kogan KAW6T21BLKA W60 True Wireless Earphones User Guide

June 6, 2024
Kogan

kogan - logo

USER GUIDE

KOGAN.COM

kogan KAW6T21BLKA W60 True Wireless Earphones

W60 TRUEIRELESS
EARPHONES
BLACK
KAW6T21BLKA

SAFETY & WARNINGS

User Safety Instructions

  • To avoid any possible hearing damage, keep the volume at a moderate level.
  • Avoid listening to music at loud volume levels for prolonged periods of time, as this may cause permanent hearing damage or hearing loss.
  • Always be aware of your surroundings while operating and do not use the earphones while driving, cycling, running or jogging or when doing any activity which requires your attention and ability to hear.

Product Safety Warning

  • For best results and increased battery life, disconnect the USB cable after charging is complete.
  • To charge, connect the USB cable to an AC adaptor with a max output voltage of 5V, and at least 1A current. If the output voltage of the charger exceeds the recommended amount, it will cause severe damage to the product and void the product warranty. If the current is less hat 1A, the device may not charge fully.
  • Use the original charging cable for charging the storage case.
  • Even if not used, charge the earphones and the battery case at least once every 6 months, for the good life cycle of the product.
  • Store in a cool and dry place. Keep away from hot and humid conditions.
  • The battery is designed to the last the lifecycle of the product. It should only be removed by a recycling facility. An attempt to remove or replace the batteries will damage the product and void the warranty.

To reduce the risk of injury:

  • Keep batteries out of reach of children.
  • Do not heat, open or dispose of the battery pack in a fire.
  • Do not allow metal objects to touch the battery on the device.
  • Do not expose the battery pack to excessive heat.

COMPONENTS LIST

OVERVIEW

kogan KAW6T21BLKA W60 True Wireless Earphones -
overview

FITTING TO YOUR EAR

Select the correct ear tip for a comfortable fit. Depending on your ears, it may be necessary to mix different sizes between the L and R earpieces.

OPERATION

Note: Ensure both the charging case and the earphones are fully charged before first use.

Pairing

  1. Auto Pairing
    • Upon removing the earphones out of the charging case and then the earphones will automatically turn on, sync together, and enter pairing mode.

  2. Syncing the earphones

  3. • Firstly, remove both Earphones from the charging case, earphones will turn on and enter the auto inter pairing mode. Wait a few seconds till both earphones are interconnected. You will hear a prompt tone “Pairing” when the interconnection is successful. Earphones are interconnected in 3-8 seconds normally.
    • To reactivate inter pairing mode, simply put the earphones back in the charging case, wait a few seconds, and then follow the above procedure again.

  4. Bluetooth pairing
    • Once successfully synced, the earphones are ready to pair with your Bluetooth-enabled device.
    • Turn on the Bluetooth function on your device (computer, smartphone, etc) and search for the earphones in the Bluetooth menu.
    • The earphones will appear as “W60” in the Bluetooth menu. Select to begin pairing, you will hear a prompt tone (“Connected”) when pairing is successful.
    • Once the connection is successful, you can start using the wireless earphones.
    • To disconnect, simply put the earphones back in the charging case and the earphones will automatically disconnect from any paired devices.
    • To reconnect the earphones with the same device, remove the earphones from the charging case and  the earphones will automatically connect to your device. Ensure that the Bluetooth function on your device is turned on.
    • To prevent the earphones from automatically connecting to a device, remove the earphones from the Bluetooth menu of that device.
    • To enjoy calls, music and audio output from your device to the earphones, ensure that the media connection for both calls and media files is activated in the Bluetooth menu.

Using MFB (Multi-Function Button)

| Left earphone (L)| Right earphone (R)
---|---|---
Play/Pause| Touch once| Touch once
Previous Song| Touch Twice|
Next Song| | Touch twice
Volume +| | Touch and hold
Volume –| Touch and hold|
Answer/End a call| Touch once| Touch once
Reject call| Touch and hold for 3 seconds| Touch and hold for 3 seconds
Voice assistant| Touch three times| Touch three times

Charging the earphones

  • Place the earphones in the charging case, a blue indicator light will turn on inside each earphone when charging. The light will turn off when the earphones are fully charged.

Charging the battery case

  • To charge the battery case plug in the Type-C cable to the charging port of the storage case and plug the USB end port to an AC adapter or computer (DC 5V/1A).
  • LED light indicators on the charging case will flash green while charging. When charging is complete the indicator lights will turn solid blue.

Reset

  • Remove the earphones from the charging case and ensure earphones are not connected to any mobile device.
  • Touch MFB of both earphones 7 times simultaneously, ensuring the blue light flashes twice quickly before powering off.
  • Place the wireless earphones back in the charging case, the indicator lights on the earphones will begin “breathing” (pulsing).
  • Delete the W60 Bluetooth pairing history from a mobile device. When you next remove the earphones from the charging case, they will be reset to their original state and have no device history.

Power Save Mode:

  • The wireless earphone will turn off automatically after 5 minutes not connected with any device.

Low Battery

  • When the battery level is below 3% you will hear a warning message (“Battery low”). The message is repeated after every 30 seconds. After 5 minutes, the wireless earphones will power off automatically.

SPECIFICATIONS

Bluetooth version Bluetooth 5.1
Battery Lithium-ion Polymer rechargeable battery Earphone: 50mAh*2pcs

Charging case: 300mAh
Speaker diameter| 09mm
Charging time| Earphone: 1.5 hours Charging case:1.5 hours
Earphone working time| About 7 hours (tested at 70% volume)
Charging case working time| 14 hours to charging earphones
Earphone size| 23.5 x 16.3 x 23.7mm
Earphone weight| 4.4g each
Charge box size| 65 x 25 x 27.6mm
Weight| 33g
Charging Port| USB Type-C

NOTES

Need more information?
We hope that this user guide has given you the assistance needed for a simple setup.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogon.com

KOGAN.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals