V-TAC VT-7719 Led Ceiling Light Dimmable Instruction Manual
- August 22, 2024
- V TAC
Table of Contents
V-TAC VT-7719 LED ceiling Light Dimmable
TECHNICAL DATA
- Model: VT-7719
- SKU: 23396
- Watts: 77W
- Lumens: 6700 Lm
- Beam Angle: CCT 3000K/4000K/6000K
- Material: Steel+Acrylic
- IP Rating: IP20
- Base Size: L370xW360xH30mm
- Dimension: 495x495x55mm
- Input Power: AC: 180-240V, 50Hz
Product Usage Instructions
Installation:
- Installation must be performed by a qualified electrician.
- Use screws to fix the mounting bar to the junction box.
- Make the wire connections with connectors.
- Proper grounding should be ensured throughout the installation.
- For indoor use only.
Remote Control Instructions:
- Assistant light ON/OFF
- Color Temperature Brightness Adjustment
- Automatic Change RGB
- Night Light Function
- Brightness and Color Temperature Adjustment
- Match/Cancel Match and Change Color Temperature
- Manual Change RGB
- Timing Function
Warranty Information:
This product comes with a warranty. For any issues or queries, please contact
support@v-tac.eu.
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Proper grounding should be ensured throughout the installation.
- For Indoor Use only
This marking indicates that this product should not be disposed of with other household wastes
Caution , risk of electric shock
REMOTE CONTROL INSTRUCTIONS
INSTALLATION DIAGRAM
- Switch off the power before starting the installation.
- Use screws to fix mounting bar to the junction box.
- Make the wire connections with connectors.
- Connect the live wire (L) from fitting to the live wire from main power supply.
- Connect the neutral wire (N) from fitting to the neutral wire from main power supply.
- Connect the earth wire from fitting to the earth wire from main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
- Use screws to fix canopy to mounting bar.
- Check if the installation is completed and turn on the power.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
FAQ
Q: Can the light source of the luminaire be replaced?
A: No, the light source is not replaceable. When it reaches the end of its
life, the entire luminaire should be replaced.
Q: What is the IP rating of the product?
A: The IP rating of the product is IP20, indicating protection against solid
objects larger than 12mm and having no protection against water.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>