hama 00118124 TV Wall Bracket Instruction Manual

hama 00118124 TV Wall Bracket

Required tools

Installation kit

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Package Contents

• TV wall bracket
• TV support arms (2x)
• Drilling template
• Cable ties
• Installation kit (see contents, Fig. 1)
• These operating instructions

 Safety Notes

Warning

• Given the multitude of terminal devices and wall structures available on the market, the supplied mounting kit is unable to cover every option.
   It occasionally happens that the screws for attaching the terminal device to the wall bracket are too long.
   Please note that the supplied wall plugs are for use with concrete brick and solid brick walls only.

• Read the operating instructions for your terminal device before attempting to mount it. The instructions provide information about the type and measurements of suitable fastening materials.

• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device, purchase these from a specialised dealer.

• If the wall on which the bracket is to be mounted is made of different material types and construction types to those specified, purchase suitable mounting materials from a specialised dealer.

• Never apply force during mounting. This can damage your end device or wall bracket.

•  If in doubt, have this product mounted by a qualified technician – do not attempt to mount it yourself!

• Do not mount the product above locations where persons might linger.

• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe to use.

• You should repeat this check at regular intervals (at least every three months).

• When doing so, ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding the maximum permitted dimensions is attached.

• Make sure that the product is loaded symmetrically.

• During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying capacity is not exceeded.

• Maintain the necessary safety clearance around the attached load (depending on the model).

• In the event of damage to the product, remove the attached load and stop using the product.

Intended use and specifications

• The bracket is used for wall mounting flat panel displays for non-commercial, private household use.
• The bracket is only intended for use within buildings.
• Use the bracket only for the intended purpose.
• Maximum load bearing capacity: 35 kg
• Screen size: 81.0 – 165.0 cm (US: 32″ – 65″)
• Depth: 9.0 – 42.5 cm
• Angle: –/+ 15°
• Pivoting range: up to 180° on 3 joints (depends on the device)
• Wall mounting plate dimensions: 29.7 x 17.8 cm
• Mounting holes: according to the VESA standard until 400×400

Installation requirements and installation

Note
 Only mount the TV wall bracket with the help of a second person. Get the support and help you need.
 Different end devices have different options for connecting cables and other devices. Before installation, ensure that the necessary connections will still be accessible after installation.
 The same mounting kit is included with all of our TV wall brackets. Depending on the product and mounting type, you may not need to use the entire mounting kit. Unneeded screws and other small parts may be left over, even if the wall bracket is properly mounted. Keep these leftover parts with the operating instructions in a safe place, just in case you might need them later on (e.g. should you move, sell the product, mount the wall bracket in a different location, buy a new TV, etc).

Warning

• This product is suitable for wall mounting only.
  Before installing the bracket, ensure that the wall on which the television is to be mounted is suitable for the weight and make sure that no electrical wires, water, gas or other lines are located at the installation location.

• Please note that the provided wall anchors are only approved for concrete and solid brick walls.

• Observe the other warnings and safety instructions.

• Proceed step-for-step in accordance with the illustrated installation instructions (Fig. 1 ff.).

•  During installation, the hinges are to be adjusted so that the TV can be moved side-to-side.

• Check whether your television is level using the included spirit level. If necessary, adjust the television plate.

Setting and maintenance

Note
Only adjust the TV wall bracket with the help of a second person. Get the support and help you need.

• Screws do not have to be loosened for lateral movement.
• The resistance for the tilt adjustment and lateral movement can be adjusted using the corresponding screws.
• To secure, insert the carrying arms into the TV plate and tighten both of the screws.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months). Only use water or standard household cleaners for cleaning.

References

• Offizieller Hama Onlineshop | Hama DE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>