LoopTone DS-R08 Retro Radio Instruction Manual
- June 5, 2024
- LoopTone
Table of Contents
DS-R08 Retro Radio
Instruction Manual Retro Radio
Model: DS-R08
INSTRUCTION MANUAL
PLEASE READ THESE INSTRUCTIONS AND KEEP THEM FOR FUTURE REFERENCE. 1
Product Overview
Front View
1. AM/FM scale
2. AM/FM pointer
3. TUNING knob
4. Speaker Grill| 5. OFF/ Volume control
6. Power Indicator
7. Adjustable tone control knob (Bass and Treble)
8. AM/ FM /BT selector
---|---
Rear View 9. FM Antenna
10. AC power cord Plugs into a wall outlet.
Listening To FM Radio
- Turn the Unit on, Rotating the AM/FM/BT selector to select FM.
- Rotating the Volume Knob to adjust your desired volume level
- Rotating the TUNING knob to select your desired station
- Adjust antenna position to get the best receiving effect.
Listening To AM Radio
- Turn the Unit on, Rotating the AM/FM/BT selector to select AM.
- Rotating the Volume Knob to adjust your desired volume level
- Rotating the TUNING knob to select your desired station
Listening To External Audio Devices (Bluetooth Mode)
In Bluetooth Mode, This Unit can play music from external devices that are
Bluetooth Compatible.
Getting Connected Using Bluetooth
-
Turn the Unit on, Rotating the AM/FM/BT selector to select BT.
-
Rotating the Volume Knob to adjust your desired volume level
-
Set the Bluetooth function of your external device when the apparatus is on
-
Open Bluetooth settings on your external device.
Note: The effective distance between your external device and this unit is 10 meters -
Wait a few seconds for “Loop Tone” or “VRS-2800” to appear on the device list of your external device’s Bluetooth setting and select “Loop Tone” or “VRS2800” If your device asks for a password enter “0000” then press “OK”
-
. When the Bluetooth connection has been established successfully you will hear audible beeping and the LED light will stable flashing.
-
Start playback through your external device.
Tone control
Turn the Tone control knob to your desired tune- Treble or Bass.
Specifications
GENERAL
Wave range: …………………………FM:87MHz-108MHz, AM:530-1710KHZ
Power Requirements ……………………… Refer to the Rating label
Power Consumption……………………….. 7W
Dimensions( L X H X D) …………………… 24X11.8X16 cm
Weight ………………………………………… 1.28KG
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum
distance of 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>