hama 00200016 65W Universal USB-C Notebook Power Supply Instruction Manual

: June 6, 2024
: Hama

Table of Contents

hama 00200016 65W Universal USB-C Notebook Power Supply
Explanation of warning symbols and notes
Package contents
Safety instructions
Start-up and operation
Care and Maintenance
Warranty Disclaimer
Technical data
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Hama

hama 00200016 65W Universal USB-C Notebook Power Supply

hama 00200016 65W Universal USB-C Notebook Power
Supply

Explanation of warning symbols and notes

Risk of electric shock This symbol indicates arisk of electric shock from touching product parts carrying hazardous voltage.
Warning: This symbol is used to indicate safety instructions or to draw your attention to specifichazards and risks.
Note: This symbol is used to indicate additional information or important notes.

Package contents

Universal USB-C notebook power supply unit
USB-C 2.0 Cable 3A(max. 60W)
These operating instructions

Safety instructions

Use the product only for the intended purpose.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Ensurethereissufficient scope for heat dissipation and ventilation.
Only use the article under moderate climatic conditions.
Do not use the product in areas in which electronic products arenot permitted.
Do not use the product in adamp environment and avoid splashing water.
Do not short-circuit the battery of the opened terminal device. Thereisa risk of explosion.
Protect the product from dirt, moistureand overheating and use it in dry environments only.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits specified in the technical data.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Make surethat cables do not pose atripping hazardor block emergency exits.
Do not bend or crush the cable.
As with all electrical products, this device should be kept out of the reach of children.
Do not modify the device in any way.Doing so voids the warranty.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately in accordance with the locally applicable regulations.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter,adapter cable or power cable is damaged.
Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.

Start-up and operation

Note: mains voltage 100 –240 V

The power supply unit is suitable for mains voltages of 100 –240 Vand thereforecan be used worldwide. Please note that acountry-specificadapter may be necessary.

Ensurethat your notebook requires asupply voltage of 5V /9V/12V /15V /20V (+/- 1Volt).
You can find this information on the original power supply unit or in your terminal device’s operating manual. If necessary,ask the dealer who supplied your terminal device or contact your terminal device manufacturer’s support service.

Warning

Do not use the universal notebook power supply unit if you areunable to definitively determine your terminal device’s supply voltage.
Ensurethat the total power consumption does not exceed the power supply unit’sratedoutput capacity of 65 W.
Failuretocomply with this may cause damage to the universal notebook power supply unit and the connected terminal device!

Note the instructions in your device’s operating manual. If these do not contain any instructions expressly to the contrary,proceed as follows:
Note: Power Delivery/Quick Charge

Plug &GO: no additional softwarerequired, simply plug in and start: Thanks to Power Delivery/Thunderbolt™ 3/Quick Charge, the voltage and power areadjusted automatically.
Be awarethat, for efficient and optimised charging, your terminal device must support the PD (Power Delivery)/TBT3 (Thunderbolt™ 3)/QC (Quick Charge) function.
If you have alarge number of PD/TBT3/QC-enabled terminal devices with different firmwareupdates, it may be that the function is not fully supported.
Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfromthe socket.
If using amulti-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
Connect the USB-C cable to the power supply unit and your terminal device.
Then connect the mains plug to aproperly installed socket.
The terminal device can now be used and switched on /charged.

Note: Disconnect the product from the mains after use.

Care and Maintenance

Note: Disconnect the product from the mains beforecleaning.

Only clean this product with aslightly damp, lint-free cloth and do not use aggressive cleaning agents.
Ensurethat no water is able to enter the product.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failureto observe the operating instructions and/or safety notes.