kogan KALXWTCBLKA Alexa Built in Smart Watch User Guide
- June 6, 2024
- Kogan
Table of Contents
- Kogan KALXWTCBLKA Alexa Built-in Smart Watch
- SAFETY & WARNINGS
- OVERVIEW
- OPERATION
- Getting started
- Physical button operation
- Navigating and operation basics
- FUNCTIONS
- USING WITH AMAZON ALEXA
- CLEANING & CARE
- SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Kogan KALXWTCBLKA Alexa Built-in Smart Watch
SAFETY & WARNINGS
- To prevent device failure, fire and explosion, never place the smartwatch or its accessories in extremely high temperature or extremely low-temperature areas.
- To prevent device damage, accessory damage, and device failure, always protect the device against strong impact or shock.
- Do not disassemble or modify the device or its accessories without authorization. Any device failure should be referred to our after-sales service personnel.
OVERVIEW
OPERATION
Charging: Whilst the watch is off, it automatically turns on when you put it on charge. To charge, attached the supplied magnetic charging cable to the magnetic charging contacts on the back of the smart watch.
Attach the opposite end of the cable into a USB charging adapter (not supplied). Ensure the adapter meets the specified voltage and current (5V /500mA).
Wearing
- Wear it correctly: make sure that the bottom sensor is properly attached to the skin and the strap shall be one finger away from the wrist.
- Touch operation: the smartwatch supports full-screen touch operations. Single-click: select; long press: enter or confirm.
- Touch button: the smartwatch has a touch button. Short press: return or close a notification.
Getting started
- Powering on and off
- To power off, open the Setup menu and select “Turning Off’.
- To power on, hold the physical button
Physical button operation
- Short press
- Return (back)
- Wake the screen when it is off.
- Press and hold
- Turn on the watch
- Hold for 5 seconds while charging to reset apps
- Hold for 5 seconds to activate Alexa on the watch face.
Navigating and operation basics
- Swipe the screen up/down
- To toggle through menu/ pages.
- To view long text or details.
- Swipe the screen left/right
- To toggle through menu/ pages.
- Tap the screen
- To complete the corresponding action, depending on which on-screen button is clicked.
- Tap and hold the screen
- To change the watch face wallpaper.
PAIRING WITH A VERY FIT APP
- For Android users, open Google Play Store on your smartphone.
- For iOS users, open the app store on your iPhone.
- Search for “VeryFit” and download the app.
- Alternatively, scan this QR code on your device to open the appropriate store for your device and go straight to the app download page.
- Once downloaded, open the app, fill in your info, then go to the “Home” page and select “Bind Device.”
- Make sure Bluetooth on your smartphone is turned on. You will see a list of devices. Select the Kogan Smart Watch and continue with the binding process.
- Light up the smartwatch screen and bring it close to your phone.
- Confirm the binding request on the smartwatch. Fill in your information and set your step goal on the app to complete the binding. Make sure location/GPS permissions are granted to the app for full functionality.
FUNCTIONS
-
App Swipe up or down to select an icon. The icons include Message, Health Data, Workout, Heart Rate, Stress, Sp02, Sleep, Relax, Music, Time, and Settings.
-
Dial You can switch between different dials in the “Dial Settings”. And you can download and install more dials in the “Dial Market”.
Health Data It supports viewing the daily accomplishment of the following info: Steps, Calories, Distance, and Activity.
-
Sports 14 Sports modes are provided: You can choose to show or hide any sports mode in VeryFit. To start an exercise, start the Sports opp, click the icon of sports type, set the goal, then start to exercise.
-
Heart Rate It supports measuring your heart rate at any time or viewing the daily monitoring data. Also, you can set the measurement frequency in the opp settings. After you start the heart rate measurement opp, you should keep your arms and wrists still during the measurement.
-
Stress After you start the stress measurement opp, you should keep your arms and wrists still during the measurement.
-
SpO2 After you start the SpO2 measurement opp, you should keep your arms and wrists still during the measurement.
-
Sleep You can view the most recent sleep record and sleep status at each stage.
-
Relax Enter the Relax opp and choose the duration. Click to start, then follow the vibration frequency and animation instructions to adjust your breathing and it will help you relax.
-
Message The watch supports multiple reminder modes, including message reminder, incoming call reminder, walking reminder, drinking reminder, exercise goal reminder, exercise centre rate warning reminder, etc.
-
A stopwatch and a timer are provided.
-
Timer You can set a timer with a preset duration on the watch and the timer will remind you when the timer expires; you can customize the timer time.
-
Alarm
1. The watch can be set to add, delete, turn on/ off the alarm; you can also set the alarm to the watch through the app; you can also set the label you need in the alarm to identify the alarm
2. You can set the alarm delay time and times in the opp to decide how long you want to delay and how many times to delay- Weather Supports three-day weather viewing, you can view today’s “current weather, highest and lowest weather values” and the “highest and lowest weather values” for the next two days
- Music When the watch is connected to the app, you can control the mobile music player to perform the functions of “next, previous”, “play/pause”, and “volume increase and decrease”. This function can be displayed/hidden in the opp settings.
- Exercise Record You can view your recent exercise records on the watch, including detailed data about your exercise; you can also view the exercise records on the opp
- Find Phone When the watch is connected to the opp, you can make your phone ring. Tap the icon to end the ringing. This function can be displayed\hide in the opp settings.
- Settings
1. You can set your wrist-lifting screen, real-time heart rate and do not disturb the switch on the watch This function can be displayed\hide in the opp settings
2. You can switch the locally stored watch face on the watch
3. You can set the brightness of the watch and the length of time the screen is on the watch; you can set the switch to reduce the brightness at night
4. You can control the shutdown, restart, and factory settings of the watch on the watch (after restoring the factory settings, all data in the watch will be cleared and the binding relationship with the phone will be released)USING WITH AMAZON ALEXA
Syncing with Alexa
Ensure you have the Amazon Alexa app downloaded and have your Alexa account
set up first. To pair the Smart Watch with Alexa, open the VeryFit app, go to
the Device page, click on your device, then find the Amazon Alexa function
among the settings.
Follow the prompts on the screen, log in with your Amazon account, authorise
your Smart Watch by clicking Allow, and finish the pairing process. Finally,
you can choose your preferred language setting for Alexa.
The watch supports Alexa voice functions. After inputting a voice command in
the listening interface, it will enter the thinking interface and return the
result.
Timed out? When the request times out, the voice cannot be recognized,
the account is not logged in, the network connection is unstable, or the
Bluetooth is not connected, a corresponding prompt will be displayed.
Please note: The watch has to stay connected with the phone in order to use Alexa.
Time and Location Settings of Alexa Please note that Alexa doesn’t know the location and time zone of your Smart Watch until you have the location and time zone updated in the Alexa opp. Without doing this, Alexa cannot check your local weather or set the correct alarm.
CLEANING & CARE
Below are three recommendations on wearing and maintenance:
- Keep the device clean
- Keep the device dry
- Do not wear the device too tight
- For cleaning:
- Do not use household cleaners to clean the device. Use soap-free cleaners instead.
- For stains that are difficult to remove, it is recommended to scrub with alcohol.
Waterproof performance: the device is not suitable for diving, swimming in the sea or sauna, it is suitable for swimming pool, shower (cold water) and swimming in shallows.
SPECIFICATIONS
| Battery capacity | 300mAh |
|---|---|
| Charging Time | about 2.5 hours |
| Waterproof level | 5ATM |
| Operating Temperature | 0°C-60°C |
| Product Frequency | 2402-2480MHZ |
| Screen Type | 1.69-inch colour screen |
| Charging Voltage | 5V±0.2v |
| Battery Life | 5days |
| Weight of Product | 42g |
| Bluetooth Version | BLE5.0 |
| Max. transmission Power Consumption | 4dBm |