SONY FW-85BZ40H BRAVIA 4K Professional Display User Guide
- June 4, 2024
- Sony
Table of Contents
SONY FW-85BZ40H BRAVIA 4K Professional Display
Precautions when installing
To customers
Multi-screen installation of LCD Displays or LCD Monitors requires proper
work. Be sure to ask a dealer or installer to install the LCD Display or LCD
Monitor properly with full consideration for safety. Pay close attention to
the wiring of the power supply, etc., and do not perform any installation by
yourself.
WARNING
Failure to follow safety precautions may result in fire or personal injury.
This manual describes important precautions to prevent accidents and how to
handle the product. Read this manual thoroughly to use the product safely.
After reading this manual, be sure to keep it where you can see it anytime.
To dealers and distributors
Multi-screen installation requires special skills, so read this manual
thoroughly before installation. We are not responsible for any accident or
damage caused by improper installation, improper handling, or use of LCD
Displays or LCD Monitors other than those supported by the product. Hand this
manual over to the customer after the LCD Display or LCD Monitor installation
is completed.
Do not block the ventilation holes of the LCD Display or LCD Monitor.
If the ventilation holes of the LCD Display or LCD Monitor are blocked with
tape or mounting brackets during installation, heat may build up inside the
LCD Display or LCD Monitor and cause a fire.
Target models
This manual describes the multi-screen installation for the following LCD Displays or LCD Monitors. FW-85BZ40H / 75BZ40H / 65BZ40H / 55BZ40H / 100BZ40J / 50BZ35J / 43BZ35J / 75BZ30J / 65BZ30J / 55BZ30J / 50BZ30J / 43BZ30J / 32BZ30J / 85BU40H / 75BU40H / 65BU40H / 55BU40H / 100BU40J / 50BU35J / 43BU35J / 75BU30J / 65BU30J / 55BU30J / 50BU30J / 43BU30J / 32BU30J
Installation
- Observe the following standards when installing.
- When carrying the LCD Display or LCD Monitor, hold it horizontally as there is a risk of the LCD Display or LCD Monitor falling when you hold it vertically. Be careful not to apply excessive force to the LCD Display or LCD Monitor, as it may cause deformation.
- We recommend regular checks and maintenance to ensure that there is no problem after installation.
- When installing vertically, rotate the LCD Display or LCD Monitor 90 degrees counterclockwise from the horizontal position. Do not rotate the LCD Display or LCD Monitor clockwise to install it.
- When using mounting brackets during installation, the length of the screws to attach to the LCD Display or LCD Monitor depends on the thickness of the mounting brackets. See the following for details.
- For details on the installation angles, refer to “Wall mount unit mounting method” for each of the LCD Displays or LCD Monitors (attached sheet) and the manual supplied with the mounting brackets.
Installation conditions
Be sure to observe the following temperature, humidity, and installation
conditions when installing.
Temperature conditions
- Keep the ambient temperature of the LCD Display or LCD Monitor* within the specified upper-temperature range from 0 °C (32 °F).
- For temperature conditions per LCD Display or LCD Monitor and installation angles, see “Upper-temperature limits depending on the LCD Displays or LCD Monitors and installation angles” (page 7 to 8).
- For the installation locations or installation conditions that may result in high temperatures, use an air conditioner or fan to ensure proper ventilation to keep the LCD Display or LCD Monitor within the specified temperature range.
Ambient temperature is the temperature around the LCD Display or LCD Monitor including the front and back of the panels.
Humidity conditions
Use the LCD Display or LCD Monitor within the following humidity range.
| Model name | Humidity conditions |
|---|
FW-85BZ40H / 75BZ40H / 65BZ40H / 55BZ40H / 85BU40H / 75BU40H / 65BU40H / 55BU40H|
10% to 80% (with no condensation)
FW-100BZ40J / 50BZ35J / 43BZ35J / 75BZ30J / 65BZ30J / 55BZ30J / 50BZ30J / 43BZ30J / 32BZ30J / 100BU40J /
50BU35J / 43BU35J / 75BU30J / 65BU30J / 55BU30J /
50BU30J / 43BU30J / 32BU30J
|
20% to 80% (with no condensation)
Installation conditions
- Keep a distance of 1 mm (1/16 in) or more between LCD Displays or LCD Monitors and do not allow adjacent LCD Displays or LCD Monitors to come into contact with each other.
- Install so that the ventilation holes on the back of the LCD Display or LCD Monitor are not blocked.
When making multi-screen installation in a single row in horizontal installation, the distance between the left and right LCD Displays or LCD Monitors can be 1 mm (1 /16 in) or less.
Multi-screen installation in a single row in horizontal installation
Be careful not to apply a load to each of the adjacent LCD Displays or LCD Monitors.
Upper-temperature limits depending on the LCD Displays or LCD Monitors and
installation angles
Check the following, and install the LCD Display or LCD Monitor so that it is
within the temperature range according to the conditions.
Horizontal installation
Model name
|
No tilt
| Forward tilt up to 20 degrees (*Forward tilt up to 15 degrees)
|
Backward tilt up to 20 degrees
---|---|---|---
FW-85BZ40H / 85BU40H| 40 °C (104 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-75BZ40H / 75BU40H| 40 °C (104 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-65BZ40H / 65BU40H| 40 °C (104 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-55BZ40H / 55BU40H| 40 °C (104 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-100BZ40J / 100BU40J*| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40
°C (104 °F) or lower
FW-50BZ35J / 50BU35J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
FW-43BZ35J / 43BU35J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
FW-75BZ30J / 75BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
FW-65BZ30J / 65BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
FW-55BZ30J / 55BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 39 °C
(102.2 °F) or lower
FW-50BZ30J / 50BU30J| 38 °C (100.4 °F) or lower| 40 °C (104 °F) or lower| 38
°C (100.4 °F) or lower
FW-43BZ30J / 43BU30J| 38 °C (100.4 °F) or lower| 39 °C (102.2 °F) or lower| 37
°C (98.6 °F) or lower
FW-32BZ30J / 32BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
Vertical installation
Model name| No tilt
| Forward tilt up to 20 degrees (*Forward tilt up to 15 degrees)
| Backward tilt up to 20 degrees
---|---|---|---
FW-85BZ40H / 85BU40H| 35 °C (95 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-75BZ40H / 75BU40H| 35 °C (95 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-65BZ40H / 65BU40H| 35 °C (95 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-55BZ40H / 55BU40H| 35 °C (95 °F) or lower| 35 °C (95 °F) or lower| 35 °C
(95 °F) or lower
FW-100BZ40J / 100BU40J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40
°C (104 °F) or lower
FW-50BZ35J / 50BU35J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| ―
FW-43BZ35J / 43BU35J| 40 °C (104 °F) or lower| 37 °C (98.6 °F) or lower| ―
FW-75BZ30J / 75BU30J| 38 °C (100.4 °F) or lower| 37 °C (98.6 °F) or lower| 39
°C (102.2 °F) or lower
FW-65BZ30J / 65BU30J| 38 °C (100.4 °F) or lower| 38 °C (100.4 °F) or lower|
38 °C (100.4 °F) or lower
FW-55BZ30J / 55BU30J| 36 °C (96.8 °F) or lower| 37 °C (98.6 °F) or lower| 38
°C (100.4 °F) or lower
FW-50BZ30J / 50BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
FW-43BZ30J / 43BU30J| 38 °C (100.4 °F) or lower| 40 °C (104 °F) or lower| 36
°C (96.8 °F) or lower
FW-32BZ30J / 32BU30J| 40 °C (104 °F) or lower| 40 °C (104 °F) or lower| 40 °C
(104 °F) or lower
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>