kogan KASMKTOCHBB Double Walled Smart Kettle User Guide
- June 6, 2024
- Kogan
Table of Contents
kogan KASMKTOCHBB Double Walled Smart Kettle
SAFETY & WARNINGS
Ensure to read all warnings and instructions in this user guide prior to first use. Retain for future reference.
- This kettle is not intended for use by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the kettle by person responsible for their safety.
- This kettle is designed for indoor, household use only. Do not use outdoors.
- This kettle contains no user-serviceable parts. If the power cord, kettle, or plug is damaged, stop use immediately and contact help.Kogan.com for assistance.
- Adult supervision is required when the kettle is used around children. Contact with boiling water may cause severe burns.
- CAUTION: Do not operate the power base unless a water-filled kettle is placed upon it.
- Do not overfill the kettle. If the kettle is overfilled, boiling water may be bubble over causing potential injury.
- Ensure the lid is closed during use. Steam released from the kettle may cause scolding bums.
- Do not immerse any part of the appliance in water or other liquid.
- Do not allow the power cord to be exposed to water, heat. direct sunlight, or overhang where it can be pulled to pose a hazard or be damaged.
- Do not use an extension cord with this kettle.
- Do not let the power base come into contact with water or any other liquid.
- Water is the only permitted liquid to be heated in this kettle. Do not place any other liquid or food product into the kettle.
- The power base supplied with the kettle is designed solely for use with this appliance.
- Do not attempt to use this kettle with any other power base or for any other use.
- Always place the power base on a stable, level surface, and out of reach of children.
- Ensure the kettle is turned off and unplugged before cleaning.
- Ensure the kettle is turned off when moving and whenever the kettle is not in use.
- Do not remove the kettle while it is switched on.
- Do not operate the kettle if the amount of water inside is below in the MIN water level line.
- CAUTION: Do not use alkaline cleaning agents when cleaning as this could lead to damage to the kettle.
- WARNING: This kettle contains plasticizers. To prevent plasticizers from migrating to the finish of a countertop or tabletop, place a non-plastic coaster or placemat between the kettle and the surface on which the kettle is placed. Failure to do so may result in permanent blemishes or darkening of the finish.
- The heating element on the power base is subject to residual heat.
OVERVIEW
Display 
BEFORE FIRST USE
Prior to first use, boil a full kettle of water and discard to get rid of
any impurities that may have come from other sources.
OPERATION
-
Press the back end of the lid release button to open the lid of the kettle. Fill the kettle with water until It reaches at least the MIN water level Une (O.SL).
-
Place the kettle on the power base and close the lid.
-
Plug the power base cord Into a power socket and switch It on. The unit will emit an audible sound upon powering on and the display screen will flash, then display the current water temperature in Celsius (°C).
This kettle features two heating modes: ‘Keep warm and ‘Boil’.
Keep warm
The keep warm mode allows users to heat the water to a desired temperature
between 40 – 90°C. The kettle will then maintain the water at that temperature
for up to 2 hours.
- Set the desired temperature by repeatedly pressing the TEMP button . The display will cycle through the available temperatures (40-50-60-70-80-90°C). The button will light up and remain lit until the water is heated to the desired temperature.
- Press the KEEP WARM button . The kettle will heat the water to the desired temperature. The button light up and remain lit whilst the kettle is in this mode.
- The kettle will emit a sound prompt when heating is finished. It will then maintain the water temperature.
- When this mode is used in the future, the kettle will default with the temperature set as the previously desired temperature.
Notes:
- If the temperature of the water is already higher than the desired set temperature, pressing the KEEP WARM button will cause the kettle to maintain the water at the desired temperature.
- The temperature displayed and actual water temperature may vary to 5°C
Boil
The boil mode allows users to heat the water to 100°C (boiling point).
- Press the BOIL button. The button will light up and remain lit until the water is boiled.
- The kettle will emit a sound prompt when boiling has finished and enter standby mode. The water is now ready for use.
- The display will show the temperature of the water and change in real-time as it heats to boiling point.
Standby mode
In standby mode, the display will become blank if there is no operation within
3 minutes.
- Pressing the power button whilst the kettle is turned off will switch it to standby mode. The button will be flashing when the kettle is in standby mode.
- Pressing the power button whilst the kettle is in standby mode will turn off the kettle.
- The display will show the current temperature of the water within the kettle in this mode.
Kettle memory
- If the kettle is lifted off the base and placed back on the base within 30 seconds, any settings or modes will be consistent with what was previously set.
- If the kettle is not placed within 30 seconds, standby mode will be activated.
Burning protection
- if there is very little to no water in the kettle whilst the power base is heating, the kettle will start burning. A safety thermostat will automatically turn the kettle off if there is insufficient water. The display will show a prompt and the unit will automatically go into standby for safety.
- To reset, remove the kettle from the power base and allow it to cool before refilling with water.
Heating time limit
- If the heating time is greater than or equal to 15 minutes, the unit will stop boiling automatically.
- If the temperature does not rise in more than three minutes during heating, the unit will automatically turn off.
CLEANING & CARE
Before cleaning, ensure the kettle is unplugged and completely cool.
- Grasp the handle and remove the kettle from the power base. If necessary, wipe the inside and outside of the kettle with a soft, damp cloth. Mild detergent may be used. Wipe dry.
- Wipe the power base with a damp cloth.
Note :
Ensure both the power base and the kettle are completely dry after cleaning
and before subsequent use.
Descaling
Descaling may be necessary if mineral deposits form a scale coating inside the
kettle. These scale deposits may cause an unpleasant flavor in the water and
can lengthen boiling times.
Descaling chemicals can be used. Follow the instructions as Listed by their
manufacturer. Ensure the kettle is rinsed clean before continuing use.
Alternatively, white vinegar can be used to descale the kettle.
- Combine 3 cups of white vinegar with 2 cups of clean water.
- Pour this solution into the kettle. Do not boil.
- Leave the solution to soak in the kettle overnight.
- Discard the solution and then rinse the kettle out.
- Re-boil water in the kettle and discard, repeating as necessary to remove all vinegar odor.
- Repeat as necessary until scale is removed.
SPECIFICATIONS
-
Capacity
1.5L -
Power
220-240V, 2150W -
Temperature settings
40°C, 50°C, 60°C, 70°C, 80°C, 90°C
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>