G3 FERRARI G20141 Easymix Hand Blender User Manual

June 13, 2024
G3 FERRARI

G3 FERRARI G20141 Easymix Hand Blender

Product Information

  • Model: G20141
  • Technical Model: HB806-400
  • Product Name: Hand Blender EASYMIX
  • Brand: G3Ferrari
  • Website: www.g3ferrari.it
  • Languages: IT, EN, PT, ES, DE, FR

Protection Classes: This product should not be exposed to rain or humidity to avoid the risk of electric shock.
Caution : If the appliance is no longer in use and you have decided not to repair it, it is recommended to render it unusable by cutting the power cord. Do not bring the power cord close to objects.

Usage Information:

  1. The blade of the immersion shaft is sharp, be careful not to cut yourself during use, cleaning, and removal.
  2. Before first use, carefully wash the parts that will come into contact with food: shaft, accessories, and blades.
  3. To avoid motor overheating, do not use it continuously, allow at least 5 minutes of rest between uses.
  4. Do not operate the product without any food inside.
  5. Before starting the appliance, ensure that all parts are correctly assembled.
  6. Attention! Disconnect the plug from the electrical outlet before touching the blades for cleaning or removing food stuck during operation.
  7. Attention! Disconnect the plug from the electrical outlet after use and/or before touching the blades and/or before assembling or disassembling any accessory.
  8. For cleaning the shaft and accessories, it is recommended to use warm water and limit the use of detergents. Rinse thoroughly in this case. Do not immerse the upper part of the mixer in water or other liquids; use a damp cloth to clean it.

Parts List (G20141):

  1. Switch low speed
  2. Switch high speed
  3. Motor body
  4. Blocking the shaft
  5. Immersion shaft
  6. Blades

Technical Specifications:

  • Do not subject the product to strong impacts, serious damages may result.
  • Do not use near or under flammable materials (like curtains), heat, cold spots, and steam.

Product Usage Instructions

  1. Assemble the motor housing to the immersion stainless-steel shaft by following the instructions in the “Assembling the shaft” section.
  2. Plug the unit into an electrical outlet.
  3. Insert the mixer into the bowl containing the food to be blended, ensuring that the entire blade is immersed to avoid splashing.
  4. Press the button (speed I or II) to start operating. For best results, follow the instructions in the “Setting processing speed” section.
  5. Caution! Do not insert your fingers inside the bowl containing food.
  6. Unplug the hand blender from the electrical outlet once finished working.
  7. This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milkshakes, etc.

PROTECTION CLASSES

WARNING
ELECTRIC SHOCK RISK

  • DO NOT EXPOSE TO RAIN OR MOISTURE

  • This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.

  • Class II Appliance symbol. The double-insulated electrical appliance is one that has been designed in such a way that it does not require a safety connection to the electrical earth/ground.

  • Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner’s guide.

SAFETY INSTRUCTIONS

The following are important notes on the installation, use, and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use. Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service center; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label is compatible with those of the electricity grid; the installation must be performed according to the manufacturer’s instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof. If it is necessary to use adapters, multiple sockets, or electrical extensions, use only those that comply with current safety standards; in any case, do not exceed the power consumption limits indicated on the electrical adapter and/or extensions, as well as the maximum power, is shown on multiple adaptors. Do not leave the unit plugged in; better to remove the plug from the mains when the device is not in use. Always disconnect from the power supply if you leave it unattended. Cleaning operations should be carried out after unplugging the unit. If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting the power cord.

  • Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
  • Do not use the appliance in the event of damage to the power cord, or plug, or in case of short circuits; to repair the product only address an authorized service center.
  • Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.
  • This appliance cannot be used by children, even if they’re more than 8 years old.
  • This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  • Children must not play with the appliance.
  • Keep the appliance and its cord out of reach of children less than 8 years.

If the power cord is damaged, or in case of failure and/or malfunction do not tamper with the unit. The reparation must be done by the manufacturer or by a service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit’s safety and invalidate the warranty.

  • This appliance is intended to be used in households and similar applications such as staff kitchen areas in shops, offices, and other working environments; by clients in hotels, motels, and other residential type environments; farm houses, bed, and breakfast type environments.
  • The appliance is not intended to be operated by means of an external timer or a separate remote-control system.
  • Before every use, unroll the power cord.
  • Use original spare parts and accessories only.
  • Do not subject the product to strong impacts, serious damages may result.
  • Do not use near or under flammable materials (like curtains), heat, cold spots, and steam.

GENERAL INSTRUCTIONS

  • The blades of the hand blender are very sharp to chop: Be careful not to cut yourself during cleaning operations and/or when removing the attachments. To avoid overheating of the motor, do not use the appliance running continuously for more than 30 seconds, then make at least 5 minutes rest. Do not use the product without food.

  • Do not insert your fingers inside the bowl while the mixer is running.

  • Before using for the first time, carefully wash the parts that will be in touch with food: immersion cone, accessories, and blades.

  • Before operating the appliance, check that all the parts are correctly installed.

  • Never leave the appliance unattended while it is running.
    CAUTION! Unplug the unit from the socket before touching the blades for any reason, such as cleaning or food removal.
    CAUTION! Always unplug the unit from the electrical outlet each after use and/or before touching the blades and/or before installing or removing any accessory or attachment.

  • To clean the immersion cone and the accessories, it is recommended using warm tap water and containing the use of detergents. When cleaning with detergents, rinse thoroughly.

  • Do not immerse the top of the mixer in water or other liquids, clean it with a damp cloth.

PARTS G20141

  1. Switch low speed
  2. Switch high speed
  3. Motor body
  4. Blocking the shaft.
  5. Immersion shaft
  6. Blades

OPERATING

  • Assemble the motor housing to the immersion stainless-steel shaft as in the “Assembling the shaft” section.

  • Plug the unit to the electrical outlet.

  • Insert the mixer in the bowl with the food to blend (ensure to immerse the entire blade to avoid any splashing).

  • Press the button (speed I or II) to start operating. For best results, follow the instructions in the “Setting processing speed” section.
    CAUTION! Do not insert your fingers inside the bowl containing food

  • Unplug the hand blender from the electrical outlet, once finished working,

This appliance is not suitable for chopping hard foods or ice. It is suitable for making baby food, milkshakes, sauces, juices, cocktails, soups, vegetable soup, etc.
When processing fruits or vegetables, add also a small quantity of water to allow the device to operate in a homogeneous way.

Assembling the shaft

Insert the shaft (6) in the motor body (4) and rotate clockwise until it blocks. For unblocking, rotate clockwise.

SETTING THE WORKING SPEED

  • The unit features two working speeds (2 and 3 buttons).
  • For best results and to avoid overheating, it is recommended to use the unit for short and regular intervals, then for a long time, always making circular movements inside the container of food. It is also recommended to start processing food from the first speed, ending up using the faster speed.

CLEANING

  • Unplug the unit from the electrical outlet.
  • Do not immerse the motor body in water or other liquids, but wash it with a damp cloth and non-abrasive detergent. Avoid any infiltration of water inside the motor housing.
  • Shafts, blades, and accessories can be washed like normal dishes, with a non-abrasive sponge and mild detergent. Dry them thoroughly before assembling them to the main body.
  • For quick cleaning of the blades of the shaft during different processes, insert the hand blender into a cup filled with water and operate for a few seconds.

TECHNICAL FEATURES

  • Power supply: AC 230V~50-60Hz. 400W
  • 2 working speeds
  • Ergonomic motor housing
  • Detachable shaft

WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT

The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can be recycled. It’s our duty to contribute to the ecological health of the environment by following the correct procedures for disposal. The crossed-out wheelie bin symbol indicates the product complies with the requirements of the new directives introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC) and must be properly disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place of residence. Those who do not dispose of the product as specified in this section shall be liable according to the law.
To find the nearest service center, please call the telephone number 0541 694246, fax number 0541 756430, or contact us at assistenzatecnica@trevidea.it asking for the service center’s supervisor.

The appliance conforms to the pertinent European regulations and is therefore marked with the CE mark.
www.g3ferrari.it  
TREVIDEA S.r.l.
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals