OZARK RGB Corner Floor Lamp Instruction Manual
- June 7, 2024
- OZARK
Table of Contents
OZARK RGB Corner Floor Lamp
Thank you for shopping with Ozarké, we appreciate your business. Our goal is to provide excellent customer service before, during and after delivery. We’ve included a guide on how to install this light, should you require additional assistance please feel free to email us at [email protected] and one of our customer service reps will reach out to assist you.
WARNING!
- Do not use the power supply beyond the specified range (100-240V,50Hz).
- Avoid scratching the surface and wires of the lamp during installation.
- Do not install the lamp outdoors.
- The lamp should not be close to corrosive chemical objects or gases.
It should not be washed with water. It can only be wiped with a clean soft cloth.
Installation Instructions
Tools and Materials You’ll Need
- Metal Base
- Metal base + Wire
- 5 screws
- Allen key tool
- Non-slip pads
- Adapter cord
- Remote
Instructions
- Remove lamp pieces from the package gently.
1| __
Connect tools A and B to the LED bar.
---|---
2| __
Use tools C and D to secure the base of the lamp.
3| __
Repeat step 2. Attach tool E to the base of the lamp.
4| __
Carefully attach tool F to the lamp cord and plugin
Touch Symphony Controller Instruction Manual
Basic parameters
- Working voltage: 5-24V
- Effect mode: >300 model
- Control points: Max up to 1024 pixels points
- Remote control distance: Mini version 30 meter
- Battery model: 2 pcs No.7 (3A) batteries (remote control battery)
Remote Control Button Function
ON/OFF
- Short press the on/off button to cycle the controller to switch on and off.
Play/Pause
- Press the pause button in dynamic mode, and the light will stop moving
- Press the colour ring and then press the play button, the control panel will enter the auto-play mode
- Long press the Play/Pause button for more than 5S to enter the setting mode, and the light strip will appear white. At this time, you can adjust the line sequence and number of the light strip.
Speed+
- Short press in dynamic mode can increase the speed of light transformation
- Under the setting state, press the button to increase the number of lights.
Speed-
- Short press in dynamic mode can reduce the speed of light conversion
- Under the setting state, press the button to reduce the number of lamp strips.
Brightness + / -:
- Add and subtract the brightness of the light；
- Press the button in the setting state to adjust the line sequence of the lamp belt
Mode+/-:
- The mode can be looped up and down
Adjust colour ring
- At any stage, press or slide the colour ring to adjust the colour of the lamp strip to the corresponding colour
Autoplay function
- Press the “Color Adjustment Ring” and then the “Play” button to loop from the first effect
Adjustment point function
- Press the “On/Off” button to shut down the machine. In the shutdown state, long press the “Play/Pause” button to enter the setting state (white light will be on). At this time, press the “Speed +” and “Speed -” button to adjust the points
Line sequence adjustment function
- Press the “On/Off” button to shut down the machine. Under the shutdown state, long press the “Play/Paid” button to enter the setting state (white light will be on). At this time, press “Brightness +” and “Brightness -” to adjust the line order.
Remote control code/clear code function
- In any case, long press the “on/off” button to carry out a cycle of code clearing and code checking of the controller. When the code is successful, the blue light flashes quickly. At this time, only the remote control can control the controller. When code clearing is successful, the yellow light of the light bar will flash slowly. At this time, all the same, remote controls can control the controller, which is the passcode state (the factory default passcode).
Wiring diagram
Documents / Resources
|
OZARK RGB Corner Floor
Lamp
[pdf] Instruction Manual
RGB Corner Floor Lamp, RGB, Corner Floor Lamp, Floor Lamp, Lamp
---|---