kogan EH7520 24 Inch Smart HD LED TV User Guide
- June 6, 2024
- Kogan
Table of Contents
kogan EH7520 24 Inch Smart HD LED TV
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating in the literature accompanying the appliance.
Warning
The lightning flash with arrowhead symbol within an equilateral triangle,is in
tended to alert the user to the presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
High, voltage are used in the operation of this product to reduce the risk of
elect shock,do not remove cover of the cabinet, refer servicing to qualified
service personal.
If the TV any changes or coarse adjustment, electric shocks to be hurt, do not
attempt to open a machine-maintenance, customer contact centres needed
overhaul.
IMPORTANT SAFETY PRECAUTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings
- Follow all instructions.
- Do not use his apparatus near water
- Clean only with dry doth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at Plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments /accessories specified by the manufacturer.
- Use only with the cart, stand,tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used caution when moving the cart/apparatus combination to avoid injury tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time. Caution:
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- The mains plug is used as disconnect device,the disconnect devices hall remain readily operable.
- The socket-out shall be installed near the equipment and shall be easily accessible.
- This product should never be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacture’s instructions have been adhered to.
- The apparatus shall not be exposed to dripping or splashing and that no objects filed with liquid, such as vases, shall be placed on the apparatus.
- Do not place any sources of danger on the apparatus(e.g.liquid filled objects, lighted candles).
- Wall or Ceiling Mounting-The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.
- Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight.To prevent the spread of fire,keep candles or other flames away from the TV, remote control and batteries at all times.
- The USB terminal should be loaded with 0.5A under normal operation. These servicing instructions are for use by qualified service personnel only.To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions. unless you are qualified to do so.
- The battery shall not be exposed to excessive heat such as sunshine,fire or the like.
- This equipment is a Class Il or double insulated electrical appliance.It has been designed in such a way that it does not require a safety connection to electrical earth
- The maximum using environment temperature is 45 degrees. The Maximum using altitude is 2000 meters
COMPONENTS
A Kogan 24” SMAR T HD LED TV
B Remote control
C Stand (x2)
D AAA battery (x2)
E Quick-start guide
F Warranty card
NOT INCLUDED
Phillips head screwdriver, antenna cable, broadband internet connection.
TV BUTTONS AND TERMINAL INTERFACE
Note: The following is only a functional schematic, And the actual position and arrangement of different models may be different.
Terminal Interface
Note: The following are the various terminal interface,the actual
position and arrangement, the number of different models may be different.
EXTERNAL DEVICE CONNECTION DIAGRAM
TV INSTALL AND CONNECT
Set your TV
To put your TV on a firm place which can bear the weight of the TV.
To avoid danger, please don’t positions the TV near water or heating place
(such as light, candle, heating machine),do not block the ventilation at the
back of TV.
Connect antenna and power
-
Connect the antenna cable to the antenna socket on the back of the TV.
-
To plug the power cord of TV (AC 12V,3A)
Turn on TV -
Connect the power supply, enter the standby mode (red light), press the power button of the TV or the power button on the remote control to turn on the TV
Note: Picture for reference purposes only.
TV STAND INSTALLATION INSTRUCTIONS
- Open the carton and remove the TV and scattered accessories and base (some models without base).
- In order to avoid damaging the TV, please cover it with soft mattress, put it on the table, face down on the soft material and screw the neck of the base to the TV.
- Screw the base and connected to the TV.
- The installation is complete.
Note : Picture for reference purposes only. Please prevail in kind
REMOTE CONTROL OVERVIEW
INITIAL INSTALLATION
The first time you switch your TV on, it will automatically be in the initial setup mode. This will guide you through the whole setup process of selecting your desired language, connecting to the internet, signing in to your account and tuning in TV channels.
Language select
- Press ▲▼ the buttons to highlight your desired OSD language then press the OK button.
- Data Cllecteon and Fimware Upootes Notice page will appear, Press the ▲▼ buttons to select the menu option.
VIEW ADDITIONAL DETAILS
Go to view more detailed firmware/ software network download update
instructions.
ACCEPT
Accept all agreements and agree to the firmware / software network to
automatically downlod updates
- If you select VIEW ADDITIONAL DETAILS, the detailed frmware / software network download update instructions will display. Initially, the default focus will be on the text description section.
- Press ▲▼ the buttons will drop the text to the bottom.
- Press the ▼ buttons, ACCEPT ALL will highlight.
- Press the ▲▼ buttons then the OK button to confirm the selection.
ACCEPT ALL
Accept all pocol sections and agree to the frmware/software network to
automaticlly download updates.
ACCEPT AUTOMATIC UPDATES
Accept all protocol parts and manually select whether to agree to the
frmware/software network download update if there is a frmware/software
update.
ACCEPT USAGE INFORMATION COLLECTION
Suppliers accepting the agreement section collect some non-personal user
information.
DECLINE ALL
Reject all protocols to disable firmware/software network updates.
Press ▲▼ the buttons to select your country where you will operate the TV.
Press the OK button to confirm.
You have 2 options when connecting your TV to the internet. You can connect
wirelessly via Wi-Fi, or connect your TV to your outer directly by connecting
a LAN cable (wired connection).
Choose your connection method and follow these instructions.
Wi-Fi Network
- Press the ▲▼ buttons to highlight Wi-Fi Network then press the OK button. Your TV will automatically scan for your wireless network, then show you a list of networks that its found. Highlight your network and press the OK button.
- Use the buttons to navigate the keypad in the screen to entry your Wi-Fi password, then press the OK button to select the characters. Finally select the and press the OK button. In a second or two your TV will show Success after connection successful.
WIRED Connection
If you have connected your ethernet cable to the LAN socket on the back of
your TV, select Wired Network and the press the OK button. Then select Connect
to start connect to the internet.
SKIP Connection
- If you do not need to connect to the network, select Skip and press the OK button to confirm.
- A pop up menu will display. If you want to go back the network setting page, select Set up Network. If you want to confirm to skip the network setting, select Skip. Then will enter to input Source menu and start TV Tuning.
Press the ▲▼ buttons to select Start Netflix then press the OK button. You will now be asked to sign in to your Netlix account. If you don’t already have an account you can set one up on your TV go to the Join Now’ section.
If you want to temperary skip the Netflix setting, select Skip to enter to
Input Source menu and start TV Tuning.
If you complete Netflix setting, press the EXIT button to leave and press the
button and select Program, then select Auto Tuning for TV tuning.
If you select Skip option in Netflix setting page, then you now need to tuning in your TV so you can watch LIVE TV (broadcast TV). If you watch TV via a Set Top Box you can skip this section by selecting the correct HDMI input source.
DVB-T
- Input Source page shown on the TV, use the ▲▼ buttons to select TV. then press the OK button.
- In DVB Tuning Type page, use the ▲▼ buttons to select DVBT.
- Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found.
- If you want to skip the DTV tuning, press the OK button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. e. Your TV is now setup and ready to watch.
DVB-C
- Input Source page shown on the TV, use the ▲▼ buttons to select TV. then press the OK button.
- In DVB Tuning Type page, use the ▲▼ buttons to select DVBC.
- Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found.
- If you want to skip the tuning, press the OK button to interrupt the tuning half way. A pop-up screen will be displayed, press the. button to select YES to confirm.
- Your TV is now setup and ready to watch.
SETTINGS
DVB-C
- Input Source page shown on the TV, use the ▲▼ buttons to select TV. then press the OK button.
- In DVB Tuning Type page, use the ▲▼ buttons to select DVBC.
- Your TV will now start scanning for all the available TV channels. This operation may take a few minutes. The display will show the progress of the tuning and the number of channels found.
- If you want to skip the tuning, press the OK button to interrupt the tuning half way. A pop-up screen will be displayed, press the. button to select YES to confirm.
- Your TV is now setup and ready to watch.
HOME MENU
- Press the 0 button to display the home menu.
- Use the ▲▼ buttons to switch between the Apps, NE TFLIX, Input, and Settings sections of the Home page.
- Use the buttos to select the desired App, input source or setting, then press the OK button to confirm.
- Press on the remote control. Press button to select the options of Picture, Sound, Setting, Lock, PVR Option, Program, Network, About, etc.
Press to jump to the corresponding sub-option on the right.
HBBTV
- HBBTV (Hybrid broadcast broadband TV) is a service that is offered by certain broadcasters and available only on some digital TV channels. HBBTV delivers interactive television over broadband Internet
- Press on the remote control, select setting > HBBTV and Press to select On or OFF
- To use HBBTV please ensure your TV is connected to Internet and HBBTV is switched ON
Link Setup
- Press on the remote control. select setting>Link Setup and press [OK] to enter .
- Press to select On or Off.
SPECIFICATIONS
TROUBLESHOOTING
Common fixes
Many minor issues can be resolved by hard resetting, or power cycling the unit
or upgrading the firmware.
To perform a hard reset, or power cycle, please use the following steps.
- Unplug it from the main power socket and leave it for 10-15 minutes.
- Press and hold the power button on the TV for 5 seconds.
- Connect the TV back to the power and turn it on.
Poor picture and sound quality
- Try a different channel
- Adjust the antenna
- Check all connections
No picture or sound in TV status
- Try another channel
- Press the TV/AV button
- Make sure TV is plugged in
- Check the antenna connection
No sound or sound is too low at maximum volume
- Check the volume settings on any external speakers connected to your television
- Adjust the TV volume accordingly
- Check another channel or input
- Check that MUTE hasn’t been turned on
Picture rolls vertically
• Check all connections
No colour, wrong colour or tints
- Make sure the program itself is broadcast in colour
- Select the picture menu, then adjust the colour and tint submenus
Blurred or snowy picture, distorted sound
- Check direction, location and connections to your antenna
- Issues may be caused by the use of an indoor antenna (poor signal)
Remote control malfunctions
- Replace remote control batteries
- Check battery terminals
- Remote is out of range, move closer to TV
- Remove any obstructions between remote and IR sensor of TV
- Make sure the power cord to your TV is plugged in and turned on
Image is not centred on the screen
Adjust the horizontal and vertical position
“No Signal” on HDMI source
- Test the device with a different HDMI cable
- Plug the device into another HDMI port
- Try a different device connected to the same cable and port
- Perform a factory reset on your TV
Care & maintenance
Unplug the television from the power supply before cleaning. Do not use any
liquid cleaners or harsh chemicals. Always use a soft, damp cloth.
Cleaning the screen
Wet a soft cloth in a mixture of lukewarm water and a little fabric softener
or dish washing detergent. Wring the cloth until it’s almost dry, and then use
it to wipe the screen.
Make sure the excess water is off the screen, and then let it air-dry before
you turn on your TV.
Cleaning the casing
To remove dirt or dust, wipe the TV casing with a soft, dry, lint-free cloth.
Please be sure not to use a wet cloth.
For our full TV troubleshooting guide, head online to
help.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>