Harley Benton 264101 Powerplant Junior Power Supply User Manual
- June 12, 2024
- Harley Benton
Table of Contents
Harley Benton 264101 Powerplant Junior Power Supply
Product Information
- Product Name: Powerplant Junior Power Supply
- Date: 13.09.2022
- ID: 264101 (V3)
General Information
The Powerplant Junior Power Supply is a device that transforms mains voltage
into safety extra-low voltage, specifically designed for the voltage supply of
effects pedals.
Further Information
For additional information and details about the Powerplant Junior Power
Supply, please visit our website at www.thomann.de.
On our website, you can find the following:
- Downloadable PDF version of this user manual
- Keyword search function in the electronic version for quick navigation
- Online guides providing detailed technical information
- Personal consultation through our technical hotline for assistance
- Customer service for any device-related problems
Symbols and Signal Words
In this manual, the following symbols and signal words are used:
| Signal Word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious
injury if it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in material and environmental
damage if it is not avoided.
Safety Instructions
Intended Use:
The Powerplant Junior Power Supply is intended for transforming mains voltage
into safety extra-low voltage for effects pedals. Only use the device as
described in this user manual. Any other use or use under different operating
conditions may result in personal injury or property damage. The manufacturer
does not assume liability for damages resulting from improper use.
This device should only be used by individuals with sufficient physical, sensorial, and intellectual abilities, as well as corresponding knowledge and experience. Other individuals may use this device only under supervision or instruction from someone responsible for their safety.
Safety Warnings:
- DANGER! Danger for children: Ensure that plastic bags, packaging, etc., are disposed of properly and kept out of reach of babies and young children to prevent choking hazards. Do not let children detach small parts (e.g., knobs) from the unit to avoid the risk of swallowing and choking. Children should never use electrical devices unsupervised.
- DANGER! Electric shock caused by high voltages inside: The device contains areas with high voltages. Never remove any covers, as there are no user-serviceable parts inside. Do not use the device if covers, protectors, or optical components are missing or damaged.
General information
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development. We there‐fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de.
Further information
On our website (www.thomann.de) you will find lots of further information and details on the following points:
| Download | This manual is also available as PDF file for you to download. |
|---|---|
| Keyword search | Use the search function in the electronic version to find the |
topics of interest for you quickly.
Online guides| Our online guides provide detailed information on technical
basics and terms.
Personal consultation| For personal consultation please contact our technical
hotline.
Service| If you have any problems with the device the customer service will
gladly assist you.
Symbols and signal words
In this section you will find an overview of the meaning of symbols and
signal words that are used in this manual.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
NOTICE!| This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and environmental damage
if it is not avoided.
|
Warning signs| Type of danger
| Warning – high-voltage.
| Warning – danger zone.
Safety instructions
Intended use
- This device transforms mains voltage into safety extra-low voltage, e.g. for the voltage supply of effects pedals. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
- This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts (e.g. knobs or the like) from the unit.
They could swallow the pieces and choke! Never let children unattended use
electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside. Do not use the
device if covers, protectors or optical components are missing or damaged.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a
protective contact plug. Do not modify the mains cable or the plug. Failure to
do so could result in electric shock/death or fire. If in doubt, seek advice
from a registered electrician.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy
dirt, and strong vibrations. Only operate the device within the ambient
conditions specified in the chapter ‘Technical specifications’ of this user
manual. Avoid heavy temperature fluctuations and do not switch the device on
immediately after it was exposed to temperature fluctuations (for example
after transport at low outside temperatures). Dust and dirt inside can damage
the unit. When operated in harmful ambient conditions (dust, smoke, nicotine,
fog, etc.), the unit should be maintained by qualified service personnel at
regular intervals to prevent overheating and other malfunction.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet)
matches the voltage rating of the device and that the AC outlet is protected
by a residual current circuit breaker. Failure to do so could result in damage
to the device and possibly injure the user. Unplug the device before
electrical storms occur and when it is unused for long periods of time to
reduce the risk of electric shock or fire.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly
react with the coating of your surface and after some time cause permanent
dark stains. In case of doubt, do not put the rubber feet directly on the
surface and use a suitable underlay if neces‐sary, i.e. felt pads or similar.
Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Wiring
Create all connections while the device is not connected to the mains. Use the supplied cables for all connections.
The following cable types are available:
- 5 standard cables (1:1), length 30 cm, each to supply one effects pedal
- 5 standard cables (1:1), length 60 cm, each to supply one effects pedal
- 1 Y-cable to supply one effects pedal with higher power consumption
- 1 serial cable to supply a maximum of 5 effects devices from one 9 V output socket of the power supply
Connect as shown in the drawing – one plug of the standard cable to the 9 V power supply input of an effects pedal, the other plug to a 9 V output socket of the power supply. In order to avoid an overload of the power supply, the current draw of each connected pedal must not exceed 120 mA.
Y-cable for devices with higher power consumption
Connect – as shown in the drawing – the single plug to the 9 V power supply
input of an effects pedal, the plug pair of the Y-cable to two 9 V output
sockets of the power supply. In order to avoid an overload of the power
supply, the current draw of the effects pedal must not exceed 240 mA.
Serial cable
The serial cable is used to power several effects pedals standing next to each other in a clear way. Connect – as shown in the drawing – the five output plugs of the cable to the power supply input of the effects pedals, the input plug of the cable to a 9 V output socket of the power supply. The total current draw of all effects devices connected via the serial cable must not exceed 120 mA; thus leaving a maximum of 24 mA to each effects pedal when using devices of the same kind.
Components and functions
- 1…5 Output sockets for 9 V ==
- 6 Red control light. Indicates that the device is connected to the power supply.
Technical specifications
| Output connections | Effects Pedal | 5 × output socket |
|---|---|---|
| Supply voltage | 230 V 50 Hz | |
| Current consumption | 30 mA | |
| Power consumption | 1.54 W | |
| Output voltage | 5 × 9 V (DC) | |
| Dimensions (W × H × D) | 116 mm × 38 mm × 77 mm | |
| Weight | 920 g | |
| Ambient conditions | Temperature range | 0 °C…40 °C |
| Relative humidity | 20 %…80 % (non-condensing) |
Further information
| 9 V | yes |
|---|---|
| 12 V | no |
| 18 V | no |
| Other secondary voltage | no |
| DC/AC current | AC/DC |
| Multi-power supply | yes |
Protecting the environment
Disposal of the packaging mate‐rial
- For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
- Ensure that plastic bags, packaging, etc. are properly disposed of.
- Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of your old device
- This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste.
- Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.