GUANGDONG YIERDA INTELLIGENT YED1908 Mini Crawler RC Car Instructions

GUANGDONG YIERDA INTELLIGENT YED1908 Mini Crawler RC Car

THANK YOU FOR YOUR CHOOSE OUR PRODUCT IN ORDER TO UNDERSTAND OUR PRODUCT BETTER.PLEASE READ THE FOLLOWING NSTRUCTIONSFORE USING.WHICH BRING YOU DIFFERENT OPERATING EXPERIENCE.

Product Information

The product is a communication device that includes a receiver and an antenna. The device operates on a specific frequency range and requires proper installation and usage to function correctly. The device is designed to receive signals from a transmitter and convert them into audio or visual output for the user.

Product Usage Instructions

To ensure optimal performance of the communication device, please follow the below instructions:

• Reorient or relocate the receiving antenna to ensure it is properly aligned with the transmitter’s signal.
• Increase the separation between the equipment and receiver to avoid interference from other devices.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to prevent electrical interference.
• If you experience any issues with the product, consult the dealer or an experienced radio/TV technician for help. Do not attempt to make changes or modifications to the device as this could void your authority to operate it.

NOTE

• BATTERY OPERATE PRODUCT
  This product is suitable for children 6 years old and above, after assembled/charged by adults, play with children again. Please use this product under the supervision of adults.

• WARNING
  Please do not disassemble or modify this product without authorization. Any changes may cause the product to malfunction.

PRECAUTIONS FOR USE

1. The car body of the product uses 31.SV AAA non-rechargeable batteries, the remote control uses 21.SV AAA non-rechargeable batteries.
2. Battery removal and loading should be toy battery room polarity and voltage correctly operate;
3. The non-rechargeable battery is not rechargeable;
4. Different types of batteries or old and new batteries can not be mixed;
5. Only batteries that are the same or equivalent to the recommended battery can be used;
6. Exhausted battery should be removed from the toy; if not used for a long time, please remove the toy battery;

PRODUCT CONFIGURATION

INSTALL THE CAR COVER SHOW

HOW TO INSTALL THE BATTERY

DESCRIPTION OF AUTOMATIC CODE MATCHING

1. After installing the battery into the car and remote control, turn on the switches of the two and start matching. The green light at the bottom of the car lights up, and the red light on the remote control flashes. When the red light on the remote control stops flashing, it indicates successful connection.

2. Each remote control can only be connected to one remote control car. When the connection is successful, each car will not interfere with each other.
   Note: Multiple cars cannot be connected at the same time.

3. The remote control did not find a signal from the remote control car when it was energized after one minute, and the power indicator was flashing, and the power switch must be restarted to link the frequency.

4. When you need to pair other remote control cars of the same model, you need to tum off the power of the remote control and the remote control car to repair.

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

TRACEABILITY INFORMATION

• Product Name: RC Car
• Model NO.: YED1908
• Manufacturer: GUANGDONG YI ERDA INTELLIGENT & TECHNICAL

INDUSTRIAL COMPANY LIMITED

• Address: WEST OF WULITING ROAD, XIAJIAO INDUSTRIAL ZONE, CHENGHAl,SHANTOU, GUANGDONG, CHINA
• Distributed By: Xiamen Tenuote Electronic Co.,Ltd
• Distributor Address: No.450, Hengtian Road , Jimei District, Xiamen, China
• E-mail: tecnocktoy@gmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>