Seagate Enterprise ST600MM0009 Internal Hard Drive User Manual

Seagate Enterprise ST600MM0009 Internal Hard Drive

Enterprise Performance 10K HDD

v9 SAS Product Manual

*512E/4KN**

• Standard Models
• ST2400MM0129
• ST1800MM0129
• ST1200MM0129
• ST600MM0099
• Self-Encrypting Drive
• (SED) Models
• ST2400MM0139
• ST1800MM0139
• ST1200MM0139
• ST600MM0109
• SED FIPS140-2 Models
• Review Pending
• ST2400MM0149
• ST1800MM0149
• ST1200MM0149
• Instant Secure Erase
• (ISE) Models
• ST2400MM0159
• ST1800MM0159
• ST1200MM0159
• ST600MM0119

512N

• Standard Models

• ST1200MM0009

• ST600MM0009

• Self-Encrypting Drive

• (SED) Models

• ST1200MM0039

• ST600MM0039

• SED FIPS140-2 Models

• Review Pending

• ST1200MM0069

• Instant Secure Erase

• (ISE) Models

• ST1200MM0099

• ST600MM0069

• Default configuration is 512E for 512E / 4KN drives.

See Section 4.2.2 to Fast Format to 4KN in seconds

Not all drives may be available in all countries.

• 100818015 Rev. F
• November 2017

Scope

• This manual describes Seagate® Enterprise Performance 10K HDD (Serial Attached SCSI) with Advanced Caching disk drives (available on 512E/4Kn only).
• Seagate Enterprise Performance 10K HDD drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The
• Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive models.
• Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements. If integrators are designing a system that will use one of the models listed or future-generation products and need further assistance, please contact the Field Applications Engineer (FAE) or our global support services group as shown on page 7.
• Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Applicable standards and reference documentation

• The drives documented in this manual have been developed as system peripherals to the highest standards of design and construction. The drives depend on host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regulation. In particular, the drives must be securely mounted to guarantee the specified performance characteristics. Mounting by bottom holes must meet the requirements of Section 10.3.

Agency and Safety Certifications

• Each Hard Drive and Solid State Drive (“drives”) has a product label that includes certifications that apply to that specific drive. The following information provides an overview of requirements that may apply to the drive.

Safety certification

• These products are certified to meet the requirements of UL/cUL 60950-1, EN 60950-1, and may also include, IEC 62368, UL 62368, and EN 62368.
• The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Specification” and the “TCG Storag e Workgroup Security Subsystem Class: Enterprise_A” specification with additional vendor-unique features as noted in this product manual.

Regulatory Models

The following regulatory model number represents all features and configurations within the series:

• Regulatory Model Numbers: STT003
• The security features of Self-Encrypting Drive models are based on the “TCG Storage Architecture Core Specification” and the “TCG Storage Workgroup Security Subsystem Class: Enterprise_A” specification with additional vendor-unique features as noted in this product manual.

Electromagnetic compatibility

• The drive, as delivered, is designed for system integration and installation into a suitable enclosure before use. The drive is supplied as a subassembly and is not subject to Subpart B of Part 15 of the FCC Rules and Regulations.
• The design characteristics of the drive serve to minimize radiation when installed in an enclosure that provides reasonable shielding. The drive is capable of meeting the Class B limits of the FCC Rules and Regulations when properly packaged; however, it is the user’s responsibility to ensure that the drive meets the appropriate EMI requirements in their system. Shielded I/O cables may be required if the enclosure does not provide adequate shielding. If the I/O cables are external to the enclosure, shielded cables should be used, with the shields grounded to the enclosure and to the host controller.

Electromagnetic susceptibility

• The drive as delivered is tested to meet susceptibility requirements in a representative enclosure. It is the responsibility of those integrating the drive within their systems to perform those tests required and design their system to ensure that equipment operating in the same system as the drive or external to the system does not adversely affect the performance of the drive. See Section 6.4, “DC power consumption”.

Electromagnetic compliance

• Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and RCM Marking. The drive was tested in a representative system for typical applications and complied with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. The selected system represents the most popular characteristics for test platforms.
• Although the test system with this Seagate model complies with the directives/standards, we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide the appropriate marking for their product.

Frequently Asked Questions

What is the Seagate Enterprise ST600MM0009 Internal Hard Drive known for?

The Seagate Enterprise ST600MM0009 is known for its high capacity and high- performance capabilities, making it ideal for data centers. The Seagate Enterprise ST600MM0009 is known for its high capacity and high-performance capabilities, making it ideal for data centers.

What is the spindle speed of the ST600MM0009 hard drive?

The ST600MM0009 has a spindle speed of 10,000 RPM.

Does the ST600MM0009 support SAS Protocol specifications?

Yes, the ST600MM0009 supports the SAS Protocol specifications as described in the product manual.

What is the average latency of the ST600MM0009 hard drive?

The average latency of the ST600MM0009 is 2.9 milliseconds.

What is the maximum capacity of the ST600MM0009 hard drive?

The ST600MM0009 can deliver up to 2.4TB of high-performance data access for write-intensive applications.

Does the ST600MM0009 support Seagate Secure features?

Yes, the ST600MM0009 supports Seagate Secure features for preventing unauthorized access to data and for compliance with data security standards.

What is Protection Information (PI) in the context of the ST600MM0009?

Protection Information (PI) is a feature that protects against data corruption and requires PI-compliant host or controller support.

Does the ST600MM0009 have a FastFormat option for switching to 512e/4Kn AF?

Yes, the ST600MM0009 has the FastFormat option for switching to 512e/4Kn AF, as described in Section 4.2.2 of the manual.

What is the warranty period for the ST600MM0009 hard drive?

The ST600MM0009 comes with a limited warranty of 5 years.

What are the power management features of the ST600MM0009?

The ST600MM0009 features Seagate PowerChoice™ technology for T10-compliant power management, allowing organizations to tailor systems for enhanced power consumption.

What are the typical operating temperature ranges for the ST600MM0009?

The ST600MM0009 operates in an ambient temperature range of 5°C to 55°C.

Does the ST600MM0009 meet electromagnetic compatibility standards?

Yes, the ST600MM0009 is designed to meet electromagnetic compatibility standards.

User Manual

Reference:Seagate Enterprise ST600MM0009 Internal Hard Drive User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>