kogan KALED43RT9220SVA 43-Inch 4K HDR LED Smart TV User Guide

June 6, 2024
Kogan

KALED43RT9220SVA 43-Inch 4K HDR LED Smart TV

QUICK START GUIDE
43″ SMART HDR 4K UHD LED TV
SERIES 9 RT9220
(KALED43RT9220SVA)

COMPONENTS

A

B

C

D

QUICK START GUIDE

E

43″ SMART HDR 4K UHD LED TV
FSERIES 9 RT9220 (KALE D40RT92 20SVA)

G

A Kogan 43″ Smart HDR 4K UHD LED TV
B Remote control C Stand (x2)

D Ba4 x 18mm screw (x4) E AAA battery (x2) F Quick-start guide G Warranty card

NOT INCLUDED Phillips head screwdriver, antenna cable, broadband internet connection.
3

REMOTE CONTROL OVERVIEW

Switches the TVbetween on and standby mode Microphone hole Mute or restore TV sound Figures 0-9 are used to directly input channel number EPG Press to display Electronic Program Guide and select the favorite channel Press to start recording the program INFO Press to info the source and channel’s info Google Assistant
4

VOL + VOL CH + CH

Increase the volume Decrease the volume Increase the program Decrease the program
Displays the OSD(On Screen Display) menu Display/Select signal source options To confirm the choice with program the highlighted menu item

REMOTE CONTROL OVERVIEW

Press these buttons to select items Press these buttons to select and adjust items BACK Go back to the previous step
EXIT Press to exit the OSD menu Displays the home screen Connects to NETFLIX for viewing online TVshows and films(internet connection required).
Connects to YouTube (internet connection required). Accesso diretto a Amazon Prime Video To open app homepage

Press these buttons according to different prompts
Press to fast reverse in USB mode Press to fast forward in USB mode

Press to play the video and press again to pause the video

Hold on or off for current page display

SUBT

SUBT

Press to enter Teletext when play the program

AUDIO Press to change the language when playing the stream which contains multi-language

5

ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly a. Attach stands to base of TV. b. Insert two 18 mm screws for each stand, and use Phillips head screwdriver (not supplied) to tighten.

1a

1b

BA4X18 (4 PCS)

2. Remote control assembly a. Open the battery compartment cover on the back side. b. Insert two 1.5V AAA size batteries, making sure to match the polarity markings (+ / -) of the batteries with the diagram inside the compartment.
c. Replace battery compartment cover.

2a

2b

2c

6

ASSEMBLY AND INSTALLATION
3. Connect to antenna a. Connect an antenna cable (not supplied) via the ‘ANT’ input port at the back of the TV. b. Ensure the antenna cable is also connected to a working antenna,either via an antenna wall socket in your home, or directly. Antenna wall socket
3b
3a
Antenna cable (not supplied)
4. Turning TV on Plug the power cord into a suitable power outlet, then press the POWER ( ) button on the remote control, making sure to aim it at the sensor at the front of the TV. Alternatively, you can press the power button on the lower side of the back panel on the TV.
TURNING TV OFF Press the POWER ( ) button on the remote control to enter standby mode. To power down the TV completely, unplug the power cord from the power outlet. Do not leave your set in standby mode for long periods of time. If you will not use the TV for a long time, it is recommended to unplug the set from both the power outlet and aerial.
7

INITIAL INSTALLATION
1. Initial Installation
The first time you switch the TV on, the initial step screen appears which guides you through the initial proces.Please according to the Text Tips to inish initial installtion.
1. 1 Language select

Press / remote control to select the language option,then clickOKto confirm.
1.2 Quickly set up your TV with your Android phone? (Continue/skip) Steps:
1. On your Android Phone, open the Pre-installed app “Google”. 2. Type or say, “Ok Google, set up my device”. 3. Tap the model name on the list.
1.3 Configure the network
Select wired or wireless to connect to internet. >If you select skip,it could be performed in homepage or settings menu.
1.4 Google Account Sign in
Sign in to get new apps,recommendations,movies,the Assistant,and more from Google.Two ways to login Google account:
->Use your phone or computer: 1. Visit androidtv.com/setup on your phone or computer, Make sure your other device is on the same Wi-Fi network as your Android TV TM
8

INITIAL INSTALLATION
2.Enter the display code on your phone or computer
->Use your remote: Use the remote to enter your Google account and password to sign in to Google account.
1.5 Google setting
In these steps you will setup the Terms of Service,Location,Help improve Android, Google Assistant and additional Google functions.
1.6 Play Auto Installs
Select install or un-install he recommended apps and Google apps by using this process. ->Press “Continue” to the next setting page.
1.7 Pairing Bluetooth Remote
-> Press’BACK ‘and ‘ VOL- ‘ simultaneously on remote control to enter the Bluetooth pairing mode. The Indicator light on remote control will flash when enter the pairing mode. -> PressOKto begin pairing. -> Press on remote control to skip the pairing mode.
9

INITIAL INSTALLATION
1.8 Country select
->Press / on remote control to select the country option,then click OKto confirm.
1.9 Set the TV password for Parental Controls,”0000″ is invalid. 1.10 Select TV mode(Home/Retail)
Home mode is optimized for efficient energy usage for home use. Retail mode is optimized to store demo with fixed settings.
1.11 Chromecast built-inTM
Select On/Off to make Chromecast built-in available.
1.12 TV Channel Setting
->Select Antenna/Cable/Satelite to scan TV channel. ->If you select skip, the channel scan could be performed in menu.
1.13 Setup completed and Disclaimer Terms
10

SETTINGS
2. HOME
When initial setup is complete,the TV will enter the homepage by defaul t,or press on remote control to display the homepage. ->Press / / / on remote control to switch between Google Assistant,Apps,Play Next,Netflix, YouTube, and more on the Homepage. -> PressOKto enter.
Google Assistant
Use your voice to jump to shows,control devices,and more–with Google Assistant
Apps
List of downloaded and pre-loaded apps on your device
Play Next
Based on your watch history and includes next episode in a series or unfinished movies
Settings
Manage apps and TV controls, changepreferences, sounds,and account
Favorite apps
Quick access to frequently used apps
Channels
For easy content discovery
11

CONNECTING TO THE INTERNET
3.Settings
Allows to set various performance of your TV. -> Press / on remote control to select “Settings”which is in the upper right corner of the screen. -> Press / on remote control to select the option which you want to adjust in the Settings menu. -> PressOKto enter.
3.1 Network&internet
Adjust all network setting and check connection if you have connec tion problems. -> Press / remote control to select “Network&internet” in the settings menu. -> Press / remote control to select:Wi–Fi/Add new network/Scanning always available/Proxy settings/IP settings.
3.2 Channel
-> Press / on remote control to select “Channel” menu. ->PressOKto enter”Parental Controls”, then click / or use the number buttons on remote control to enter your PIN(Password for Parental Controls).
3.3 Device Preferences
-> Press / on remote control to select “Device Preferences”. -> Press / on remote control to select the options of About, Date&time, Timer, Language, Inputs, Picture, Sound, Google Assistant, Reset,etc.
12

TUNING
->PressOKto jump to the corresponding sub-option.
3.3.1 About
-> Press / on remote control to select “About”. -> Press / on remote control to check additional information such as System update,Device name, Restart, Status, and more. -> Press on remote control to return to the previous menu.Press on remote control to exit the menu.
3.3.2 Reset
If select reset, it will erase all data from your device’s internal storage,including:your Google account, System and app data and settings, and downloaded apps. -> Press / on remote control to select “Reset”. -> Press / on remote control to select “Cancel” or “Erase everything”.
13

APP INSTALL/MOVE/UNINSTALL
4 App Install/Move/Uninstall
->Press / on remote control to select”Apps”on Homepage,then click OKto enter. -> Select “Get more apps”and input app name. ->Select “search”which is in the upper right corner of the page.
Example for “Facebook”
4.1 Install
->Input “Facebook”, find “Facebook”App will show in the list,then click OKto select it. ->Select “Install”,when completed select to open or Uninstall.
4.2 Move
->Select”Facebook”, press and holdOKon remote control, then click / remote control to select”Move” -> Press / / / on remote control to move,then click OKto confirm.
4.3 Uninstall
->Select “Facebook”, press and holdOKon remote control, then click / on remote control to select”Uninstall”. -> pressOKto uninstall.
14

TV SOURCE SETTING
5 TV source setting
The way to enter TV source in Homepage: ->Press on remote control or Select”Live TV”on Homepage.
->Press on remote control. ->Press on remote control to select”Channels”and select”New Channels Available”to enter.
15

HOW TO TURN OFF AUTO SLEEP FUNCTION
Menu – > Settings – > Device Preferences -> Power – > Off

Menu

Power

Settings

Off

Device Preferences

16

BASIC TROUBLESHOOTING

Poor picture and sound quality
Try a different channel Adjust the antenna Check all connections
No picture or sound in TV status
Try another channel Press the TV/AV button Make sure TV is plugged in Check the antenna connection
No sound or sound is too low at maximum volume
Check the volume settings on any external speakers connected to your television
Adjust the TV volume accordingly Check another channel or input Check that MUTE hasn’t been turned on
No colour, wrong colour or tints
Make sure the program itself is broadcast in colour Select the picture menu, then adjust the colour and tint submenus
Picture rolls vertically
Check all connections
Blurred or snowy picture, distorted sound
Check direction, location and connections to your antenna
Issues may be caused by the use of an indoor antenna (poor signal)

Remote control malfunctions
Replace remote control batteries Check battery terminals Remote is out of range, move closer to TV Remove any obstructions between remote and IR sensor of TV Make sure the power cord to your TV is plugged in and turned on
Image is not centred on the screen
Adjust the horizontal and vertical position
“No Signal” on HDMI source
Test the device with a different HDMI cable
Plug the device into another HDMI port
Try a different device connected to the same cable and port
Perform a factory reset on your TV
For our full TV troubleshooting guide and extended User Manual for this TV, head online to help.kogan.com

17

NOTES
18

Need more information? This is a Quick Start Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals