PHILIPS LLC7730-00 Group Cabinet Control Owner’s Manual
- June 1, 2024
- Philips
Table of Contents
PHILIPS LLC7730-00 Group Cabinet Control
Product Information
- Specifications
- Product Name: LLC7730/00 Coded Mains Receiver LN
- Full Product Name: LLC7730/00 Coded Mains Receiver LN
- Full Product Code: 871869672393700
- Order Code: 913713612080
- Material Nr. (12NC): 913713612080
- Net Weight (Piece): 0.075 kg
- EAN/UPC – Product/Case: 8718696723937
- Numerator – Packs per Outer Box: 60
- EAN/UPC – Case: 8718696723944
Product Usage Instructions
- Installation
- Ensure the power source is turned off before installation.
- Mount the LLC7730/00 Coded Mains Receiver LN in the desired location using appropriate hardware.
- Connect the necessary cables according to the provided wiring diagram.
- Turn on the power source and test the functionality of the receiver.
- Operation
- To control the lighting group, use the designated control interface or remote.
- Follow the manufacturer’s instructions for programming and setting up the receiver for specific lighting configurations.
- Ensure proper communication between the receiver and the control device for seamless operation.
FAQs
- Q: How do I reset the LLC7730/00 Coded Mains Receiver LN?
- A: To reset the receiver, locate the reset button on the device and press it for 10 seconds until the LED indicators blink.
- Q: Can I use multiple receivers to control different lighting groups?
- A: Yes, you can install multiple receivers and assign them to different lighting groups for independent control.
INTRODUCTION
LLC7730/00 Coded Mains Receiver LN
- Philips Group Cabinet Control enables remote grouping, monitoring, and controlling of diverse outdoor luminaires.
- Customers can control their lighting installations, through a retrofitted modular cabinet solution at the electrical cabinet.
- Supports optimized energy consumption and manages KPIs better.
- The solution autonomously executes complex tasks based on the configurations.
- The Controller can automatically switch between different available communications carriers to provide stable and reliable communications to Interact application(s).
Warnings and Safety
- Refer to the Documentation portal for all technical documents (https://www.partner.portal.signify.com/)
- Check the local LTE band applicable before placing an order for the controller
- No UL certification in Gen3 controller and modules
- Update forecast for Gen3 in Koolog tool to ensure on-time delivery for projects
Product data
- Order product name LLC7730/00 Coded Mains Receiver LN
- Full product name LLC7730/00 Coded Mains Receiver LN
- Full product code 871869672393700
- Order code 913713612080
- Material Nr. (12NC) 913713612080
- Net Weight (Piece) 0.075 kg
- EAN/UPC – Product/Case 8718696723937
- Numerator – Packs per outer box 60
- EAN/UPC – Case 8718696723944
Group Cabinet Control
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial order and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
- www.lighting.philips.com.
- 2024, April 11 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>