cellhelmet BAR-SM-BT-SPKR Wireless Mini Speaker User Manual

: June 1, 2024
: cellhelmet

Table of Contents

cellhelmet BAR-SM-BT-SPKR Wireless Mini Speaker
Product Information
Product Usage Instructions
PACKAGING CONTENT
BASIC CONTROLS
QUICK START
INDICATOR STATUS
SPECIFICATIONS
NOTICE
WARRANTY
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cellhelmet BAR-SM-BT-SPKR Wireless Mini Speaker

Product Information

Specifications:

Compliance: Part 15 of FCC Rules
RF Exposure: Meets general requirements for portable use
Interference Handling: Must not cause harmful interference; must accept any received interference

Product Usage Instructions

1. Compliance with FCC Rules:
Ensure that the device is operated by Part 15 of the FCC Rules to prevent harmful interference.
RF Exposure:
The device is designed for portable use without restrictions related to RF exposure. Keep the device in a suitable exposure condition.
Interference Correction:
If interference is experienced, try the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to a different circuit outlet than the receiver.
Consult the dealer or a radio/TV technician for assistance.
Modifications:
Do not make any changes or modifications to the unit that are not approved by the responsible party as it may void the user’s authority to operate the equipment.

FAQ (Frequently Asked Questions)

Q: Can I modify the device on my own?
A: No, any modifications not approved by the responsible party may void your authority to operate the equipment.
Q: What should I do if I experience interference?
A: Try reorienting the antenna, increasing separation from other devices, or consulting a professional for help.

PACKAGING CONTENT

What’s in the box?

BAR audio mini speaker
USB charging cable
User manual

$cellhelmet-BAR-SM-BT-SPKR-Wireless-Mini-Speaker-Fig- $1$$

BASIC CONTROLS

Press and hold • Turn on/off
Press once • play/pause
Press twice • next track
Press three times • Previous track

$cellhelmet-BAR-SM-BT-SPKR-Wireless-Mini-Speaker-Fig- $2$$

QUICK START

$cellhelmet-BAR-SM-BT-SPKR-Wireless-Mini-Speaker-Fig- $3$$

NOTE
Do not use sub-par quality charging cords.

INDICATOR STATUS

$cellhelmet-BAR-SM-BT-SPKR-Wireless-Mini-Speaker-Fig- $4$$

SPECIFICATIONS

Battery: 500mAh
RMS: 3W
Frequency: 100-18KHz
SNR: S/N≥85DB
Playback Time: 4 hours @appropriate volume
Time to Full Charge: 2 hours
Wireless Frequency: 2.4-2.48GHz
Wireless Protocols: HS/HF, A2DP, AVRCP, OPP

NOTICE

Do not use the product in water
Clean with a dry cloth
Do not use near-open flames
Dispose of the product properly
Do not use it in extreme temperatures
Do not step on or crimp the power cord
Do not attempt to repair it on your own. Refer to cellhelmet.com for info on returns

WARRANTY

This great product is covered under cellhelmet’s lifetime product warranty. If you run into any issues, please refer to cellhelmet.com for product returns and warranty redemption.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try The device has been evaluated to meet the general RF exposure requirement. The device can be used in portable exposure conditions without restriction.to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.