CREATIVE OUTLIER AIR V3 True Wireless Sweatproof in Ear Headphone User Guide
- June 6, 2024
- Creative
Table of Contents
CREATIVE OUTLIER AIR V3 True Wireless Sweatproof in Ear Headphone
CONTROLS
CREATIVE APP
Set up your product, customize playback controls, personalize audio settings, enhance product’s performance, and more with the Creative app.
- Customize buttons for personalized playback experience
- Adjust noise control level through Ambient Mode and Active Noise Reduction
- Modify audio settings with Graphic EQ
- Perform software upgrades, product registration, and more
Download the Creative App from:
iOS App Store Google Play Store
EARBUDS FIT GUIDE
Gently push and wiggle the earbuds into the respective ear canal until a good seal is made to ensure proper fitting. Additional pairs of silicone tips are also provided so users can achieve an optimal fit.
CHARGING CREATIVE OUTLIER AIR V3 WIRELESSLY
Creative Outlier Air V3 supports Qi-enabled wireless charging. To charge both
the charging case and earbuds wirelessly, slot the earbuds into the case’s
magnetic charging slots, then place the charging case on the wireless charging
pad. Do note that the earbuds cannot be charged wirelessly without its
charging case.
Wireless charging pad not included
MASTER RESET
Touch the earbuds and hold for 5s while they are in the charging case. Earbuds
will blink once in blue upon completion of Master Reset. Master Reset is
reserved for cases where users encounter issues while earbuds are in use or
during situations such as: Bluetooth Pairing failure, random LED blinking,
failure to pair secondary earbud with the main earbud, or to reset all data.
Common Connectivity Issues
This article highlights a phenomena and recommendation for music cutting out
and earbuds that do not stay connected. When pairing a smart mobile device
with the earbuds, the signal is strongest when there is a line-of-sight
between the pairing devices. If the signal passes through the body, which is
mostly made up of water fluid, it may get absorbed, which may result in
pairing difficulty. If the mobile device is already connected to the earbuds,
it may result in signal lost or the earbuds may get disconnected.
TECHNICAL SPECIFICATIONS
Headphones Drivers
- 6 mm Bio-cellulose Driver x 2
- Frequency Response: 20–20,000 Hz
Microphones
- Type: Omni-directional x 4
- Frequency Response: 100–10,000 Hz
- Sensitivity (1 kHz): -38 dBV / Pa
Interface
- Qi-compatible wireless charging,USB-C (charging) Bluetooth Version Bluetooth 5.2
Bluetooth Profiles
- A2DP (Wireless stereo Bluetooth)
- AVRCP (Bluetooth remote control)
- HFP (Hands-free profile)
Wireless Operating Range
- Up to 10m / 33 ft
- RF Output Power: < 8 dBm
- Operating Frequency: 2402–2480 MHz
Battery
- Earbuds (Left and Right) Lithium-ion polymer battery: 3.7V 60 mAh 0.222 Wh
- Battery Charging Case Lithium-ion polymer battery: 3.7V 450 mAh 1.665 Wh
- Input Rating 5V 1A
- Total Playtime Up to 40 hours
- Charging Time 2–3 hours
- Audio Codecs AAC, SBC
- Operating Temperature 0–45°C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>