UMIDIGI A11 6.53-Inch HD+ Full Screen Smartphone Instruction Manual

UMIDIGI A11
Tanks for choosing UMIDIGI products

Building a great phone is hard enough, so building a great phone on a budget should be infinitely more difficult. Big thanks to all who made this superphone super awesome by contributing valuable time and developing hardware, software & other developments. Thanks for choosing UMIDIGI products, thanks to your support our value can be realized and we can constantly move forward to create smart devices with a better user experience. www.umidigi.com
Scan following QR-codes to follow us and enter the giveaway to win a UMIDIGI smart device for free!

|
---|---
https://vk.com/umidigi| http://youtube.com/umidigi/
|
https://www.facebook.com/Umidigi| https://twitter.com/umidigi
https://www.instagram.com/umidigi

PRODUCT HEX-VISION IMAGE

POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shut down or turn on the screen.

VOLUME BUTTON: Short press to adjust the volume or to mute incoming calls.

CARD INSERT MANUAL

Insert Nano-SIM Card
Please face the chip side of the Nano-SIM card adown when inserting into the slot. Be aware of the direction of the cut edge when placing the Nano-SIM card Into the slot.

Reminder:
Please use a standard Nano-SIM card. Please don’t use a non­standard card that is hand-cut, in order to prevent the SIM slot and card tray from being damaged and card-rejection situation that may cause damage to the phone.

TF Card Installation

Please place the metal contact of the TF card adown, be aware of the direction of the cut edge. Place the card onto the tray and insert it into the device.

Reminder:
Please turn off the phone before changing or replacing the TF card.TF card does not come with the phone, please purchase separately.
Please do not plug in and out of the SIM card tray when the phone is on. Be careful when using the slot thimble from scratching the phone.

DUAL – SIM MANAGEMENT

Please choose which SIM card slot to be the main one to be for the 4G network via Setting > SIM Card. Choose your preferred network types of 4G/3G12G via Setting>Network&Internet>Mobite network >Preferred network type

FINGERPRINT IDENTIFICATION

You can unlock the screen by fingerprint ID function.
Click Setting>Security&Location>Fingerprint, please enter your fingerprint information by following the in structions on the screen.

Reminder:
Please ensure your finger is clean and dry when giving your fingerprint information to the phone.
Please enter the information of your finger pulp for fingerprint information. When unlocking the phone by fingerprint, please place your finger pulp on the Touch ID sensor for about a second.

NETWORK CONNECTION

Connecting WLAN
Into the setting of WLAN via Settings>Nehvork&Intemet>W1-Fi When WLAN is on, a list of available WiFi connections will appear. Click on the one you want to connect to, enter the password if the network is encrypted, then click Connect. When it’s a public network, just click Connect When the network shows “connected”, it is available to use

Bluetooth Function
Into the setting of Bluetooth function via Settings>Connected devices>Bluetooth Enable the Bluetooth function by clicking the Menu Button then select ‘Refresh”, then the phone will search for available Bluetooth devices for pairing and list on the screen. Click on the one you want to pair with, then click ‘Pair” on the dialog pop-up. Documents are available for transmission after Bluetooth pairing.

Reminder:
Slide down the status bar twice to open the shortcut switches for Bluetooth and other functions.

WLAN Hot-spot Setting
Click on via Settings>Network&Internet>Hotspot&tethering >Wi-Fi hotspot to turn on the Portable WLAN Hot-spot function. When setting up the WLAN hot- spot, enter your user name in “Network Name” and password, then click Save. Another device can use the WLAN hot-spot by searching and entering the password of the password.

Reminder:
Please enable the Data Connection before enabling the network sharing function. Your mobile traffic will be shared by other devices, so please use it carefully. The signal of the WLAN hot-spot depends on the signal strength and devices

CAMERA

Aim the camera at the shooting object, the phone will start focus automatically; or you can click on the screen to choose the object you want to focus on, then click the “Capture” icon to take photos. You can also choose other modes such as video recording, beautifying, panorama to lake photos/videos.

INSTRUCTIONS FOR DUAL – CARD STANDBY

“Dual card, dual standby, single-pass” means you can insert two SIM cards and have them both ‘standby”, but cannot make phone calls at the same time. During the standby mode, both cards are available for receiving phone calls, but once one of the cards is activated, the other one cannot receive phone calls or make phone calls.

SECURITY INFORMATION

Security information (including BS, ES, battery security information) of third-party software installation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.

Please prevent the device or the battery in extreme cold/hot conditions. The extreme temperature will lead to the deformation of the phone and reduce the charging capacity and battery life.

Please only use the custom-designed and approved battery and recharger by UMIDIGI. An incompatible battery and recharger may cause damage to the phone. Please abide by local regulations when disposing of the used batteries and phones.

Please do not place the battery or the phone onto or inside heating devices such as microwave, oven, or radiator. The battery may explode if it gets too hot.
Please do not crush or pierce the battery. Prevent the battery from getting high pressure from outside, it may cause internal short and overheat

Specifications

BASIC INFORMATION

Display

Cameras

Connection (I/o).

Band| LTE FDD:B2/5/7
LTE TDD: B38/40/41
WCDMA: B2/5
GSM: B2/5
---|---
SIM/TF card| 2 Nano SIM Card and 1 TF Card
WIFI| IEEE802.11 a/b/g/n/ac
Bluetooth| Bluetooth 5.0
GPS| Build in GPS/Glonass/Beidou
FM| Yes
Earphone Port| 3.5mm
USB Port| Type-C USB

Other Features

In the box

Phone xl

Type-C cable xl
Power Adapter xl
User Menu xl
phone case xl

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning
Operation of 5150-5250 MHz is restricted to indoor use only.
This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions:

• this device may not cause interference, and
• this device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC/ISEDC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, tests for each phone are performed in positions and locations as required by the FCC/ISEDC.
For body-worn operation, this model phone has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

VK: vk.com/umidigi
YouTube: youtube.com/umidigi
Facebook: facebook.com/Umidigi 
Twitter: twitter.com/umidigi 
Instagram: instagram.com/umidigi

UMIDIGI is registered trademark by
Shenzhen Youmi Intelligent Technology Co., Ltd.
All other trademarks are the property of their respective owner.
Visit www.umidigi.com for more information

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>