alkaline Battery
Battery Life : Up to 30 Hours